Does Pages NEED a network connection?

I have chosen the option in Pages to not use iCloud, but every time I open Pages, the phone appears to be trying to access the network for some operation. Also, typing is slowed to a crawl, as if typing has to depend on network response time. What gives?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
                                                                I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

Similar Messages

  • I have the ipad2 with the latest Os upgrade.  On certain websites, I get the following error message: cannot open page. Safari cannot open the page because the network connection was lost. I have rebooted, turned off wifi and reset the password.

    This is happening to only certain websites.  Unfortunately, the work ones that I need to access.  I appreciate any help.
    Error message:
    Cannot open page
    Safari cannot open the page because the network connection was lost
    I reset the wifi and the password, I also rebooted several times.

    Do you have any other browsers on your iPad? If you don't have one, why don't you try downloading one of these free browsers - they will all be "lite" versions (not full featured)  - but if you can access these websites with one of those - then I assume that we can point to Safari as being the culprit. That will not solve the Safari problem, but it will give us another point from which to work.
    http://www.google.com/search?client=safari&rls=en&q=free+ipad+web+browsers&ie=UT F-8&oe=UTF-8
    I have Mercury, iCab Mobile, Opera, Dolphin and Atomic. iCab Mobile - the paid version is great.
    BTW ... have you tried to access these sites from another WiFi connection - like a library, a friend's house - any other WiFi network?

  • Once airport is setup, does it need to be connected via ethernet all the time?

    Once airport is setup, does it need to be connected to the router with an ethernet cable all the time?

    AirPort Setup....the configuration utility in Mountain Lion...will look at the connection and configure the Express accordingly.
    If you have an Ethernet cable connected during the setup, then you will need to leave the Ethernet cable connected after the setup.
    If you want the Express to connect using wireless only....then you must configure it using wireless only.

  • Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers

    Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers?

    I got an additional question bout this topic:
    is it possible to use both at the same time? in my case cable-connected speakers in the living-room and an Airplay-speaker in the bathroom and/or kitchen?
    so I select the Airport Express as Airplay-Output on my iPad and from there it's shared via cable AND wireless? this would solve the problem of being able to only select ONE Airplay-Output on my iPad at the same time...

  • "Hotspot login could not open the page because the network connection was lost"

    So, I've been trying to connect to the login for our school's wifi for a while now, but instead of like going into the sign in spot where you accept the terms of use agreement for our wifi, the pop up screen says "Hotspot loging could not open the page because the network connection was lost". This is on my iPod touch 2nd Generation, and I've never had this problem before, but it popped up like 4-5 weeks ago, and I haven't been able to log in since. Anybody else solve this problem/ have it and could give me advice on how to solve it? That would be great, thanks and see you fellow Applers later!!

    1. Double-click the Home button to reveal Task Bar at bottom
    2. Hold the Safari app down for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Re-launch the app and test
    Note: If necessary close all apps in the Task Bar

  • Hotspot login cannot open the page because the network connection was lost. Why?

    Everyttime I try to connect to the wifi, all I get is about a second of the phone saying it is connected, before I get a login page, with the web adress of "captive.apple.com".
    The login page is black, and after about a second I get the message,
    "Error Opening Page: Hotspot login cannot open the page because the network connection was lost"
    I've tried restarting the phone, resetting the network data, everytihng I can think of but no luck.
    How can I fix this?

    Good day everybody. I had the same issue and I got crazy but keep up work on it about 1 week to have the resolution.
    Here is the simple steps to overcome this problem:
    1. Choose your Wifi and get connected
    2. On Wifi page at the bottom Turn On 'Ask to Join Networks'
    3. Connect to your Wifi,
    4. After connecting, you will see a blue next to your selected Wifi
    5. Press the blue and get into the connection detail of your wifi
    6. Turn on Auto-Join
    7. Turn Off Auto-Login
    8. Close settings
    9. Go to Safari log with Hotel, Business wifi page
    Trick is the Auto-Login must be turned off

  • Getting "safari cannot open the page because the network connection was lost" on a popular UK electrical retailer when trying to click and collect, yet I have excellent 3G and WIFI connections

    When I try and use a click and collect service via a popular electrical retailers website in the UK I get " safari cannot open the page because the network connection was lost"
    I have a superb WIFI connection and have tried it via 3G.
    I am not getting this on other websites, however have recently updated Safari.
    Any ideas?

    Install Chrome and see if the problem lies with Safari...that's where it was with my mini.

  • Safari cannot open the page because the network connection was reset. the server may be busy

    So i connect to my wifi through settings and it shows me having 3 bars but when i open safari it says "safari cannot open the page because the network connection was reset" What is wrong and how do i fix it?

    1. Double-click the Home button to reveal Task Bar at bottom
    2. Hold the Safari app down for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Re-launch the app and test
    Note: If necessary close all apps in the Task Bar

  • Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

    does PI need a direct connection to third party or can work with a proxy server based connection to third party?

    Hi,
    It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
                                                                    I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
    Regards-
    Anuj Nogja

  • HT4759 If my iPhone is lost, does it need to be connected to a wifi in order for me to pinpoint its location?

    I need quick assistance, I lost my iPhone and I am trying to locate it with the app "find my iPhone"
    Does the phone needs to be connected to a wifi network for the app to work?

    yes Erik, the phone needs to be connected to wifi/data to locate it, hope whoever find it is dumb enough and connect it to wifi, keep an eye on it, good luck.

  • Ethernet? Does TC need to be connected to the internet?

    Not sure what the story is there. I just need TC as an external hard drive. Don't care about connecting it to the web. Do I have to connect it to my modem anyway via ethernet cable? Is that the only way my mac will see it wirelessly?
    Firewire is looking good right now, I've wasted 4 hours trying to set up TC and it's still not working. It did start backing up, then stopped half-way and never resumed. I think I will need to erase the TC disk and start again (if I find a way to do this). Looks like another piece of c@ap that just doesn't work.

    I have TC setup wirelessly on my network. I am using an Airport Extreme Base Station as my router and the TC for backup. The setup was straight forward as I did not use the manual method (tried it first and had problems). Once configured, everything worked well with the backups except that the TC keeps loosing its network connection. Only way to fix is to unplug/plug power cord.
    Hope Aple fixes this soon!!

  • Does TC need to be connected to the internet to backup to?

    I have a network of 3 airport extremes but I would like the TC to not be assessable by the network. Just wifi backups...

    TimeCapsule does not require an internet connection to backup computers which are joined to it's wireless network.

  • Why does compressor need to be connected to internet to work?

    I am using an 8 core macpro with 10.5.2 installed and final cut pro 6.0.3
    when I put a job in compressor and try to submit the job, compressor says it has an unknown time remaining , and nothing ever gets done. That is because I have blocked the out going connection to a couple of ports that my firewall was telling me compressor tried to connect to the internet when I submitted this job.
    If I do NOT allow compressor to connect to the internet, I can NOT use it.
    After I allow compressor to connect to these weird ports, only then can compressor work.
    DId compressor get infected with a virus or something? Why do I need an internet connection to use compressor?

    its since I updated to final cut 6.0.3
    This problem is not unique to just me, a search for "compressor unknown time remaining" in google shows alot of people with this issue
    http://www.google.com/search?client=safari&rls=en-us&q=compressorunknown+timeremaining&ie=UTF-8&oe=UTF-8
    sadly, I have yet to find a solution other then it working on 6.0 and 6.02
    please do not say its user error when I have tried all the so called workarounds and none have work.
    it works when I let it connected to the ports it connects to, if I do not let it connect to the ports, it doesnt work
    Message was edited by: piff aroni

  • Does MBP need to be connected to internet at initial setup?

    Will it cause trouble to set up the internet connection later?
    macbook pro 2.16GHz   Mac OS X (10.4.6)  

    You don't need to be connected for the initial setup. The registration can be sent later.
    MacBook Pro 2.16   Mac OS X (10.4.6)   100GB 5400rpm, 1GB RAM

  • "Safari cannot open the page because the network connection was lost"

    I can't not access most of website by my cellular data, why? I still can receive or send on imessage, still can check my facebook but no instagram. What's wrong with my phone 5?
    I tried to reset my network connection but it didn't work

    Tap Settings > Safari
    Tap to clear cookies, history, and data
    Then restart the device.
    If that didn't help, reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings

Maybe you are looking for

  • How to open and view a demonstration file of MS Power Point 2010 on iPad 2?

    Hello! I've made a MS Power Point file for my boss, he is using an iPad 2 (iOS 4) But he can only open a static picture of the presentation, but he can't view the presentation step by step as it should be. Which app or feature should he use to see fu

  • Why can't I do cumulative edits, like in iPhoto 6?

    I've just bought a new iMac (Core i5) running the latest iPhoto (9). It has some useful improvements over iPhoto 6 which was the previous version I used, but one thing has gone - I can't do cumulative edits any more. In v6, I could sharpen a soft pic

  • JMS queue dynamic configuration

    I am trying to make a scenario, where we need to send a message to 4 different mq queues depending on a field value in the message. I am using the adapter specific parameter DCJMSReplyTo - the value of this parameter is set in a user defined function

  • Windows Transparent Key, Through the Window?

    Dear, Fellow-Coders I recently noticed if I try the transparent key and set it for example, pink and I have a pink background for my picture box.. And a image inside that box. Sure enough the pink is transparent, but instead of going to the image ben

  • HT1414 apps are gone on my iphone 5!

    i recently got the new iphone 5.  I had backed up my iphone 4 before restoring the iphone 5 as my phone.  everything synced up, but all my apps (aside from the apple apps) are gone.  how do i fix this?