Does portal handle arrays in the same way as sql+ (in a form based on a procedure)..

I've got a package which has compiled without errors in Toad/Formatter Plus. When I try and create a from based on a procedure in PortalI get the error;
Line/Column Error
88/24 PLS-00201: identifier 'ARRAY' must be declared
88/24 PL/SQL: Item ignored
92/9 PLS-00320: the declaration of the type of this expression is incomplete or malformed
92/9 PL/SQL: Statement ignored
96/97 PLS-00320: the declaration of the type of this expression is incomplete or malformed
96/9 PL/SQL: Statement ignored
any ideas?

Please refer the following reply for your requirement.
Re: Setting a width for CoreSelectOneChoice
Hope this will help.
rahul

Similar Messages

  • How do I save a photo after I have zoomed in on it?  I want to save the zoom-in as a new photo and can't work out why this doesn't work the same way saving a cropped image, or adjusted image does.  Thank you.

    How do I save an image after I have zoomed in on it?  I can't work out why I can't save a zoom-in the same way
    I can save a cropped image or an adjusted image. Thanks, Lily A.

    Hi Matt, thanks for your reply.  Have realised that Zoom in Iphoto is just  a viewing tool and not an editing tool.
    Was creating beautiful abstractions by zooming in and wanted to create a new image of the result.   Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect.  Will perhaps have to try to create it when actually shooting.  Am doing a photoshop course in February and maybe will learn a bit more then, too.  Am pretty much an amateur just finding my way.
    Thanks again,
    Best, Lily

  • HT204406 I have subscribed to match on iTunes and organized my music on my Mac Book.  Why does it not appear the same way on my iPad

    I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book.  (and on my iPhone as well)  Since it is in the cloud, why does it not appear the same way in all devices?

    The purpose of iTunes match is to make your music library available to all of your devices anywhere. It will sync Playlists, but no other type of organization you may have made.
    If you're having trouble, be sure you are logged into the same Apple ID on all devices but be sure to read this article and pay special attention to associating your devices with an Apple ID. There are important restrictions you should know about.

  • Does the iPad 2 pass through TV the same way that the iPhone 4s does ?

    Does the iPad 2 pass through TV the same way that the iPhone 4s does ? I have an Arcam rCube dock which allows the tv pass through from the iPhone 4s and I was wondering if the iPad 2 will do the same if I buy a dock extender and what should I check for in a dock extender ?

    No - that feature does not exist on the iPad2 and I know of no plans - nor would anyone else here - for that feature to be added with a software update in the future.

  • HT1222 I just wish we had a "backwards" half circle to hit when we need to go back one page.  Does anyone else feel the same way?  How did I find this page anyway?

    I just wish we had a "backwards" half circle to hit when we need to go back one page.  Does anyone else feel the same way?  How did I find this page anyway?

    how about you just swipe from left to right.  works for me.

  • Does the iPhone Remote control a Mac mini in the same way as ATV?

    My ATV1 has packed in.
    Rather than having my MBP switched on just to listen to music through a new ATV to my hifi I am thinking of using a Mac Mini in the same way as ATV1.
    Does the iPhone Remote work with the Mini the same way as it does with the ATV or do you need to use a mouse and switch on the screen?

    If intending to use the Mini s a home theater system,
    you may want to consider getting Rowmote or Rowmote Pro
    app for the iPhone and the companion app for the Mac.
    Not only will you get Apple Remote functionality, but
    you will also get trackpad and keyboard functionality
    as well.  This will make it even easier to navigate the
    Mini on the TV.

  • Does the iPad save files in the same way, as a PC or computer?

    Does the iPad save files in the same way, as a PC or computer?

    Hi Jimmy3000
    The iPad can save files only through external applications such as Documents or DropBox App
    Click here for Documents App
    Click here for DropBox App

  • In HealthKit I keep getting no data while trying to get the cycle up on dashboard am I doing something wrong as I thought it would work in the same way the steps do

    IIn health kit I can't get the cycle to give data it just keeps saying No Data. Am I doing something wrong or can it not detect cycling in the same way it does for steps. Any advice would be helpful. Thanks

    Hey Rosco121,
    Thanks for the question. The following resource may be helpful in troubleshooting any issues you are experiencing with the Health app:
    If your Health data doesn't update
    http://support.apple.com/kb/HT6446?
    Use Health on your iPhone or iPod touch with iOS 8
    http://support.apple.com/kb/HT6357
    Thanks,
    Matt M.

  • How can I plott data from a text file in the same way as a media player using the pointer slide to go back and fort in my file?

    I would like to plott data from a text file in the same way as a media player does from a video file. I’m not sure how to create the pointer slide function. The vi could look something like the attached jpg.
    Please, can some one help me?
    Martin
    Attachments:
    Plotting from a text file like a media player example.jpg ‏61 KB

    HI Martin,
    i am not realy sure what you want!?!?
    i think you want to display only a part of the values you read from XYZ
    so what you can do:
    write all the values in an array.
    the size of the array is the max. value of the slide bar
    now you can select a part of the array (e.g. values from 100 to 200) and display this with a graph
    the other option is to use the history function of the graphes
    regards
    timo

  • How to get BufferedImage to treat zero in the same way as MemoryImageSource

    Hi!
    I was wondering if there is a way for BufferedImage to treat the value zero, i.e. 0, the same way as MemoryImageSource. After some testing I have found out that if the integer array that is used by MemoryImageSource contains a zero pixel value, it is treated as no value and the given background color to drawImage is used. When using BufferedImage, with type TYPE_INT_RGB, the zero value is treated as black.
    The problem is that I need to replace my MemoryImageSource instance with a BufferedImage to handle dynamic update better and I do not want to redesign the whole pixel array. Is there a way to get BufferedImage to treat 0 value pixels the same way as MemoryImageSource, i.e. treat them as no value and use the background color.
    Would really appreciate some help!
    Best regards
    Lars

    Have you tried using an ARGB image type instead of RGB? Then you can set the alpha of pixels you want to be transparent to zero.

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes

    Is it possible to stream music to multiple sets of speakers via airplay direct from iphone4s on ios7 in the same way that you can in iTunes / Remote?
    I know this can be achieved by the remote app.
    Airplay functionality appears only to support 1 set of speakers at a time?

    Hockeyfanatic wrote:
    Does anyone know how or if it's possible to stream my music from the iPhone to iTunes via bluetooth or wifi? Essentially I want to share the iPhone's library with iTunes (I know one can go the other way).
    Here's why: I'd like to stream my music at work to my computer's speakers without taking the phone out of my pocket. I obviously don't have my home music collection on my company computer. And I figure if I place the phone on my desk to plug it in and play through iTunes, I could easily walk off without the phone. That would be bad (out of contact) and potentially sad (stolen).
    It seems right now the only bluetooth connection to a computer is for the remote application.
    Wait until November. Airplay/Airtunes iOS 4.2 announced for iPhone to iTunes/iTV. If you want a BT audio stream now, you can add a dongle to the PC for headset streaming.
    As far as WiFi file transfer iPhone to iTunes, you can't. There's talks on it but nothing concrete. Except JB.

  • Re-using the same array on the same page later

    i am using an array to write values to a text file, is there a way to re-use that same array on the same page... after the values has been writen to a file, clear the values and use it again(no need to re-size it), just use it again....

    Thanks. I have a text box that takes a project id and calls a method that gets the data from db and stores it in a vector than i am looping throught the vector and assiging the values to an array and writing each value to a text file. i want to add another text field on there and see if the user wants to pass another project id (passing two) so i have to re-use the arrays again if the text box is not null. don't i need to re-define the arrays again to use them?

  • Typed tables is treated in the same way as a relational table?

    I'd like to know if the internal struct of oracle treats a typed table (table that contains object) in the same way of a relational table. For example, if I insert an object (that contains the atribute name as varchar2) into a typed table, and insert a regular register (name as varchar2) into a relational table, theoretically the execution time for both inserts must be the same? Thanks.

    > I have written my comments from my experience.
    I have used nested table with more 10+ levels with
    more than 400+object types for our projects.
    As you know bench mark is not done for 1 table or 1
    object, it is done with major project usage .
    In which case you're not benchmarking a specific feature, but the overall design of the system.
    I too am using object tables for specific Oracle applications. And the advantages that this provide significantly outweigh the cons - and a single such application process in excess of a billion rows per month per object table per month.
    > If you think Object is faster than relational tables
    in oracle then JAVA MUST BE FASTER THAN 'C' Language.
    Where did I say that object tables are faster than relational tables? How about trying to read what I said and then trying to understand what I conveyed?
    I said that
    a) objects tables are marginally slower than relational tables
    b) this performance difference cannot be used as the primary deciding factor on whether to use object tables or not
    As for your analogy that then "Java must be faster than C" is not relevant. Comparing apples with bananas. C is not C++. Java p-code is not machine code. So your analogy is meaningless and does not prove anything. Fact is that the speed of any programming language depends on numerous factors - and not just the language itself as you're are implying with this flawed analogy.
    Besides, trying to compare ADTs in Oracle to Java Classes, is silly. These are different tools intended for different usage.
    Bottom line - saying that ADTs and object tables in Oracle is "Bad" based purely on a marginal performance difference is idiotic. The design of the system and requirements of the system dictates the tools that are needed. And one of those tools can be and will be ADTs and object tables in certain cases.

  • How to get pictures organised the same way on the iPad as they are on the PC?

    When syncing pictures from my PC to my iPad the same albums are shown on my iPad as on my PC, but the pictures seems to be organised in random order within the albums, i.e. they are not organised the same way as on my PC. I've named all pictures on my PC and organised them based on name. Does anyone know how I can get iTunes/the iPad to sync the pictures in the same order?
    Best regards,
    Cecilie

    Are you syncing the photos by selecting folders or by selecting a photo app that you have on your computer ? If you are syncing folders then they will be sorted by their 'date modified' fields (I assume that still applies on iOS 8), not by their filenames - so you will need to amend their 'modified' fields to be in the order that you want them to show in.
    Or there are third-party photo management apps such as Photo Manager Pro (help pages) - you can copy photos to/from that app and your computer, and you can change the sort order of albums within the app.

Maybe you are looking for