Does Photostream save the 8mp photo files or just reduced copies?
I had taken several pictures with my new iPhone4S, but wasn't immediately concerned with connecting to my computer to save them since they are saved in the Photostream.
I used the OS5 Photos app to edit several photos (mostly cropping) and then I went to look for a particular photo I had taken and it was gone. An entire section of about 40 photos vanished from the camera roll, and I believe they were in between 2 photos that had been edited.
So I went to the Photostream album and found my photos and "Saved" them back to the camera roll. However, they were only about 3 or 5mb resolution copies and my 8mp files are gone.
I'm just wondering if anyone else has had any similar problems
ED3K wrote:
Full resolution files are sent back to your computer for safekeeping, and kept in the cloud for 30 days. Smaller JPGs are sent to the iDevices, which helps speed up downloads. If you regularly use your iPad to import RAW photos from your camera, though, Photo Stream will send the whole files up to iCloud. Photo Stream has been this way since day one. Your Mac or PC will get the full resolution photo but your iOS device will only get a re-sized photo.
Apple FAQ http://support.apple.com/kb/HT4486
Thanks for your post! It answered my question. It's a SHAME photos are reduced in iOS device's Photostream.. they should give us the option for FULL RESOLUTION or device-optimized. :-/
Similar Messages
-
Does Firefox save the temporary internet files as form of JPG or AVI?
Hi
I really feel satisfaction about Firefox.
And I have a question that whether it remain or not temporary internet files as form of JPG, AVI etc.
I know that Firefox remains 'cache' when I surfing the internet with it.
You know, internet explorer remains temporary internet files as JPG file or AVI, MP4...
I'm just wondering that does Firefox remain 'caches' only.One way or another Firefox tries to save quite a bit of information in order to run smoothly and help you. What problem do you have that you are trying to solve ?
You may be interested in
* [[Settings for privacy, browsing history and do-not-track]]
* ''about:cache'' <-- Key into the location bar (Quickly becomes user unfriendly !! )
* You may find an addon that helps and works, try this search listing https://addons.mozilla.org/en-US/firefox/search/?q=cache+viewer&cat=1%2C0&appver=36.0&platform=WINNT -
Recording does not save the file
We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick -
Can I delete files in "All My Files" under Finder and Favorites without deleting them in the actual folders? If they will be deleted from the original folders then how do I put them on the external hard drive to save the documents, photos, and videos?
Switch to the Finder app and open its preferences.
Remove the check mark on the items you don't want displayed in the Sidebar tab.
The originals are not removed from the machine. -
Where does iWeb save the site file?
Sorry guys but this is a lazy man's question.
Where does iWeb save the site file when you click the save button?
Is it saved as a seperate file or is it hidden within the program?
I not talking about publishing it.Yes there is...I'll refer you to Apple's own technote...
http://docs.info.apple.com/article.html?artnum=303670
But you probably don't want to keep it on your iDisk. The file could be huge and the back and forth network bandwidth involved may make iWeb opens and saves unbearably slow. I've always recommended one of those cheap USB flash drives to keep a potable Domain file on.
Has this been "helpful" to you?
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's GuestMap! -
Where does JDeveloper save the info about last opened jspx / files ?
Hi all,
In JDev 10.1.3.1, Where does JDeveloper save the info about last opened jspx / files ?
e.g:
opened pages are : page1.jspx and faces-config.xml
after we save and close JDeveloper and Open again, i will start with same opened page/files : page1.jspx and faces-config.xml.
Where does JDeveloper save this settings ?
Thank you,
xtantoXtanto,
its jdeveloper_home\jdev\system\oracle.ide.10.1.3.<version>\preferences.xml
The most recent entries are last on the list. The editor reference also indicates whether this file was opened in WYSIWYG or Editor view
Frank -
My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site. -
Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!
http://support.apple.com/kb/HT1553Repair permissions and restart your computer. If this does not work, zap the pram. You should now see your external hard drive.
-
How can I save the update download file as I have several devises to upgrade and cant afford the bandwidth to do each via iTunes.
There does not appeare to be any doenloadable files in the download section."Well that's totally unacceptable."
Actually you can only accept it, as it is the way it is. You may not like it, but it is so. Sorry.
" your seriously telling me that Apple expect me to download the same huge file 8 TIMES"
That is exactly what I am telling you.
" No way."
Still true.
"Apple are going to have to come up with another solution."
No. They do not have to do any such thing. They may choose to do so in the future, but there is no reason to believe that they will. -
Where does iWeb save the contents of my website now that iDisk is not available?
With the latest change to iCloud and iDisk not available anymore, where does iWeb save the contents of websites?
I looked for the files undel Library/Application Support/....but could not find the iWeb folder.
Any ideas please?
Thank you.In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!
Use File >> Save As
Choose a different file name so as not to overwrite the original and don't save any changes when closing the original. -
How Do You Save The Saved Game Files On the iPhone If It's Possible?
Hi. Sometimes the best apps like games are 1GB or more and you need to erase it to make way for photos or videos but is there now a way to save the saved game files and other saved setting for other non-game apps? I'm on iOS 7 which is very nice once you get used to it (the icons and individual elements are not good looking on their own but as a whole, 7 is). If I delete it hours of work on say, an RPG app, will be restarted.
Thank you in advance.
God bless.Not possible to delete any apps included with iOS, and the App Store app is included.
Do you have Restrictions enabled on your iPhone?
Have you checked in every folder on every home screen? -
Hi, on my last PC when transferring music to my new MacBook Pro i noticed i had about 6 duplicated of each song in every album i took hours in removing them.
I Just wondered Does iTunes store the original music file and then copy it into a separate folder?
If i delete the original file from finder will it remove it from my iTunes library or vice versa. I didnt want to lose any music like i have some how managed to on my old computer.
Or should i keep both files of it in the Music folder and also iTunes library folder?
Which is best ?DrewPowell wrote:
I Just wondered Does iTunes store the original music file and then copy it into a separate folder?
It does both at the same time.
When you add files to iTunes, it copies them into /Music/iTunes/iTunes media/ folder. The original file remains where it was.
You can drag a file to /Music/iTunes/iTunes media/Automatically add to iTunes/ folder.
This will add to iTunes and move it to /Music/iTunes/iTunes media/.
I keep a shortcut of this folder on my desktop then simply drag files to the shortcut to add to iTunes.
Then there are no "extra" files around. -
How can I convert the ITHMB photo files to PC readable format like JPEG?
How can I convert the ITHMB photo files on my new Iphone 4s to a PC readable format like JPEG
Look at the link and follow instructions to convert the file taken from a different thread in this forum:
https://discussions.apple.com/thread/2640386?start=0&tstart=0 -
The photo print quality from my Mac to my Epson Artisan 810 is poor. I just purchased my iMac for my photography business in Jan. (this is my first Mac). When I first tried printing, I noticed the quality wasn't as good as I expected it to be. Then, I had to print 4-3.5x5s on a sheet, so I e-mailed the image to myself and opened it on my PC to print it (much easier to print that way on PC in Windows Photo Gallery - I think it's impossible to print that way in iPhoto). That's when I first noticed that when I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.
I've already been on the phone and e-mail w/Applecare many times over this issue. We've tried creating a test user and printing from there, and we've tried reinstalling the OS. I've tried printing from iPhoto, ImageCapture, and Preview apps/utilities, all w/the same result - no comparison to the PC-printed versions (no enhancements have been performed on the PC).
I'm out of ideas, and so is Applecare. They say it's most likely a driver issue b/c the printer is outdated, and that the only solution is to buy a new printer. BUT it is a pain for me to purchase a new printer - it takes days of research due to the nature of my business and the fact that I need a printer that can print directly onto a disc. I love this printer and don't want to have to buy a new one if I don't have to.englishfreak2004 wrote:
Yes. I've checked for updates, and the driver I installed is the same as the one on Epson's website. I also spoke with Epson Customer Service, which was a dead end. Apple says the problem is due to an Epson driver issue (blaming Epson), but Epson says that with the older printers, it's actually Apple who creates the driver, so the problem is actually with Apple. Typical he-said, she-said...
Maybe not. Probably worth checking here:
Epson drivers for Mavericks:
http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp
Maybe you are looking for
-
Adding leading zeros to the display data
hi folks, I have the character variable of size 9, if I get the value of the variable less than 9, I need to add leading zeros to it accordingly before displaying the numeric value stored in it. I tried to use the 'SHIFT' command for that it did not
-
DVI out to external monitor not working anymore
Hi, I have been using my MBP with an external Dell 17" LCD for a dual monitor setup. Suddenly after about 5 months of flawless working, it is not detecting the external display anymore. The display is not at fault - another powerbook detects is as us
-
2 Infopackages missing after installing Process Chain BI 7.0 TechContents
Hi, I have installed the process chains for BI 7.0 Technical Contents and when trying to run a check on the process chains, I got an error on these 2 infopackages which were not installed from the BI 7.0 technical content packages: 0PAK_472D695A0ZS3D
-
When is disponible Adobe Camrera Raw 6.7 with Olympus E-M5 support?
I'm looking forward
-
Can't use the two finger span to enlarge the images on the screen on my macbook pro
the macbook preo allows you to enlarge what is on the screen by spreading two fingers away from each other on the touch pad. The new ,ozilla firfox does not allow this to happen! When I could use it and enlarge type or a page to see better.