Does PCI6534 have issues with power on io's and host cpu not powered

Are there any issues with the PCI6534 when the io has power applied and one boots the host CPU?

Hello;
I couldn't understand exactly what you meant by that.
I'm assuming you are asking if you will damage the board in case the I/Os are active and the CPU is turned off. If that is the question, the answer is no, you won't damage the DAQ device.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Similar Messages

Does anyone have issues with start up time

does anyone have issues with start up time

Have you tried a reset?
Press & hold both Home & Power until you see the Apple logo.
If that doesn't fix it, restore it as new and see if that fixes it.

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Only concrete way is to use it less sorry see here every method possible has been tried
https://discussions.apple.com/thread/4329696?start=2970&tstart=0

Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

Photo Stream only handles images and your videos are not uploaded or shared with other devices.
Use iPhoto to import from your device. It can bring in the videos and image files.

Does Safari have issues with Java?

When I log into my IG Index financial spread betting account safari usually quits unexpectedly immediately after the dealing screen has loaded. This is causing me huge frustration. The site relys a lot on Java. I believe there were issue with Java in Mac OS 10.3.9 that may still exist on 10.4.X
Any ideas?

Do you have the latest versions of Java installed?
Have you enabled Java in Safari's preferences?

Hi, does anyone have issues with the Camera app uploading photos to the photo album? This happens after I downloaded iOS8.1.2

I have just updated my iPhone iOS to 8.1.2. Since then, the camera is not able to upload photos to the album immediately and some are even lost. Does anyone have the same issue or know how to fix this?

I found it much easier to have my apps on the last page and let the pre-loaded apps stay where they are on the first couple of pages. While I'd prefer to have my apps first, at least they are all together. I found it far too much work to try to move them around another way, plus it shifts some things around in a way that I did not intend.
BTW, I definitely prefer the Fascinate's arrangement of the icons over the Droid X2, which is always in alphabetical order in a vertical non-stop continuum.

Does anyone have issues with the instrument library?

I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?

Just loaded the 6.0.2 update a few days ago. I was hoping it would fix the dropping of wifi where the 4g and 3g always kept. I have restored the router and I have even switched towers through AT&T's help, but to no avail. I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again. I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as being in my home most of the time. I am planning to take into AT& T store for a new one, just not happy with the wifi situation. It is sad that this cannot be fixed with an update. I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those. I hope At&T and Apple are reading these dialogs. Please let me know if fixes are on the way!

Does anybody have issues with the weather?

My phones weather app says the sun rises at 1am and sets around noon when clearly it's still night time at 1am and the sun is out at noon...***??!?!

Hei thanks about the messages. I didn't know about dellfand. I would try if only the system would still be broken.
somehow it has happened again the same thing that happened the last time (I hope - give me a couple of days to verify the system is stably ok)
I installed i8kutils and i8kmon, played a bit with the i8kmon.conf settings and then out of desperation removed i8kmon, removed i8kmon from the daemons in rc.conf but left i8k in the modules in rc.conf. Somehow now the fans do not behave like before... they still fan very conservatively (almost at full speed with temperatures of 50 degrees) but it is immeasurably better than the alternating madness I had before.
I'll keep you updated
P.S. regarding the bios it might be because I have refreshed the bios with the latest version just after I bought it. Looking at the version number it was quite an update...
Cippa

Does any one else have issues with Safari 5.0.6 and memory usage and bug reports?

Hey Everyone
I have an iMac 7,1 desktop and for year it had gotten me through a lot. I have noticed in the past year My iMac has been slower than usual and I have doen what I can to speed it up. The main issue is Safari 5.0.6 becuase it's using 50% of my memory(4gb) and now it doesn't report any bugs to apple.
Can any one help explain this?

Flash has nothing to do with your download speed nor wireless. It's just a Internet plug-in (and preference pane). You are using an old version. Flash's current "stable" version is 11.1.102.55 and beta 11.2.202.197. You can get the stable version from Adobe by going through here. You can get that or the beta by going through macupdate.com.

Does anyone have issues with Windows 7 and Acrobat 8 Pro

I am using Windows 7 and Acrobat 8 Professional. I have 3 installs that work great but 1 that keeps getting a flashing box the size of a popup and then the entire machine freezes up and requires a reboot to work at all. The flashing box is so fast, I cannot read and data on it and as no other programs or software will function at the crash, I am not sure how to troubleshoot. I did a repair, no help. I uninstalled and reinstalled but again, no help......Any tips would be appreciated... Thanks all,

You should be able to move the problem plugin from the plugin folder of Acrobat to a temporary folder and see how it runs. You also did not indicate if it was a 64 bit version of Win7. If the latter, be sure to update Acrobat (should do that anyway). Several folks have been successful with Win7 X32, but I am not sure about X64. Often the updates will fix most of the problems and are even recommended in XP.

Does anyone have issues with iOS 5.1.1?

My iPod Touch 4G is running (I say running, It's actually imitating a slug on sleeping pills) iOS 5.1.1. It normally crashes (Goes into recovery mode) about once a week. For an example, when I wake up, I check the time; and it won't even open when I press the home or sleep buttons. Then it will kick into the much-loved pre-crash loading screen. Sometimes it will snap out of it's trance, other times, I will let it sit for a half-hour or so, and when I come back, I find myself staring at the iTunes logo in rage -_- So I'm wondering if this is a known problem with 5.1.1, or If I recieved a device with a bad OS or hardware.

I personally have an iPod Touch running on iOS 5.1.1 and have no such problems. However, I do notice my iPod is running slower, and will freeze, though it's rare, maybe once a month or so.
May I suggest formatting your iPod?

Since downloading Firefox on a new Windows 8 PC I have issues with adds imbedded in websites and IE10 shutting down & not working properly.

Downloaded Firefox since several websites we use are not yet fully compatible with IE10. Since downloading IE10 will register a problem as soon as opened, shut down, then reopen to same page. Also have adds embedded in websites like Facebook that were not there previously, as well as popups from Firefox (Deal Caddy???) that I can't figure out how to disable. Also noticed that the two-finger scrolling in Windows 8 (when using IE10) no longer works correctly. These issues only exist for one of two users on this computer. The user that did not install Firefox does not have the above issues.

In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]]

Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

Hi Guys and Gals.
Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
Regards,
Jase

Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not. They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job. I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
Two and a bit years is a long time in tech terms.
Stephen
eni wrote:
I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1 I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders. I've used Sony tape based camcorders in the past. I'm looking for High Definition. I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible. I would like to download directly from the camera to FCE. I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia? And if not, but you really like another camcorder that you can recommend, what is it?

The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
One note, however, the Vixia HF M52 supports a number of different shooting modes. I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE. FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

Does anyone else have issues with charging the 4? Both my daughter and I are experiencing issues.

Does anyone else have issues with charging the 4? Both my daughter and I are experiencing issues.

HLDkro wrote:
our original ones got frayed and no longer work. Been buying USB charges from my local pharmacy.. Need a new one every 2-3 weeks. I went to Verizon and bought a compatable one and right now I have my phone balanced on the garbage can with the cord strategically placed for it to charge. The USB does not work pluged into a wall, however, the same cord does work in my car.
" I have my phone balanced on the garbage can with the cord strategically placed for it to charge."
Makes it sound like the charging port is damaged or loose.

Does PCI6534 have issues with power on io's and host cpu not powered

Similar Messages

Maybe you are looking for