Does OS X Server 10.6 Snow Leopard support client Time-Machine backups

Hello,
Does OS X Server 10.6 Snow Leopard support multiple clients(20+) Time-Machine backups via LAN?
Thanks,
-Mike

mausimo wrote:
If the 20 users had 500GB hard drives and were planning on filling them, wouldn't i theoretically only need double the space to backup their computers?
I'm not quite sure what you mean by this. If your 20 users had 500GB hard drives, then your total HD capacity would be 10,000GB, or 10TB. Double would be 20TB, which is more than I recommended. The 15TB (1.5 x the amount of data you would theoretically be backing up) would be plenty.
That said, the DroboPro has a maximum of 16TB using currently available 2TB drives, so I would feel confident in recommending that to you. Realistically, your users probably aren't all going to fill their hard drives to capacity, so you might find you need even less.
If I were you, I would look at how much data is on each hard drive right now, add it all up, multiply it by 1.5, then throw in an extra TB for good measure. I would only purchase enough drives to handle that capacity. As your users take up more space, you can order more drives and add them to the DroboPro.
For example, if each user was using an average of 200GB currently, then for 20 machines you would have a total of 4,000GB, or 4TB. I would put 3x2TB drives in the DroboPro, giving you a total of 6TB (minus overhead) of backup capacity. From there, you can add more 2TB drives as you need them. This is almost identical to a system I manage for a client and it works very well.
I hope this helps!

Similar Messages

Restore data (iTunes Library, Photo's, files etc.) to Snow Leopard from a Time Machine backup made on OSX Lion?

Hi,
I have OSX Lion and have been backing up to Time Machine, I now want to do a clean install of Snow Leopard (not from backup), but can I restore my data (iTunes Library, Photo's, files etc.) to Snow Leopard from a Time Machine backup made on OSX Lion?
Thanks.

You should be able to restore iTunes and iPhoto files if the Lion system was running the same version of those applications that you'll have on the Snow Leopard system. However, you won't be able to restore files for applications like Mail, Address Book, or Safari, as the versions of those won't match.

I just hate Lion OS. Can I go back to snow leopard using my time machine backups?

I just hate Lion OS. Can I go back to snow leopard using my time machine backups? it's a big mess... no more rosetta or Isync ot network usefulness for me... how do I go back to snow leopard using my time machine backups without losing the files i created after the "Lion upgrade"? I want to restore my whole Macbook, but fear to lose these recently created files, some help?

mauijiminar
Don't patronise him. This is Apples fault. Next time dont comment if you have nothing good to say!

Issue installing Snow Leopard thru the Time Machine backup.

Might be a beginners Q, but I will ask because it's not being solved somehow.
I've tried installing the 10.6 Snow Leopard a few times but am confused. First time I installed without restoring the whole Mac HD from a backup few days ago (which I want to do because it is having trouble with my current Mac HD settings. I did this for the 2nd attempt)
When I did this, though I probably had every file there, I had major problems with my permissions(some files don't let me access says I have no permission) Also it was like the whole setting I had in 10.5.8 was gone.... What I thought is if I did a upgrade, everything will stay the same and all that will happen is it will become 10.6 snow leopard.
So next I restarted with inserting SL disk, and restarted the computer to install the SL and also restore my system from few days ago from time machine backup. This started and it did the restoration, and when everything is done, it is back to my 10.5.8 setting I want....but no 10.6 upgrade done(ie still 10.5.8) I am so confused. I did all this with my snow leopard disk but no upgrade happened!!
Am I missing some step? If someone can point out something that will be great.
Thank you,
n

Glenn Carter wrote:
First, what OS version were you running before you attempted the first restore? Approximately, what was the date and time of the last Time Machine backup before you attempted the first restore? That is the backup snapshot you want to aim for if you attempt another restore. However...
...have you permitted Time Machine to resume backups since the first restore attempt? If "No", then good. Do the following:
a. Wipe the drive again.
b. Install SL from the DVD (Do Not perform a "Restore..."), just a simple install of SL.
c. At the end, when given the opportunity to migrate your user accounts & apps from your Time Machine backup do it. If the most recent TM backups contained your most up-to-date user account, then it should migrate the most recent data & apps.
d. Then use Software Update to bring the system up-to-date.
If, however, you have permitted Time Machine to resume backups since your first restore attempt (described in your original post) then the user account you are after is no longer available for migration. You will need to do the following:
a. Using the SL DVD, perform a "Restore System form Backup...". Make sure you go back and pick the correct date and time that represented your user account before you performed the first restore (described in your original post). It should bring your system back to what it was before but only if you choose the correct date and time.
Any further questions?
Glenn Carter wrote:
First, what OS version were you running before you attempted the first restore? Approximately, what was the date and time of the last Time Machine backup before you attempted the first restore? That is the backup snapshot you want to aim for if you attempt another restore. However...
...have you permitted Time Machine to resume backups since the first restore attempt? If "No", then good. Do the following:
a. Wipe the drive again.
b. Install SL from the DVD (Do Not perform a "Restore..."), just a simple install of SL.
c. At the end, when given the opportunity to migrate your user accounts & apps from your Time Machine backup do it. If the most recent TM backups contained your most up-to-date user account, then it should migrate the most recent data & apps.
d. Then use Software Update to bring the system up-to-date.
If, however, you have permitted Time Machine to resume backups since your first restore attempt (described in your original post) then the user account you are after is no longer available for migration. You will need to do the following:
a. Using the SL DVD, perform a "Restore System form Backup...". Make sure you go back and pick the correct date and time that represented your user account before you performed the first restore (described in your original post). It should bring your system back to what it was before but only if you choose the correct date and time.
Any further questions?
<<<<First, what OS version were you running before you attempted the first restore?
It was 10.5.8
And the rest it was confusing and before I read your post I have gone to the apple store late afternoon today.
I explained the above and I was suspecting the permissions deal was causing the problem. What the mac guy did was went to some option to repair my user account permissions and everything worked out!!
When the guy did this I had the 10.6 system with lotta files having permission problems and also lotta small settings gone. But when repairing the user account permissions, all the settings came back and the os was 10.6!
Bottom line I think I screwed up account settings bad, and that was causing the problem.
thanks again glenn for all your help. If all goes wrong again, I will definitely follow some of the advice you mentioned here(^^)
cheers,
n

Snow Leopard forgets my Time Machine backups

I have just installed Snow Leopard on 4 machines and on each of them unless I keep selecting the time capsule backup folder from the preferences page it is only showing time machine backups from when Snow Leopard was installed. e.g. today.
Any ideas?

This has been reported by a few people.
What some people found was if they opened TM and closed it then opened it a second time it sees the old backups. You could give this a try. Also try repairing permissions on the open sparsebundle. Make sure you make a copy first incase of problems.

Clean installed Snow Leopard, but Lion Time Machine backup was not recognized.

I erased the Macintosh HD and clean installed the Snow Leopard. But when I try to use the Time machine backup to recovery my documents, the external hard disk can not even be recognized. It says "To use this disk, connect it to a Mac with Mac OS X v10.7 or later. The format of the disk was created using Lion which can not be read by Snow Leopard." The fact is that the format of the disk is Mac OS Extended (journaled) and was indeed created by Lion from windows format. So how can I read the disk using Snow Leopard? Thanks.

I it a general problem, affecting e.g. a Mac with multiple partitions. I get the same with trying to mount 10.7 from 10.6.8.
Not ideal. Hope a fix will be found. I'd suggest to report this to Apple.

Is it possible to reinstall Snow Leopard without a Time Machine backup?

I have Lion but I absolutely loathe everything about it and want Snow Leopard back; I have my SL install disk but everything I've read says I'll need a Time Machine backup which I don't have. If I try to downgrade, will I lose all my programs and things? Is there a way around that at all?

Unfortunately, Time Machine will not backup a NAS (e.g. AirDisk). AirDisk can be used as a TM backup drive as you have already discovered. The only way to backup the iTunes library on your HDD is to connected directly to your Mac. TM will be able to back up to your 1TB HDD connected to your Extreme. If you are dead set with keeping your iTunes connected to your Extreme, I believe CarbonCopyCloner (donateware) or SuperDuper! (purchase) may support backup of a NAS to a NAS.
P.S. I've notified the moderator to remove your second post.

Does Snow Leopard support Face Time?

Does Snow Leopard support Face Time or must i upgrade to something else? I am on a MacBook Pro Version 10.6.8 Thanks

Yes it does. See below.
http://support.apple.com/kb/ts4185

How do i set up a new lion imac from a snow leopard imac using time machine?

How do i set up a new lion imac from a snow leopard imac using time machine?

Connect the two via Firewire cable - Transferring files between two computers using FireWire. Boot the old iMac into Target Disk Mode. Boot the new iMac normally.
If you are starting the new iMac for the first time then do the above before you turn on the new iMac. After you turn on the new iMac you will begin in the Setup Assistant. When you complete the registration screens you will be offered an opportunity to migrate your data from another Mac. Follow the instructions to migrate your old Home folder, third-party applications and support files, and system preferences to the new iMac.
If you have already gone through the Setup Assistant and created an initial admin user account, then you do the connection step but will use Migration Assistant in the Utilities folder of the new iMac.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB. Right now it seems to back up my users all day long. I set their time machine interval to every 5 hours but it still runs all day long and is very slow. Server is on a new Mac Server mini.

AFAIK, there is no user limit.. it is simply a question of the network load. AFP is a fairly clean protocol.. but TM is not.. it does a lot of testing of the backup.. infact your setting of 5hour gap could well make it worse.
I would sort out the clients that are doing 100GB backups to a different backup location.. no matter how fast your network.. 100GB takes time to backup.. and over wireless forever.. it will never end.
I guess some of these clients are on wireless?? I would separate the TM of wireless to those that are wired. No more than 4 or 5 wireless clients to a target device. Otherwise you are saturating your network with backup data. And use 5ghz.. so close by.. it is much faster than 2.4ghz and you will get much better transfer rates.

Re-installed OS X Server who to re-use clients Time Machine Backups?

Hi all!
For some reason one of my disks in my Mac Mini Server stopped working. So I had to re-install OS X Server.
My client, a MacBook Pro, did its backup towards my Mac Mini Server OS X Server. Now I am curious about if OS X Server is able to re-use that Time Machine backup so that my MacBook Pro client can continue to backup to that Time Machine "file"?
Anyone experienced this?
Regards,
Andreas

If you have not modified your MacBook Pro, you should be able to carry on using the Time Machine backup in your Mac mini Server without any problem. Just set up your MacBook Pro to make backups in your Mac mini Server, and your existing backup should be used without any problem

Restore to Snow Leopard from Lion Time Machine

Hello,
I want to downgrade from OS X Lion to Snow Leopard (due to numerou reasons being discussed all around). Problem is, after upgrading to Lion, I erased my Snow Leopard Time Machine backup, and created a new one while running Lion (I edited a lot of files and stuff). My question is once I downgrade to SL, using the method of erasing the HDD completely and doing a fresh install, can I restore my backup from the Time Machine created in Lion? If no, then how can I access my files and folders in Snow Leopard then.
Sorry if this has ben posted in the wrong section, but I would appreciate some help on this.
Cheers
~n~

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

How to install or replace lion on Mac OS X Leopard simultaneously reinstall time machine backup of OS X Leopard

Hi, I am new or know nothing about Mac Mini which I received from relative as gift along with few software including lion OS.
I want to install lion after time machine backup of current files Mac OS X 10.6.8.
MY question is that backup of Mac OS X 10.6.8 can be installed or copied on newly installed Lion software.
Thanks in anticipation.
Raj

Only third-party applications and the user's admin folder. Since Lion succeeds Snow Leopard, you cannot restore the system software without first erasing the drive. That means you must have the Snow Leopard installer DVD.
I would simply upgrade the Snow Leopard system with Lion:
How to Install Mavericks, Lion/Mountain Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to
      the Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before
      installing the update unless you will boot from this drive and install the
      update on it. Reconnect it and turn it back on after installation is
      complete and you've restarted.
2. You may experience unexpected results if you have installed third-
      party system software modifications, or if you have modified the
      operating system through other means. (This does not apply to
      normal application software installation.)
3. The installation process should not be interrupted. If a power outage or
      other interruption occurs during installation, use the standalone
      installer (see below) from Apple Downloads to update. While the
      installation is in progress do not use the computer.
D. To upgrade to Lion/Mountain Lion, Mavericks:
1. Purchase the Lion/Mountain Lion Installer from the Mac App Store.
      The download should start quickly. Lion is nearly 4 GBs so a fast
      internet connection is essential. Download time could run upwards of 4
      hours depending upon network conditions and server demands at the
      time. Note that Mavericks is FREE.
2. The installer will run automatically after the download is completed.
      Click on the Install button to begin the upgrade.
3. Follow instructions for installation.
Also see:
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

What's the best approach to migrate to Snow Leopard using the time machine?

I have a time capsule, and have noticed the restore from backup option once I had to replace the HD on my MacBook Pro.
I am about to buy a new MacBook Pro which will probably ship with Snow Leopard, and am wandering, if when I setup the new OS I can restore from a backup of my old system?
Thanks
Miguel

don't use the full system restore from backup option with a new computer. that can only be used on the same exact computer. also, that option erases the destination drive and replaces it with the copy of the backed up system. this is not what you want.
when you first turn on the new computer you'll get a setup assistant which will give you an option to Migrate your user data and applications from a TM backup. you can also do it later using Migration Assistant located in Applications/Utilities.

Downgrade from Mavericks to Snow Leopard without using Time Machine

Hello.
I upgraded from Snow Leopard (OSX 10.6.8) and upgraded to Mavericks but the Time Machine was not turned on. Is there anyway to downgrade back to Snow Leopard?
I contacted Apple Support and was told that it is not advisable to format the drive and do a clean install using Snow Leopard installation Cd's since Mavericks made changes to the hardware on the iMac. They advise using time Machine to downgrade, but this option is not available to me. Is this true?? Or can I re-install Snow Leopard with no issues?
Thanks.

Mavericks - reverting back from:
https://discussions.apple.com/docs/DOC-6162

Does OS X Server 10.6 Snow Leopard support client Time-Machine backups

Similar Messages

Maybe you are looking for