Does Parallels Deskt 9 do changes to the bootcamp grafikcard driver (AMD Catalyst)

I´m running maverricks and bootcamp with win 7. on bootcamp. im using bootcamp 5 drivers except the grafikcard - latest AMD catalyst driver.
if i install parllel desktop 9 in order just for working with ms office, are there any changes wenn i boot from the bootcamp partition to play games? Will the AMD catalyst driver be changed or will it be the same way as before. i ask because paralles wants to install parallels tools (drivers).?
If there will be any change in my bootcamp installation i will not do it because bootcamp just works very fine.
sorry for my bad english.
best regards and thank for helping
Ekomax1

Youre right the drivers are untouched and nothing changed under bootcamp, but catalyst control center had to be unstalled because it produces an error message under parallels. its a little bit anoying because the control center is usefull for settings under bootcamp.
is there a workaround to deaktivate control center wenn using parallels?
best regards and thank you
Ekomax1

Similar Messages

Does Adobe plan to submit changes to the WebKit project?

Yes. Our goal is to become an active member of the WebKit community and submit fixes and changes to the WebKit project for consideration. Currently our changes are made available on the WebKit section of the Adobe Open Source website.

Pretty sure that's just wishful thinking. Microsoft doesn't even trust Microsoft, so to speak. Ever turn User Account Controls to the highest setting and then run Windows Update? Windows tries to warn about updates from their own site, through their own updater (IE), which is the ONLY way to access or run the updates.
Until Microsoft can ELIMINATE the possibility of bieng spoofed, and until we one day live in a virus free world, trust will always be an issue. Be it Adobe, or Roxio, or Mozilla, or....

Why does Itunes sync my purchase transfers to the wrong hard drive?

I'm running windows 7 with a 64gb SSD boot drive and 1tb data drive. My boot drive is almost completely full. I installed itunes on my data drive and set the preferences to sync media to the data drive as well. I plug in my old ipod to tranfer purchases before an update. The tranfer never finished because it synced all of the data to my boot drive and now my boot drive is completely full and the data is nowhere to be found. I recently had the same problem with it syncing an iphone backup to the same drive, but I found a work around for that. Why does Itunes instist on loading stuff on the boot drive? How can I redirect it? This is simple preferences that should be available to change, but simply aren't.

Your phone connected, iTunes running, under the Music tap, make sure there are no checks in the boxes labeled "Entire Music Library", & "Automatically fill free space with songs":

Can't access the Time Capsule Drive and attached USB drive

I bought the 3 TB Time capsule a couple of months ago. I am using it as my wireless router for a cable modem and have attached a USB drive (seagate) to the TC. I use the TC drive for time machine only. It worked well at first, for about the first month. Now I have trouble accessing the TC drive as well as the USB drive. The router function works perfectly fine. The drives show up in the Finder under Shared but cannot connect. Time machine does not back up because it says the back up drive is not available. In disc utility, the base station shows with the correct name, but I can't access it. It asks for a pasword but does not respond, so I cannot reboot it from my computer.
If I restart the TC (power off and on), it works fine, I can access both drives. However, this problem recurs, sometimes within a few days. I have also noticed, which may be related, that when I enter time machine (when everything is working fine), some of the back-ups are blank. There is a date and time but no actual back-up. Not sure if this is related.
I'm runing Mavericks 10.9.2 on an older MacBook, 15" late 2008 with 2.4 ghz dual core.

Hi Bob,
I updated Mavericks but still had the same problem, so I did a hard reset on TC, although I held the button for over 5 seconds and the amber light was flashing rapidly, it acted like a soft reset. Still no change so I rebooted my laptop. Still had an excellent internet connection but in AirPort utility, the TC is grayed out and says device not found. Light on TC was amber. So, I tried a hard reset again, but the light wouldn't flash at all. Unplugged it and after pluggin back in, acted like a hard reset. I restored previous settings and it is fine for the moment. Will keep you posted if it recurs. Hopefully it will not with updated Mavericks, but I get the feeling the problem may be the TC.

How can I remove the BootCamp partition? as the size i created ws too small to install MS Office on 64Bit Windows 8.1 on MacBook Pro (Aug'13)

How can I remove the BootCamp partition drive for Windows 8.1, as the size which I created was too small for me to install Microsoft Office onto Windows 8.1 64-BIt. The machine which I have is the MacBook Pro 13' inch purchased in August 2013.

Either use Paragon's CampTuneX to resize it or use Boot Camp Assistant to remove the partition and restore the drive to one partition. Then create a new, larger Boot Camp partition. This will remove/delete/erase your Windows system.

How can I increase the size of the bootcamp partition without having to delete or re-install windows? using a macbook pro (15-inch) 10.9.4.

I'm using a macbook pro (late 2013 with mavericks-10.9.4 ). I installed windows using bootcamp but didn't estimate the storage I required correctly. So now I don't have enough storage in the bootcamp hard drive.
How can I increase the Partition size between windows and mac without having to delete or re-install windows?
Thanks,
Advek

Check out this explanation.

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the my new iPhone number is OS. Any ideas?

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS. Any ideas?
<Personal Information Edited by Host>

Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iPhone and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your phone).

My photos are not showing up as layers in the layers panel, only as one layer, so I can't make any changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong?

My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.

barba87623950 a écrit:
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
Photos from cameras or scans have only one layer (the 'background' layer).
You can start with that 'background' layer and duplicate it or add other layers in the editing process. For instance you can make a selection of a subject and put it on another layer; a common use is to desaturate the 'background' and to keep the color in the selected subject in your newly created layer.

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Error while doing change in the PO

Hi Gurus,
When we are doing any change in the po after release of the Po at that time we get below error "Release outside filed of responsibility".
Please provide me the solution for the same.
Regards,
Anant

Hi
Got the error message "Release outside field of responsibility," it means you tried to approve a line item you are not authorized to approve.
\kindly checlk the authorisation for the same
Regards
Damu

HT4356 I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office?

I have two printers on my network. Does anyone know how to change the printer nomenclature - Officejet Pro 8600 (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?

You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

I just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial

just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial. Basically nothing saves and it was all screwed up when I first got it.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

Does Parallels Deskt 9 do changes to the bootcamp grafikcard driver (AMD Catalyst)

Similar Messages

Maybe you are looking for