Does Pismo(Firewire) support OS 10 Tiger?

I have managed to up grade my old Pismo(Firewirs-400mhz) up to 10.3(Panther) but have several failed attempts upgrading to OS Tiger using the DVD installer disk. I am beginning to suspect that Pismo is showing it's limit here. Am I right? Has anyone been successful?

The Pismo will indeed support Tiger. You must meet the requirements to install Tiger: 256 MBs RAM minimum (512 MBs recommended) and 6 GBs or more free space on the hard drive. Be sure you have performed the firmware update. You must boot from OS 9.1 or higher in order to install the firmware update.
If you are trying to upgrade Panther as opposed to doing a clean install, then be sure you repair the hard drive and permissions before attempting to install OS X:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.0.6 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

  • How do I get firewire support under XP running on OSX 10.8.2?

    I have an old Nikon film scanner that is bundled with Nikon scanning software that requires Windows XP.  The film scanner has only a firewire cable.  My iMac is running OSX 10.8.2.  I installed Oracle's (free) VirtualBox and was able to get XP running on my mac.  However, I soon discovered that VirtualBox has no firewire support.  That sent me searching for other methods of running XP under OSX.  I thought Apple's Parallels 8 software would do the trick but I don't believe it supports firewire either.
    Can anyone give me an idea of what software would allow me to run XP with firewire support under OSX 10.8.2?
    Another question:  Do those firewire-to-USB adapter plugs work and are they safe to use?
    For those who have familiarity with film scanners, VueScan is not a desirable option for me because it does not fully support Digital Ice, while Nikon's software does.
    Thanks..

    OS X Lion: Use another Mac as a display
    It also works with Mountain Lion.

  • Firewire support

    i find it very hard to believe that ipods no longer support firewire connections. i called them and asked why this is and they gave me some bull s*&t answer. they said that usb is more popular than fire wire. when i said that is a load of bull since all macs since about 2000 come with 2 fire wire ports and the new dells come with it she didnt know what to say and just said they arent as popular.
    any one know why they are doing this? is there any way to use a fire wire cable with the new 60 gig?

    I don't speak for Apple but IMO, this was primarily due to the so many PCs not having a Firewire connection.
    Does your iMac not have a USB 2.0?
    I and many others agree about the loss of Firewire support but the following was copied from another thread here on this subject.
    480Mb copied from iPod:
    USB 1.1 - 11 min 15 seconds (G4/1GHz)
    USB 2.0 - 2 min 44 seconds (G5, 2.0 dual)
    (for comparison, the same folder copied in 2 min 18 seconds via FW from my 3g iPod)
    In this experiment, USB 2.0 was only 26 seconds slower than Firewire to transfer 480 MB so the transfer rate using USB 2.0 is not extremely slower than using Firewire.
    I don't believe there is a way to use a Firewire cable to transfer data with a new iPod.

  • Does Adobe Prelude support USB3 video import?

    Does Adobe Prelude support USB3 video import?

    Hello Michael,
    Thank you for the response. I have used Adobe OnLocation before with a firewire camera and a laptop. My Panasonic HMC150 has HDMI output instead of Firewire. What I was hoping to do was to connect my camera via HDMI to the BlackMagic Intensity Shuttle and then to my laptop running Prelude via USB 3.0. Do you know if any Adobe Product supports USB 3.0 camera input streaming?
    Regards,
    Mark
    Date: Mon, 10 Sep 2012 11:53:29 -0600
    From: [email protected]
    To: [email protected]
    Subject: Does Adobe Prelude support USB3 video import?
    Re: Does Adobe Prelude support USB3 video import? created by michaelgoshey in Adobe Prelude - View the full discussion
    Hi Mark,
    Prelude can ingest assets from mountable drives/volumes seen by the OS. If the device you connect via USB3 is mounted by the OS I would expect no issues with Prelude ingesting from it.
    However, if you are referring to the possibility of Prelude capturing a live stream from and camera via USB3 then that is not something Prelude supports.
    Happy to answer other questions you may have on this.
    Regards,
    Michael
    Product Owner, Adobe Prelude
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4687454#4687454
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4687454#4687454. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Prelude by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • What type of HDD does MS-6382 support?

    Hi,
    My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of  120 GB"
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
    I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
    I would be grateful for any help anyone can give!
    Here is some info on my current HDD:
    HD Tune: ST380020A Information
    Firmware version : 3.39
    Serial number    : 5GC0KMYD
    Capacity         : 73.1 GB (~78.5 GB)
    Buffer size      : 2048 KB
    Standard         : ATA/ATAPI-6
    Supported mode   : UDMA Mode 5 (Ultra ATA/100)
    Current mode     : UDMA Mode 5 (Ultra ATA/100)
    S.M.A.R.T                    : yes
    48-bit Address               : no
    Read Look-Ahead              : yes
    Write Cache                  : yes
    Host Protected Area          : yes
    Device Configuration Overlay : yes
    Automatic Acoustic Managment : yes
    Power Managment              : yes
    Advanced Power Managment     : yes
    Power-up in Standby          : no
    Security Mode                : yes
    Firmware Upgradable          : yes
    Partition     : 1
    Drive letter  : C:\
    Label         : MR01-G4
    Capacity      : 74822 MB
    Usage         : 17.54%
    Type          : FAT32
    Bootable      : Yes
    Jorolat

    Quote from: Wonkanoby on 19-June-05, 21:26:02
    ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
    the drive will run at about half that speed once the cache is cleared
    dont worry about it
    Er, I got another question
    I'm now looking at this hitachi model:
    http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
    which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
    The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
    http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
    but I thought I'ld ask before I order it or in case I change my mind (again).
    Thankyou for your help
    Jorolat

  • Does lion server support a single email address across multiple devices??

    I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
    I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
    How well will email and calendar entries sync across devices?

    I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
    As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
    I would ditch the exchange server move to Mac OS X Server, and never look back.
    God Luck!
    PS. All of your devices will be in sync all the time.
    Shore answer:
    Does lion server support a single email address across multiple devices??
    Yes.

  • Does 2 firewire audio and video interface can work together  on FCP ?

    hello,
    My audio interface is a TC Electronic Konnekt 24D
    my video interface is a Canopus ADVC 110
    my hard drives are plugged in firewire too
    and I use Final Cut Pro 5.0.4
    So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
    When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
    I want to use the voice over tool with the konnekt 24D, so what should I do ?
    Does 2 firewire audio and video interface can work together ?
    If so, maybe I only have a driver problem from TC Electronic.
    But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
    thanks
    eMac G4 1,25 Ghz Mac OS X (10.3.9)
    eMac G4 1,25 Ghz 1 Go RAM DDR   Mac OS X (10.3.9)  

    The 1082 does show up as a possible input when I open
    the VO tool.
    Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
    I use my Aja box for export & external monitoring.
    All my audio sources run back into the Tascam and I
    use the analog mixer in the 1082 to monitor different
    sources.
    When I view external video, the audio follows it to
    keep sync.
    that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
    I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
    I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

  • Does Crystal 2011 supports SAP R/3 4.6?

    Friends,
    I would like to know Does Crystal 2011 supports SAP R/3 4.6? Please help.
    Thanks,
    Tilak

    Hi,
    yes, it does. Here is a Screenshot from the CR2011 SPS6 Data Access File
    The (4) indicates:
    (4) SAP servers required to have at least the above patch levels. The following correction notes should be applied to your SAP BW / SAP NetWeaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048. OSS Correction Note 1007048 requires a manual configuration step.
    Regards
    -Seb.

  • Camera RAW does NOT yet support raw files for the new  Canon Sureshot S95

    Camera RAW does NOT yet support raw files for the new
    Canon Sureshot S95.
    Adobe, please can you provide an update asap

    Hello!
    I think that you need to be patient.
    There has not been any release of Camera Raw since the release of the camera.
    I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
    Usually, Adobe is amongs the firsts to support a new camera.
    Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

  • OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

    OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

    Hi there,
    If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
    There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
    Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
    I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
    I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
    Lion is fantastic, albeit maybe rushed.
    Any other queries, just ask,
    Nathan

  • Does Apple TV support wireless connection to the new MacBook Pro retina in an extended display mode?

    Does Apple TV support wireless connection to the MacBook Pro retina display in an extended display mode? What is the output resolution and is sound also transmitted across?

    SB1983, by extended display do you mean mirror?  All MBP since early 2011 support it if they are running OS X 10.8 Mountain Lion.  The resolution will depend on your Apple TV (2 Gen is 720 and 3rd Gen 1080) and wifi, it will lose some quality but I find it minimal.  It does also mirror the sound.
    Jules

  • Does AVL table supports popin in WebDynpro ABAP

    Hi,
    Just a short question, does AVL table supports popin in WebDynpro ABAP?
    I know that popin in supported in normal table in WD ABAP. Is this feature also available for ALV table?
    Thanks
    Yingzhi

    Hi Yingzhi Liu,
    Did you get any answers to this question?
    I'm also trying the same where we need to show additional details for an ALV table row. Is it possible to have a table popin in ALV? We are on 2004s release and implementing Web Dynpro for ABAP.

  • Does iTunes 11 supports 5.1 Speakers?

    Does iTunes 11 supports 5.1 Speakers? If yes which all speakers does it support and how to activate it on iTunes?I am able to play music in 5.1 surround mode using other players such as WMP 11, VLC, GOMP, WINAMP but when I play music using iTunes it only plays in stereo mode i.e. 2.1. The side / rear speakers do not give any output.
    Specs:
    Windows 7,
    Gigabyte FX990-UD3 Motherboard with 7.1 audio on-board support using 6 3.5mm jack pins.
    Creative SBS A520 5.1 speaker system.
    iTunes 11.1 installed.

    I think you mean HandBrake. I use HandBrake and I know exactly what you're talking about. Unfortunately, sometimes HandBrake shows that there is CC available but when you rip it, the CC doesn't appear in iTunes. I notice that but there is no way around it. This only happens with newer releases (I'm positive you only see this issue in newer films). HandBrake needs to be updated to keep up with the newer encryption by DVDs. There is nothing we can do. Hope that this post answered your question.

  • Does Form 10g support database 8.1.7..? what version it support? Thanks.

    Does Form 10g support database 8.1.7..? what version it support? Thanks.

    I've never heard, that forms 10g not runs on 8.1.7.
    The list of certified combinations can be found on metalink.oracle.com

  • Does Active Directory Support Non English Languages?

    Hi,
    I want to know that does Active Directory Support Non English Languages like japanes, Arabian?
    I think we can have domain name in non english languages also. How active directory handles it.
    Sandeep Gupta

    This actually isn't controlled by Active Directory but by the core operating system and its language packs.
    Server 2012
    http://www.microsoft.com/oem/en/installation/downloads/Pages/Windows-Server-2012-Language-Packs.aspx?mtag=TW-P-S12#fbid=CPJWmInHH14
    Server 2008 R2
    http://www.microsoft.com/en-us/download/details.aspx?id=1246
    Server 2008
    http://www.microsoft.com/en-us/download/details.aspx?id=22681
    Paul Bergson
    MVP - Directory Services MCITP: Enterprise Administrator
    MCTS, MCT, MCSE, MCSA, Security, BS CSci
    2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
    Twitter @pbbergs
    http://blogs.dirteam.com/blogs/paulbergson < br> Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided AS IS with no warranties, and confers no rights.

Maybe you are looking for