Does PE10 install as a 32-bit or 64-bit application on Windows 8 64 bit?

Premiere Elements 10 was released as a 64 bit application only when on Windows 7 64 bit. For all other operating systems, it was still a 32 bit application running in the 32 bit compatibility mode of a 64 bit system.
For me, that poses an interesting question about Premiere Elements 10 and how it was set up to recognize one operating system from another. I am still with Premiere Elements 10 on Windows 7 64 bit. So I ask, if I install Premiere Elements 10 on Windows 8 64 bit, will Premiere Elements 10 be a 32 or 64 bit application?
Has anyone one been there and done that and found the answer?
Thanks.
ATR

tjmx
This thread was not directed to an Adobe issue, but rather as a fact finding mission regarding the possibiity to install Premere Elements 10 on Windows 8 64 bit. I am still working with Windows 7 64 bit and, unless forced to for some reason, will not be going to Windows 8 64 bit in the near future. Your post #10 of this thread directed to my attention motivated me to check your prior posts to get more information on your Adobe product issue to which you were referring.
The first one that I found was
http://forums.adobe.com/message/4807792#4807792
Keep in mind that I am not affiliated with Adobe nor Sony in any way nor have any insider information on their products. My information is almost entirely based on hands on exploration and experimentation of the product. And, when my information is from something that I have read, I try to make the distinction between hands on and "from what I have read".
After reading your thread cited above, it would appear that the issue does not go to Adobe, but rather to Sony and its pre-installed Premiere Elements products. Premiere Elements 10 Windows should be compatible with Windows 8 64 bit, provided you have the proper installation tool given to you. Clearly, Sony does not design to that end for its pre-install Premiere Elements. From what I have read, you should run into problems even in the same operating system if you uninstalled the pre-installed Premiere Elements 10 since Sony is not going to supply you with installation files nor discs for this. Am I correct in this?
The spin of the message from Sony (shown in your prior thread referenced above) would suggest that you are dealing with a Premiere Elements 10/computer operating system compatibility issue. As I just mentioned in the previous paragraph of this post, you should be running into problems even in the same operating system if you uninstalled the pre-installed Premiere Elements 10 and then wanted to reinstall it.
Have you read the fine print in the Sony Vaio purchase with regard to pre-installed Premiere Elements 10? If not, see if you can find anything in it that defines your rights as to obtaining installation means for the pre-installed that has to be uninstalled and then reinstalled for whatever reason, troubleshooting or upgrading of the operating system. This is an old story of Sony Vaio and pre-installed Premiere Elements.
ATR

Similar Messages

How does one install the libflashplayer.so so it will allow an ubuntu 64 bit proc to run flash player?

I am attempting to update my flashplayer on my ubuntu firefox install, when I go to download the update it tells me that I can try the 10.2 beta as they do not have a 10.1 version that will support the 64 bit archetecture. I have unpacked the file to the usr/lib64/firefox-addons/plugins folder, but for some reason firefox will not accept that a newer version has been installed.

am running on X86_64 OS..copying 'libflashplayer.so' into /usr/lib/mozilla/plugins has no effect..i had to move that file into /usr/lib64/mozilla/plugins/ ..then after restarting firefox everything runs smoothly

Viewer Builder update does not install

The Viewer Builder update (Viewer-Builder-1.7.0-RC.dmg) does not install. After downloading and removing Viewer Builder from the Applications folder, this update does not install.
Steps:
- Removed Viewer Builder app from Applications folder
- Download update from Adobe Site
- Click to install
- Opens package and performed some kind of install activity. There are no prompts and quickly finishes
- No Viewer Builder installed.
Any insights on to this would definitely help.
Adobe DPS on MacOS Lion

upgrade folio builder tools does not work..
this morning I tried to update the folio builder tools, from out of indesign cs5.5 on a windows PC..tried 5 times...still get the update message in the folio builder panel in Indesign.
this afternoon I tried the same on a completely different windows machine...same result...the thing does not work, no upgrade gets installed, I tried 20 times, even also the other tool....????????
2 days ago, I tried it on an other machine and it worked fine....
regards..Anne

HT2305 I have Widows 8 but my Itunes wont open I keep getting a message "Itunes software does not install on 64 bit operating system"

I have a Widows 8 laptop. I cant open Itunes. I get a message "Itunes software does not install on 64 bit operating system" Can anyone tell me how to get it installed?

If you are referring to Vista Support, It may be after the new year before it fully supports vista. I have not upgraded to vista yet but I was thinking about it!

Does SL install as 32 or 64 Bit by default and does it matter?

Does SL install as 32 or 64 Bit by default and does it matter?
How can I boot SL to 64 bit if needed?

What is the installed CPU?
If it is the AMD E1-2100 as stated in the product specifications, then it is a 64-bit CPU. It is capable of Virtalization and will run a 64-bit operating system.
All of the required drivers for Windows 8.1 are here on the HP web support portal for your notebook. There are no available drivers for other Windows operating systems.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

NVIDIA driver 6md647ww does not install on W701 with Windows 7 64 Bit

Hello,
I have downloaded the nvidia driver 6md647ww (311.00), 64 bit version, and can't install on a Windows 7 64-bit system. It says "no compatible device found". The strange thing is, although the decompression routine and the window asking to start installation both say that they are the 64 bit version, the text besides the check mark "install the driver now" says it will install the 32 bit version (after decompressing the window says 64 bit in the upper part, but 32 bit in the lower part).
So I guess there is an error in the installation routine which erronously wants to install the 32 bit version although it is DEFINITELY the 64 bit version I have downloaded. Also, I downloaded for testing the 32 bit version of the driver (5md647ww), and if I try to install that, I get exactly the same error as with the 64 bit version.
Could someone please look into the 6md647ww, there is something wrong with it. Also, I can install 6md640ww and 6md643ww without any problems and switch between these two versions without any error - the 6md647ww issue is definitely NOT a problem of my OS configuration.
I have a sporadic heavy crash issue with 6md643ww and need to upgrade badly.
Please help. Best regards, Michael
System: Lenovo W701, 16 GB Ram, Windows 7 64 Bit, NVIDIA Quadro FX 3800M

In the meanwhile Rev 04 of the driver was published. This version is binary different to Rev 03 and - surprise - it now says correctly after unpacking it will install the 64-bit version. But after that same problem as before, "no compatible device found".
I did some searching into the files of 6md647ww. I guess the file Display.Driver\NVLT.inf contains a list of compatible devices - in this file the sections labelled NVIDIA_SetA_Devices.NTamd64.* list a lot of device-ids, for example PCI\VEN_10DE&DEV_0A3C&SUBSYS_214517AA and many more. The device id of the graphics card for a system can be found in the hardware/device manager of windows, I obtained that for my card and this id doesn't show anywhere in NVLT.inf. So if my guess is correct, it is no wonder the installer says "no compatible device" since the device id of my card is not listed in NVLT.inf.
Please note again that all previous versions of lenovo drivers for my NVIDIA Quadro FX 3800M did and do install without absolutely any problem!
This is strange, readme of the current driver version definitely says NVIDIA Quadro FX 3800M is supported by this driver, but the driver doesn't seem to contain the device id for it. Looks almost like the wrong driver was used / bundled into 6md647ww.
And again the question to the board / administrators if lenovo technical support is reading here and is there another contact at lenovo where I could direct my problem to? I am still having the sporadic heavy crash issue which is very dangerous since it can happen any time if displaying whatever graphics in whatever software and which therefore has a high risk of data loss. Also, installing the plain NVIDIA driver directly in the current version still has the problem of flickering and color errors, so this isn't a solution either.
Best regards, Michael

Does anyone install a 64-bit weblogic on 64-bit archlinux

i want to install a weblogic on my archlinux(64-bit),but i can only find 32-bit version on the oracle.com,i wonder is there 64-bit weblogic exist,and where can i download it, thanks for help
Last edited by vincent (2009-04-19 09:17:10)

Go here: http://www.oracle.com/technetwork/middl … 97127.html
And look at the note: To use WebLogic Server with 64-bit JVM's on Linux and Solaris or to use WLS on other supported
platforms, use the WebLogic Server generic installer listed under "Additional Platforms". The generic ....

Why does the iTunes 64 installer install into the Program Files (x86) directory and run in 32 bit mode?

I have just installed this and even tried to manually get it to install in the "Program Files" directory. Programs installed into the "Program Files (x86)" directories are 32 bit apps. This is where the iTunes64Setup file installs to. Is this intended? If so, why call it iTunes 64 bit ? It is compatible in this mode, but iTunes actually running in 64 bit mode could drastically improve performance and processing of large libraries.
Please advise if this is a known issue or if iTunes 64 bit even exists.

The 64-bit version of iTunes is a mixture of 64-bit and 32-bit componentry. You'll also notice on your PC that some of the componentry for iTunes itself is installing in the iTunes folder in the Program files directory (such as the miniplayer). The GEAR drivers used for burning and importing are 64-bit. The iPod service is 64-bit. AMDS is 64-bit. Bonjour is partially 64-bit.
It's normal to see the itunes.exe process running as 32-bit on a 64-bit system.

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

Does anyone know if Appleworks 6.2(education version) will run on windows 7 64 bit? I have it running on 32 bit with no problem.

Does anyone know if Appleworks 6.2 (education version)will run on windows 7 64 bit? I have it running on 32 bit with no problem.

It runs fine on 64 bit. I have it running on Windows 8 Pro 64 bit. Just have Quicktime installed first otherwise the install will fail. Sorry for the late reply.

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks. You might want to do a search on that topic and see if anyone has a solution. There have been various versions of the problem but a lot related to errors in the download package or failure to download.

Elements Organizer 9 does not install with PS Elements

I have installed Photoshop Elements Version 9 on a Windows 7 64 bit system. Photoshop Elements installs and works good... but the Organizer does not install and of course will not load either. I have uninstalled installed and reinstalled several times... still no luck.
I can tell it is not installed because when I look in the Program Files (x86) under Adobe... the Photoshop Elements 9 folder is there but the Elements Organizer 9 is not there.
How can I get organizer installed?
Thanks...
Rod

Follow the below link, remove all the entries for PSE 9 from the machine and then try to install again. This time the organizer should get installed.
http://kb2.adobe.com/cps/859/cpsid_85966.html
Regards,
Ankush

When I connect my phone iTunes tells me that I need to uninstall and reinstall a 64-bit version. I have the 64-bit version installed. Help

I have been fighting with iTunes for the past few days. My wife deleted a file by "accident" and I have been working to get iTunes to work ever since. I have worked through numerous issues and managed to work through them all, but have now hit one that I can't and that I can't find a solution elsewhere. I have done the complete uninstall (complete meaning, very complete) and reinstall of the 64-bit version of iTunes several times now. The software works fine until I plug in my old iPhone (4). When I do, the software popps up with a message that says that I have the wrong version of iTunes and need to uninstall my current program and reinstall the 64-bit version. Anyone else out there had this happen and if so, what did you do???

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

My Windows 7 Ultimate {32bit} does not install driver for my LG HDD HXD5 320GB

My windows 7 does not install driver for my LG EXTERNAL HDD HXD5 320GB & its attached using a USB.
It works perfectly on Other computers having Windows 7 & Windows XP & Windows Vista, just doesn't work on mines.
I have had internet connected when it was installing hence it got the opportunity to search Windows Update for it but it fails :(
It works even on my computer ( I have DUAL OS) on windows XP SP3 but i need it to work in Windows 7.
Please help Thanks :)
& i have already tried tried the solution which was proposed for another topic in this forum on which it was to Uninstall the driver using Device Manager and unplug the HDD and attach again and let the computer detect and install it again, my computer
does detect it but fails to install the drivers.
My Computer has a 2GB of RAM & 2.40GHZ (32bit) with an Intel Core 2 Duo Processor and had come with Windows Vista Home Premium 32bit installed, & i upgraded to Windows 7 Ultimate 32 Bit which is completely updated to all the Updates that Microsoft
had offered (using the built in Windows Update in Control Panel)
I have got screen shots of it too.
http://shumayal.fileave.com/HDD.zip
PS: Same is the case with some of my USB Flash drives, but in their case they don't get detected at all but get in Windows XP SP3 (which is another OS on my pc) as well as on windows 7 and other OS on OTHER COMPUTERS but not mines in Windows 7.
Thanks :)

Hi,
I recommend you try to update the BIOS and the motherboard chipset drivers for Windows 7 firstly.
After that, please refresh the USB Stack:
Control Panel – Device Manager – USB Serial Controllers – Right Click on EVERYTHING and UNINSTALL all except the category itself – Reboot
. This refreshes the drive and the USB stack
Then, right click on the LG EXTERNAL HDD HXD 5 320GB in Device Manager and select Update Driver Software.
You may also try the Windows 7 built-in
Hardware and Devices troubleshooter.
Hope it can help you!
Best Regards,
Miya Yao
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread.

Does PE10 install as a 32-bit or 64-bit application on Windows 8 64 bit?

Similar Messages

Maybe you are looking for