Does photoshop elements work with air display from avatron?

I want to use photoshop elements with air display from avatron.  Its necessary use pressure sensitive.

Photoshop Elements only specifically works with touchscreens when it comes to gestures (moving your finger(s) in a specific motion to get a special behavior). Otherwise, the touch screen should act exactly like a mouse. My guess here is that this is simply a question of precision. If you try to "click" and drag a corner of the crop interface, does the crop rectangle move or rotate instead of change size?

Similar Messages

  • Does Photoshop Elements work with Windows 8 Touchscreen

    Hi I'm able t use parts of the touchscreen for example, selecting a tool. But, when I try to say use the crop tool I cannot use my finger to expand or contract the crop tool.

    Photoshop Elements only specifically works with touchscreens when it comes to gestures (moving your finger(s) in a specific motion to get a special behavior). Otherwise, the touch screen should act exactly like a mouse. My guess here is that this is simply a question of precision. If you try to "click" and drag a corner of the crop interface, does the crop rectangle move or rotate instead of change size?

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Will photoshop elements work with Encore or do I have to have the full Photoshop

    hi there,
    I'm using Premier Pro and Encore Cs5.5. I do not create fancy menu's. At the most, I put a photo or two on a background of color and some text.
    My work is on my Mac.   I have photoshop elements on a windows PC in another room. I've been going between the two machines using photoshop elements on the PC to create the menu's and then sending them over to the mac for Encore use.  Obviously, this is not optimal and I expect the PC to die any day now. Therefore, I thought I would buy Photoshop ELements for my Mac.
    So, my question is "will photoshop elements" work ok on my Mac with Encore? Or, do I have to get the full blown Photoshop ? Advice?
    thanks everyone !

    For what you are doing, PSElements for Mac, should be fine.
    Unless it has changed recently, when working with Menus in PSE, was the inability to CREATE a Button Layer Set. You can edit them, just not create one. If you are just modifying the Library Menus, and Buttons, there should not be an issue
    Now, I believe that you will still not have the full functionality of Encore and PS, where you have the option to "Edit in Photoshop," right from Encore. What this does is create a TMP file, for the Menu, that is linked back to Encore, then launches PS, and Opens that linked TMP in PS, and when editing is done, one only has to Save in PS, and those changes follow the link back to update the Menu in En. You will have a slightly different workflow, where you would launch PSE, Open the Menu and edit it, then I would do a Save_As, so as to not overwrite the original, then in En, Delete that original, and Import the Save_As file as a Menu, and use that. It would be easiest to do all of the Menu editing in PSE first, then Import those as Menus into En, and just use them, as you would a Library Menu. Remember, you need to start off with a Menu, so that you have the Button Layer Sets, as you cannot create those. A bit different workflow, and not quite as convenient as Edit in Photoshop. As I do not have PSElements to test with, check me out that Encore will not link up to PSE and offer "Edit in Photoshop Elements," but it is my understanding that it will not. I just cannot verify. Also, check the latest version of PSE (you should be able to do this on the PC, while it runs) can now create the Buttons' Layer Sets. PSE 8 could not, and I do not believe that that function has been added to PSE 9.
    Good luck, and with those exceptions, PSE 9 for the Mac should be just fine. You might want to wait a month, or so, as PSE 10 and PrE 10 should be released around the end of Sept., or the beginning of Oct., if history holds true. Do not know what will be in PSE 10, but maybe Layer Set creation?
    Hunt

  • FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?

    What is a raw file?
      A raw file is the unprocessed light data that was captured by your camera sensor. The only settings on your camera that apply to this file are aperture, shutter speed, and ISO. This means that any settings you may have applied to the file, such as white balance, or black and white effects, have no effect. Because this sensor data is raw, it must be processed or baked into an actual image file, that's where the Adobe Camera Raw (ACR) plug-in comes in.
    What is Adobe Camera Raw?
      ACR interprets the raw data and makes image information out of it. But every camera has a unique sensor and thus has a unique form of raw file. Even though camera manufactures may use the same file extension each time (e.g. Nikon raw files are always .NEF), each camera model has a different way of storing information. Because of this, we must continually update ACR for new cameras. As we add new cameras to the list (over 300 now) we update our published list of supported cameras. Additionally, with the changes to ACR, newer releases will not always be compatible with older versions of Photoshop Elements.
    So, will the my raw files work with Photoshop Elements?
      So if you are wondering if your camera is supported by ACR or will work in Photoshop Elements, first check this list:
    Camera Raw plug-in | Supported cameras
      Once you know whether your camera is supported by ACR and by which version, check this list to see whether your version of Photoshop Elements supports that version of ACR or later:
    Camera Raw-compatible Adobe applications
      If your version of Photoshop Elements should open raw files from your camera, make sure you have the latest version of ACR installed. Go to Help > Updates to install the latest ACR release.
      You can also manually download and install ACR updates:
    Macintosh
    Windows
    What if my camera is not compatible with my version of Photoshop Elements?
    Supposing you have a camera that came out after the release of a newer version of Photoshop Elements, so that your version of Elements is no longer recieving updates, you have two basic options:
    Purchase the latest version of Photoshop Elements that supports your camera.
    Use the latest version of the free DNG Converter (for Macintosh or Windows)
    You can convert your files to the universaly compatible DNG format (the files will work with any version of the Camera Raw plug-in). See In depth : Digital Negative (DNG) for more information.
    Where are all of the tools and options that I've seen available in tutorial books and videos?
    Photoshop Elements has fewer tools and options than it's parent Photoshop. These differences are documented here:
    Adobe Camera Raw differences between Photoshop and Photoshop Elements
    Additional resources
      For more inforamtion on Adobe Camera Raw, please check these links:
    Troubleshoot Camera Raw
    Why doesn’t my version of Photoshop or Lightroom support my camera?
    In depth: Camera Raw
    Julieanne Kost's Camera Raw video tutorials
    Adobe Camera Raw turns 10

    Hi Joshua ,
    I would like to know few things before I assist you any further.
    Which version of Android are you using?
    What kind of PDF file it is?
    Try uninstalling the app once and they try to reinstall .
    See what happens.
    Regards
    Sukrit Dhingra

  • Which version of photoshop elements works with yosemite

    which version of photoshop elements works best with Yosemite, PSE 13?

    Actually versions pse 6 through pse 13 work on mac os x 10.10 Yosemite, but pse 12 and pse 13 might work better, since they are 64 bit applications and can use a lot more ram than pse 6 through pse 11, which are 32 bit applications and only use a limited amount of ram somewhere around 3 gbs of ram max.
    You might as well get pse 13, since it's the current version adobe sells.

  • Photoshop Elements 11 with retina display?

    I just ordered Photoshop Elements 11 for my new Macbook Pro with retina display, but based on the discussion here, I am worried that it might not work correctly. Does anyone know if Elements 11 supports retina display? Thanks!

    PSE11 is not optimized for retina display but it runs very well on the latest Mac Book Pro with fantastic clarity. As far as I know, only Photoshop CS6 and Lightroom are optimized. You could set up the PSE11 editor application as your external editor in iPhoto preferences. iPhoto is obviously optimized.

  • Does photoshop cs5 work with mavericks?

    Hi all
    I have 2 iMacs with photoshop cs5 installed on one. I have upgraded to mavericks on my non-photoshop machine - which was more of a bumpy ride than I had expected.
    Now I wonder whether I should upgrade my photoshop iMac which is currently running os x 10.8.5. Have anyone tried running photoshop cs5 under mavericks - and if so how did it go?
    Kind regards
    Jack Jorgensen

    Since when I installed Mavericks my Photoshop CS5 - without warning - becomes all of a sudden unable to display the pull-down menus: they appear but are are solid white. That is, I lose completely control of Photoshop, and of all teh changes I made to a picture in the meantime. I does maintain a connection with the keyboard, but all the windows that may result from a keyboard command are also white. Flying blind, looks like.
    It never happened to me before, and it started happening after I installed Mavericks (and I checked online whether PS CS5 was ok with it before installing it, of course .... sure .... ).

  • Can photoshop elements work with layers/on a Mac?

    Hi,
    I would like to purchase photoshop elements 11 if the program allows you to work in layers.  I use to have photoshop 7 but since I changed my computer to a Mac I need a program that is compatible with the Mac.  Is photoshop elements 11 compatible?  I have been trying to get this information for quite some time.  No one seems to be able to help me in the stores.  Maybe you can.  Pleaseeeeeeeeee.  Thanks you
    Nanette Murray

    Photoshop Elements 11 is definitely available for the Mac.
    And it definitely has layers.
    If you want, you can download the trial which is the complete version but only works for 30 days. You can then judge if you like it and then buy it.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

  • Does Photoshop CS4 work with Windows 8?

    I tried to load the Photoshop software from my CS4 disk and I get an error message Startup is corrupt.  Contact Adobe.  It loaded perfectly in Vista previously.  What do I do now?
    Tom Cranmer

    We have only tested Creative Suite 5.5 and 6 with Windows 8.  Did you receive any error messages when installing Photoshop CS4 under Windows 8?

  • Will photoshop elements work with Cut master print and cut software

    Has anyone used photoshop for heat transfer design?

    Hello again.
    I am quite new to the program myself but over the last few weeks editing one particular image I have found that this program will do practically anything I want.  I just persevere through each frustration and eventually figure it out.  I just wish it were easier to remember what I did to get the result...oh wait, there is a way for that too lol.
    I believe you will find it best to have your image on its own layer.
    As for the rulers,  check to see if it is turned on, I believe that choice would be under the tab at the top labeled VIEW?  Not in front of puter right now so not sure exactly.
    Also, you might want to check your settings for many of this type of feature in the PREFERENCES area.
    Please let us know your progress.  Good luck!
    Sent from my iPhone

  • Does Photoshop Express work with Android Lollipop?

    Hello,
    Since i've upgrade my android phone to Lollipop i can't activate Premium looks in adobe express..
    Any ideas?

    PS Express works on Lollipop. Please update your app to the latest version. You can sign in with Adobe ID to get Premium features free.
    Please kill and relaunch app when you are in network and see if the premium looks work.

  • Does photoshop elements 13 work with windows vista?

    I have V10 and a Windows Vista PC that is fast and paid for,
    Thinking of purchasing new software from Adobe.
    Does photoshop elements 13 work with Windows Vista?

    No. Windows 7 or Windows 8.x only.
    System requirements | Adobe Photoshop Elements

  • So does Photoshop elements 13 require Win 7 or will it work with XP64 bit

    So does Photoshop Elements 13 require Win 7 or will it work with XP64 bit

    R_Kelly
    I looked at hamrick.com again and it seems to skip over the LS4500AF scanner. I queried him a few years ago and he indicated that the LS4500AF was an odd scanner needing a odd driver. It is SCSI also which in itself is another step. I would pay someone to rewrite the 32 bit driver but it would be more cost effective to keep a XP32 bit machine for the LS4500AF which I will probably do. I have been using XP64 bit for 10+ years and am really keen on it but with PSE 13 going to Win7 I will have to also.
    It takes me 3 or more months to get back to get my quality back up each time I change any hardware or software like an OS,  editor or computer. Fortunately my computer is good so I will not have to change it. And Summer is coming and that is my slow season time so aside from the several $s I should be fine come Fall.
    Bob  AZ

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

Maybe you are looking for