Does P965 Platinum work with 4GB Ram?

I'm using Vista 64 bit Ultimate with 2x1GB ram. I want to buy another 2x1GB kit (just because RAM is so cheap now), but there seem to be some posts that say the motherboard can't use all the memory even thought the manual says it should support it. Is anyone out there actually using 4x1GB on this board successfully? Thanks.

Please ignore my comment. I saw 'platinum' and my brain filled in p6n. My badQuote from: JoeWPgh on 13-May-07, 04:10:00
There's a thread here about Vista 64 and 4 gig RAM running very slowly. You might want to read through it. The upshot of it is that flashing the BIOS to beta 1.22 seems to have solved most people's (including mine) problem.

Similar Messages

X-Fi Driver doesn't work with 4GB RAM - Verif

I have a X-Fi Platinum and 4GB RAM?( windows XP can only recognize 3GB memory).
Then
Install the latest X-Fi driver on Win XP SP2, it works w/o any problem
I?format the HDD, install windows 2003 R2 SP2 Standard (Win2003 can recongize 4GB ram)
I install ?the same X-Fi?driver. After reboot, I can only hear crackling from the sound card,
Then I edit the boot.ini file by adding /maxmem=4096, reboot, now the sound card works w/o any problem
Creative, could you please improve you X-Fi?driver by considering the large ram issue ?
Message Edited by netsonicyxf on 08-28-200702:40 AM

JohnZS wrote:
I might be wrong, and if I am wrong then could someone correct me, but as far as I knew, Creative Cards do not support Windows Server 2003. I maybe wrong, have you tried the latest BETA driver (see exciting news thread)John
In windows 2003, the driver works if I limit the total ram to 4096MB by adding /Maxmem=4096 in boot.ini file.
FYI
/maxmem
The /maxmem parameter limits the physical memory available to Windows.
/maxmem=SizeInMB
Subparameter
SizeInMB
Specifies the maximum amount of physical memory available to Windows. Enter a decimal number that represents the amount of memory in megabytes.
Comments
This parameter actually limits Windows to memory addresses less than or equal to the specified value. Because some memory within the remaining address space might be reserved for nonsystem use, the actual memory available to Windows might be less than the amount that you specify.
The /maxmem parameter is supported only on Windows Server 2003, Windows XP, and Windows 2000. On Windows Server 2003 and Windows XP, use /burnmemory to limit system memory more precisely. On Windows Vista and later versions of Windows, use the removememory or truncatememory parameters with the BCDEdit /set command
You can use this parameter to test a driver in low memory conditions. For example, you can use this parameter to limit a computer with GB of memory to 256 MB of memory.

Using a MacBook Intelcore 2 Duo 2,2GHz (3,1)with 4GB RAM. I can`t install Mac OS X 10.6 Snow Leopard

Using a MacBook Intelcore 2 Duo 2,2GHz (3,1)with 4GB RAM. I can`t install Mac OS X 10.6 Snow Leopard?? Need Help!

That machine requires the 10.6 white retail disks, gray or black machine specific ones from another Mac won't work.
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Will my MacBookPro3,1 Intel Core 2 Duo, 2.4 GHz with 4GB Ram run Mountain Lion?

Hi everyone. I have a MacBookPro3,1 Intel Core 2 Duo, 2.4 GHz with 4GB Ram — will it run Mountain Lion? My hard drive has 615 Gigs of free space. If so, is it worth it for me to upgrade? Will all the new features be available to me. Presently I am running Mac OS X Lion 10.7.4 (11E53). I heard that there is an update 8.1 out there with developers as of yesterday.
Thanks.

Hi John.
Yes, an erase and install sounds like a good idea. I just need to check my Adobe CS5 software to see if I need to upgrade the suite. If that is the case, then I may need to put it off for a bit. Thanks so much for your help.
I have a newer MacBook Pro at work, but usually wait to upgrade it, till I've been running it at home on my personal computer for a while. Would hate for it to mess up my production schedule.
Thanks again and have a good evening.

Any suggestions, or fixes, as to why I have to rebuild my library after EVERY shutdown? I am running the latest 10.6, 2.92 ghz iMac core 2 duo, with 4gb ram.

Any suggestions, or fixes, as to why I have to rebuild my library after EVERY shutdown? I am running the latest 10.6, 2.92 ghz iMac core 2 duo, with 4gb ram. Install went well, as far as I know. No other problems. I fear, that unless I fix this, when I upgrade to a new computer, I will be taking the same problem with me.

So if you start Aperture do some stuff in it, quit, then open Aperture again it starts up OK but if you then quit Aperture, reboot your machine and start Aperture it stalls?
You're internal drive is getting close to being overfull your at about what 18.5% free space (some we'll say it's already overfull). You might what to think about freeing up space. If you weren't having any troubles I'd say it was fine but as you are experiencing problems it is something to look at.
While its been doing the processing have you been able to open the activity window in Aperture? If you click on the spinnig gear (not the beachball) when Aperture is busy you can usually get the activity window to open.
Other then that not sure what else to recommend at this point.

Does Boot Camp work with Fusion Drive

After having Boot Camp fail this morning while partitioning the drive, and now having to erase and restore my entire hard drive, 500GB worth of crap, I am wondering -- does Boot Camp work with the fusion drive? My new iMac has one of these things, and I am wondering if that is maybe the reason it did not work.
Thanks
Bob

mende1 wrote:
A virtual machine is less risky because it doesn't modify your hard disk. However, it gives you less performance because it doesn't use all the hardware of your computer.
While that is true the actual performance available depends on how much resources you have, and how much is made available to Windows. (Win 7 in BC on my iMac gets a 5.9, in a VM it gets a 4.8) all the reduction is in the graphics performance. Disk performance in the VM is faster. I have 16GB or Ram, the VM gets 8 of that when it is running.
If games are to played a VM is useless.

Does prem pro work with a nvidia gt630m graphics card

Does prem pro work with a nvidia gt630m graphics card, i have downloaded from creative cloud but when i try to start the progrm I get a message from windows7 that the program has stopped working and then close s down.
System is I7 processor, 8gb ram,and nvidia gt630m

How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10 and Win7
What is your driver version number?

I got a MS-7253 k9vgm with 4gb ram and W7253VMS.180 BIOS but I only can see 3GB

Hi,
I have a MS-7253 with 4gb ram recently installed on it but in bios memory check state it only shows 312something KB (3.2GB) and BIOS is the latest one.
According to MSI's site, this motherboard is supporting upto 4gb. I've turned off the on board vga as well and my vga card is an nvidia geforce 8400GM.
the funny part is windows 7 recognize the whole 4gb but it says I only can use 2.8gb of it.
whats wrong with my M/B? is there any other update which I'm not aware of?

Thanks for your reply,
does that mean there is no chance for upgrading ram to 4g? or by BIOS update I can do that?
I have found another BIOS update newer than what I've got from this link: https://forum-en.msi.com/index.php?topic=153338.0
just in case if I screw my BIOS can I revert it back to what it used to be?

Does creative cloud work with windows 8

does creative clould work with windows 8?. I see windows 7 as a minimum requirement with no mention of windows 8

lewis0,
Welcome to Adobe Community .
Minimum requirements means that you have to have these as the minimum configuration to install the Adobe Products . You can surely go ahead and install the product on a windows 8 PC and it should work fine.
Regards,
Kartikay Sharma

Does apple tv work with hdmi to VGA hd15 cable?

I have a Phillips tv and there is no hdmi to hdmi connection. But there is a VGA 15 input. Does apple tv work with it? I seem to be getting a black screen.

I tried hard. Four different manufacturers, including Belkin, none of HDMI to VGA works with rMBP. However, all of them work with other sources, like Dell notebook.
HDMI directly from rMBP to HDMI intput works fine.

Does apple tv work with ee router

does apple tv work with my ee smartbox router

Doubtful.
What allows for streaming content from an iPad to a television thru an Apple TV is Apple software included with iOS on the iPad and the Apple TV software. Unless there is a 3rd party android app that provides for this, no.

Does Apple TV work with ipads?

Does Apple TV work with ipads?

http://www.apple.com/airplay/
http://support.apple.com/kb/HT5209
 Cheers, Tom

Does apple tv work with both N wireless bands

Does apple tv work with both wireless "N" bands

Yes, I have both the 1G and 2G ATVs working off a 5 GHz n only network. Since the 2.4 GHz band can be set up to be backwards compatible with b/g networks it will work here too.
I use an Apple Time Capsule to create a dual band network. Running my ATVs and Airport Expresses on the 5 GHz band improved streaming and AirPlay speaker reliability substantially in my location. I suspected interference from my neighbor's networks as well as other 2.4 GHz sources. I had to create the 2.4 GHz network for my 1G touch and an older laptop to work which don't need as reliable of a network connection.

Does apple tv work with Hannspree tv's?

does apple tv work with Hannspree tv's?

Welcome to the Apple Community.
Never heard of them, but the Apple TV requires a TV with an HDMI connection that supports 720p input and is widescreen.

Does apple tv work with android tablets

Does apple tv work with android tablets.

Doubtful.
What allows for streaming content from an iPad to a television thru an Apple TV is Apple software included with iOS on the iPad and the Apple TV software. Unless there is a 3rd party android app that provides for this, no.

Does P965 Platinum work with 4GB Ram?

Similar Messages

Maybe you are looking for