Does Pr embed any meta data into the finished (exported) files?

I'm worried that it embeds my name, username or something like that into the finished movie files intended for distribution/playback. Is this the case?
If not, does it embed any kind of meta data? Perhaps that it was made with Premiere? Photoshop seems to add that to every file.

Many formats do not support MetaData, so depending on your chosen format, it is probably not even possible. Then, even where it is, such as WMV's and DRM, PrPro will not do that without direct input from you, and might not even be able to do that, if you wished.
Good luck,
Hunt
@ Joe,
Glad that it does not embed my arrest record (see Video Lounge thread: http://forums.adobe.com/thread/1167864?tstart=0 )...
Hunt

Similar Messages

Uploading Meter data into the system

Can some one please describe the process of uploading the meter data into CC&B.
What is the content of the flat file that i upload.can i upload a meter read XML file directly into the staging tables.....kindly explain the steps..I have not been able to upload any daat into the system using staging control and staging upload page.
Also i found out that there are batch process MUP1 and MUP2 which need be rum in order to upload the meter data into the system from the meter read staging table.Is this correct.
With regards to the meter upload staging table, i referred to the MR staging table : CI_MR_STAGE_UP
there is some data available with the installation as demo data.
For column MR_UP_STATUS_FLAG, there are values such as E, P, C...I unsersatnd there meaning.
1) For Pending P status, i submitted the batch processes MUP1 and then MUP2, expecting that teh status might change to Complete, c.......at the same time i ran MRUP-PRG ........well i was going to write nothing happened , but i saw that after some time all teh rows with ataus P and C are not present any more..........
2)How do i rectify the data with E status.........
Please helpp me uploading more data to the CI_MR_STAGE_UP Meter read staging table.

Hi,
thanks for the reply..
can u please tell me what is the content of the flat file that i upload.can i upload a meter read XML file directly into the staging tables.....kindly explain the steps..I have not been able to upload any daat into the system using staging control and staging upload page.
if u can give a flat file sample content for the meter read.
Also is it advisable to insert data into upload staging table through SQL drectly.
And can u pls tell me the difference between XAI upload staging table and other upload staging table such as for MR, FA etc.

I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
I don't want to start again with rating my (beautiful classical) music!
Thanks, from Amsterdam, NL

Did you do the move via Home Sharing, astro?
If so, perhaps try the instructions from the following post:
Re: i transfered itunes to my pc playlists did not go

I have accidentally deleted the trash bin in my mailbox and can no longer move any deleted mail into the trash. I thought I was removing all the emails from the trash but somehow managed to delete the bin instead. Does anyone know who to reinstate it?

I have accidentally deleted the trash bin in my mailbox and can no longer move any deleted mail into the trash. I thought I was removing all the emails from the trash bin but somehow managed to delete the bin instead. Does anyone know who to reinstate the bin?

You are running 10.6.8? If yes, I assume you have your install disks? As the trash bin is part of Mail app and that is an integral part of the OS, the only way I know to get it back is to reinstall the OS. You won't lose any files, just reinstall the OS over the top of the current system.

Insert data into the xml schema-based xmltype table problem!

Hello, there,
I got problem in inserting data into the xmltype table after registered XML schema and created table. details see below:
1) xml schema:
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" targetNamespace="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" elementFormDefault="qualified">
     
     <xs:simpleType name="RoutingType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Synch"/>
               <xs:enumeration value="Asynch"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="StatusType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACTIVE"/>
               <xs:enumeration value="VOID"/>
               <xs:enumeration value="PENDING"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="SenderApplicationType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PR"/>
               <xs:enumeration value="CR"/>
               <xs:enumeration value="POS"/>
               <xs:enumeration value="CPP"/>
               <xs:enumeration value="Other"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ServiceTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IS"/>
               <xs:enumeration value="WS"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RouteDirect">
          <xs:restriction base="xs:string">
               <xs:enumeration value="Request"/>
               <xs:enumeration value="Reply"/>
               <xs:enumeration value="None"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="Indicator">
          <xs:annotation>
               <xs:documentation>can we also change the value to "ON" and "OFF" instead? in this way this cn be shared by all type of switch indicator</xs:documentation>
          </xs:annotation>
          <xs:restriction base="xs:string">
               <xs:enumeration value="YES"/>
               <xs:enumeration value="NO"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="RuleType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ControlAct"/>
               <xs:enumeration value="WSPolicy"/>
               <xs:enumeration value="AccessControl"/>
               <xs:enumeration value="Certification"/>
               <xs:enumeration value="MessageConformance"/>
               <xs:enumeration value="Variant"/>
               <xs:enumeration value="Routing"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="HL7Result">
          <xs:restriction base="xs:string">
               <xs:enumeration value="ACCEPT"/>
               <xs:enumeration value="REFUSE"/>
               <xs:enumeration value="REJECT"/>
               <xs:enumeration value="ACK"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="IIPType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="PUT"/>
               <xs:enumeration value="GET/LIST"/>
               <xs:enumeration value="NOTIF"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ProfileTypeType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="IIPProfile"/>
               <xs:enumeration value="BizOperationProfile"/>
               <xs:enumeration value="OrchestrationProfile"/>
               <xs:enumeration value="DomainObjectProfile"/>
               <xs:enumeration value="ServiceProfile"/>
               <xs:enumeration value="ExceptionProfile"/>
               <xs:enumeration value="CustomizedProfile"/>
               <xs:enumeration value="SystemProfile"/>
               <xs:enumeration value="HL7XMLSchemaProfile"/>
               <xs:enumeration value="EnricherParametersProfile"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ParameterType">
          <xs:restriction base="xs:string">
               <xs:enumeration value="String"/>
               <xs:enumeration value="Object"/>
               <xs:enumeration value="Number"/>
               <xs:enumeration value="Document"/>
          </xs:restriction>
     </xs:simpleType>
     
     
     
     <xs:complexType name="ProfileType">
          <xs:annotation>
               <xs:documentation>
          1.Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
          2.ProfileID used to uniquely identify the current profile
          3.ProfileData used to hold all the necessary profile related data
          </xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="ProfileID" type="ProfileIDType">
                    <xs:annotation>
                         <xs:documentation>this will hold all the common attributes, espically the global unique identifier to the profile, no matter what type of profile is</xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ProfileData" type="ProfileDataType">
                    <xs:annotation>
                         <xs:documentation>all the non-common profile meta data that attached to each specific profile type such as IIPProfile, OrchestrationProfile, and BizOperationProfile will be placed here</xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="ProfileIDType">
          <xs:annotation>
               <xs:documentation>global unique identifier and all the common attributes across all different profiles, the @ID and @Type together will be used as the primary key to identify the profile data</xs:documentation>
          </xs:annotation>
          <xs:attribute name="ID" type="xs:ID" use="required">
               <xs:annotation>
                    <xs:documentation>ID is the global unique identifier to the profile, no matter what type of profile it is</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Name"/>
          <xs:attribute name="Description"/>
          <xs:attribute name="Version">
               <xs:annotation>
                    <xs:documentation>version of the profile data</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Type" type="ProfileTypeType" use="required">
               <xs:annotation>
                    <xs:documentation>value to identify the ProfileType type within
                    IIPProfile,BizOperationProfile,OrchestrationProfile,DomainObjectProfile
                    ServiceProfile,ExceptionProfile,SystemProfile,HL7XMLSchemaProfile,
                    EnricherParametersProfile,CustomizedProfile
                    </xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Status" type="StatusType" default="ACTIVE">
               <xs:annotation>
                    <xs:documentation>used to show the related profile data status like "ACTIVE","PENDING","VOID"...</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          
     </xs:complexType>
     <xs:complexType name="ProfileDataType">
          <xs:annotation>
               <xs:documentation>meta data associated tightly to each specific type of profile</xs:documentation>
          </xs:annotation>
          <xs:choice>
               <xs:element name="EnricherParametersProfileData" type="EnricherParametersDataType">
                    <xs:annotation>
                         <xs:documentation>Enricher Parameters related profile data
               1. one instance of this type may contains all the related System metadata.
               2. idType part may use to identify different version/release/status
               </xs:documentation>
                    </xs:annotation>
               </xs:element>
               <xs:element name="ExtendProfileData" type="ExtendProfileDataType">
                    <xs:annotation>
                         <xs:documentation>If needed, any profile data not defined within the current release scope can be added here </xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="ExtendProfileDataType">
          <xs:sequence>
               <xs:element name="ExtendProfile" type="xs:anyType" minOccurs="0"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParametersDataType">
          <xs:sequence>
               <xs:element name="EnricherParameter" type="EnricherParameter" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="EnricherParameter">
          <xs:sequence>
               <xs:element ref="Enricher"/>
          </xs:sequence>
          <xs:attribute name="serviceName" type="xs:string" use="required"/>
          <xs:attribute name="interactionID" type="xs:string"/>
     </xs:complexType>
     <xs:element name="Enricher">
          <xs:annotation>
               <xs:documentation>Comment describing your root element</xs:documentation>
          </xs:annotation>
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Parameters" type="Parameters"/>
                    <xs:element ref="Section" maxOccurs="unbounded"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="ValueType">
          <xs:attribute name="field" use="required"/>
          <xs:attribute name="value"/>
          <xs:attribute name="action"/>
     </xs:complexType>
     <xs:element name="Section">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Value" type="ValueType" minOccurs="0" maxOccurs="unbounded"/>
                    <xs:element ref="Section" minOccurs="0" maxOccurs="unbounded"/>
               </xs:sequence>
               <xs:attribute name="path" use="required"/>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="Parameters">
          <xs:sequence>
               <xs:element name="Parameter" minOccurs="0" maxOccurs="unbounded">
                    <xs:complexType>
                         <xs:attribute name="name" use="required"/>
                         <xs:attribute name="reference"/>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleList">
          <xs:annotation>
               <xs:documentation>an array of rules</xs:documentation>
          </xs:annotation>
          <xs:sequence>
               <xs:element name="Rule" type="RuleProfile" minOccurs="0" maxOccurs="unbounded"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="RuleProfile">
          <xs:attribute name="RName" use="required"/>
          <xs:attribute name="RType" type="RuleType" use="required"/>
          <xs:attribute name="Status" default="ON">
               <xs:annotation>
                    <xs:documentation>By default is ON (or if is missing)</xs:documentation>
               </xs:annotation>
          </xs:attribute>
          <xs:attribute name="Order"/>
          <xs:attribute name="Direction" type="RouteDirect">
               <xs:annotation>
                    <xs:documentation>Request / Reply</xs:documentation>
               </xs:annotation>
          </xs:attribute>
     </xs:complexType>
     
     
     
     <xs:element name="Profile" type="ProfileType">
          <xs:annotation>
               <xs:documentation>Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS</xs:documentation>
          </xs:annotation>
     </xs:element>
</xs:schema>
2)register xml schema:
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaurl=>'http://rac3-1-vip:8080/home/'||USER||'/xsd/EHIPProfile_v00.xsd',
5 schemadoc=>xdbURIType('/home/'||USER||'/xsd/EHIPProfile_v00.xsd').getClob(),
6 local=>True,
7 gentypes=>True,
8 genbean=>False,
9 gentables=>False
10 );
11 End;
12 /
PL/SQL procedure successfully completed.
SQL>
SQL>
3) xml data:
<?xml version="1.0" encoding="UTF-8"?>

<Profile xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1">
     <ProfileID Type="EnricherParametersProfile" Status="ACTIVE" ID="EnricherPP.ID.0001" Name="EnricherPP.ID.0001" Description="EnricherPP.ID.0001" Version="01"/>
     <ProfileData>
          <EnricherParametersProfileData>
               <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.ExceptionCreators:createExceptionV50CategoryCanonicalPart" interactionID="">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectCreators:createFindClientsAssociatedIdentifersRequestObject" interactionID="PRPA_IN101105CA">
               <Enricher>
                    <Parameters>
                         <Parameter name="MESSAGE_ID" reference="test"/>
                    </Parameters>
                    <Section path="HEADER">
                         <Section path="RESPONSE_TYPE">
                              <Value field="value" value="I"/>
                         </Section>
                         <Section path="HL7_STANDARD_VERSION">
                              <Value field="value" value="HL7V3"/>
                         </Section>
                         <Section path="PROCESSING_CODE">
                              <Value field="value" value="T"/>
                         </Section>
                         
                         <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
                              <Value field="value" value="NE"/>
                         </Section>
                         <Section path="RECEIVER_NETWORK_ADDRESS">
                              <Value field="value" value="prsunew.moh.hnet.bc.ca"/>
                         </Section>
                         <Section path="RECEIVER_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.40.5.1"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_NETWORK_ADDRESS">
                              <Value field="value" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_IDENTIFIER">
                              <Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
                              <Value field="extension" value=""/>
                         </Section>
                         <Section path="SENDING_APPLICATION_NAME">
                              <Value field="value" value="NL HIAL"/>
                         </Section>
                    </Section>
               </Enricher>
     </EnricherParameter>
          <EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectContentEnrichers:enrichPRRequest" interactionID="">

<Enricher>
     <Parameters>
          <Parameter name="MESSAGE_IDENTIFIER" reference="test"/>
     </Parameters>
     <Section path="HEADER">
          <Section path="HL7_STANDARD_VERSION">
               <Value field="value" value="V3PR2"/>
          </Section>
          
          
          <Section path="PROCESSING_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="PROCESSING_MODE_CODE">
               <Value field="value" value="T"/>
          </Section>
          
          <Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
               <Value field="value" value="NE"/>
          </Section>
          
          
          <Section path="RECEIVER_APPLICATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.1.14"/>
               <Value field="extension" value="SIT1"/>
          </Section>
          
          <Section path="RECEIVER_APPLICATION_NAME[0]">
               <Value field="value" value="receiverAppName"/>
          </Section>
          
          
          <Section path="RECEIVER_AGENT/RECEIVER_ORGANIZATION/RECEIVER_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.3.40.4.1"/>
               <Value field="extension" value="receiverOrgId"/>
          </Section>
          <Section path="SENDING_APPLICATION_NAME[0]">
               <Value field="value" value="NLPRSCLNT"/>
          </Section>
          
          
          <Section path="SENDING_AGENT/SENDING_ORGANIZATION/SENDING_ORGANIZATION_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="3001"/>
          </Section>
          <Section path="PERFORMER/HEALTHCARE_WORKER_IDENTIFIER[0]">
               <Value field="root" value="2.16.840.1.113883.4.3.57"/>
               <Value field="extension" value="HIAL_USR"/>
          </Section>
     </Section>
     <Section path="PAYLOAD">
          
          
          <Section path="AUDIT[0]/AUDIT_INFORMATION">
               <Value field="code" value="LATEST"/>
               <Value field="codeSystem" value="PRSAuditParameters"/>
          </Section>
          
          <Section path="CONFIDENCE/CONFIDENCE_VALUE">
               <Value field="value" value="100"/>
          </Section>
          
          <Section path="HISTORY/INCLUDE_HISTORY_INDICATOR">
               <Value field="value" value="false"/>
          </Section>
          
          <Section path="JURISDICTION/JURISDICTION_TYPE">
               <Value field="value" value="NL"/>
          </Section>
          
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[0]">
               <Value field="code" value="GRS_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[1]">
               <Value field="code" value="GRS_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[2]">
               <Value field="code" value="GRS_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[3]">
               <Value field="code" value="GRS_ORGANIZATION_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[4]">
               <Value field="code" value="GRS_PERSONAL_NAME"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[5]">
               <Value field="code" value="GRS_REGISTRY_IDENTIFIER"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[6]">
               <Value field="code" value="GRS_TELEPHONE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[7]">
               <Value field="code" value="PRS_CONDITION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[8]">
               <Value field="code" value="PRS_CONFIDENTIALITY_INDICATOR"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[9]">
               <Value field="code" value="PRS_DEMOGRAPHIC_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[10]">
               <Value field="code" value="PRS_DISCIPLINARY_ACTION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[11]">
               <Value field="code" value="PRS_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[12]">
               <Value field="code" value="PRS_NOTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[13]">
               <Value field="code" value="PRS_PROVIDER_CREDENTIAL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[14]">
               <Value field="code" value="PRS_PROVIDER_EXPERTISE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[15]">
               <Value field="code" value="PRS_PROVIDER_RELATIONSHIP"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[16]">
               <Value field="code" value="PRS_STATUS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[17]">
               <Value field="code" value="PRS_WORK_LOCATION"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[18]">
               <Value field="code" value="PRS_WORK_LOCATION_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[19]">
               <Value field="code" value="PRS_WORK_LOCATION_DETAIL"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[20]">
               <Value field="code" value="PRS_WORK_LOCATION_ELECTRONIC_ADDRESS"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[21]">
               <Value field="code" value="PRS_WORK_LOCATION_INFORMATION_ROUTE"/>
          </Section>
          <Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[22]">
               <Value field="code" value="PRS_WORK_LOCATION_TELEPHONE"/>
          </Section>
          
          <Section path="ROLE_CLASS /ROLE_CLASS_VALUE">
               <Value field="value" value="LIC"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_ELEMENT_NAME">
               <Value field="code" value="PrincipalPerson.name.value.family"/>
          </Section>
          <Section path="SORT_CONTROL[0]/SORT_CONTROL_DIRECTION_CODE">
               <Value field="value" value="A"/>
          </Section>
     </Section>
</Enricher>
     </EnricherParameter>
          </EnricherParametersProfileData>
     </ProfileData>
</Profile>
the data is valid against the schema through XML Spy tool... and loaded into the XDB repository...
4) create table and insert data:
SQL> CREATE TABLE EHIP_PROFILE OF SYS.XMLTYPE
2 XMLSCHEMA "http://rac3-1-vip:8080/home/EHIPSBUSER1/xsd/EHIPProfile_v00.xsd" ELEMENT "Profile"
3 ;
Table created.
SQL>
SQL> alter table EHIP_PROFILE
2 add CONSTRAINT EHIP_PROF_PK PRIMARY KEY(XMLDATA."ProfileID"."ID",XMLDATA."ProfileID"."Type");
Table altered.
SQL>
SQL>
SQL>
SQL>
SQL> select xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob() from dual;
XDBURITYPE('/HOME/'||USER||'/PROFILEDATA/ENRICHERPP.ID.0001.XML').GETCLOB()
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy
SQL>
SQL>
SQL> insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()));
insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()))
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
what's the problem caused the "ORA-21700: object does not exist or is marked for delete" error?
Thanks in advance for your help?

Thanks Marco,
Here're my environment:
SQL> select INSTANCE_NUMBER, INSTANCE_NAME,HOST_NAME,VERSION from v$instance;
INSTANCE_NUMBER INSTANCE_NAME HOST_NAME VERSION
2 rac32 RAC3-2 10.2.0.3.0
I followed your suggested in the above, and always purge recyclebin, but still got the same problem. because in 10gr2, there's no dbms_xmlschema.purge_schema available,
and I did checked the recyclebin after force the delete of schema, nothing inside. any other recommendation?

The meta data for the IDoc type "LOIPRO01" is unavailable

Hello,
i'm trying to send idocs via rfc from SAP ERP ECC 6.0 to SAP MII 12.06, but we always get errors like:
The meta data for the IDOC type LOIPRO01 is unavailable
I've checked the parameters on MII side of the IDOC Listener:
Servername MII_JCI33
server Properties
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
progid MII_JCI33
trace 1
params
snc_myname
snc_qop
snc_lib
unicode 1
max_startup_delay
Client Properties
client 303
user RFC-I33
alias_user
passwd
lang en
sysnr 02
ashost h33-i0.rz.k-plus-s.net
mshost H33-I0.rz.k-plus-s.net
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
r3name H33
group
tpname MII_JCI33
tphost H33-I0.rz.k-plus-s.net
type 3
trace 1
codepage 1
There is no saprouter between ERP and MII as in the thread from Christoph Mertins in November 2008. The user rfc-i33 on the ERP has SAP_ALL permissions.
Has anyone an idea ?
Kind Regards,
Thomas Strecker

Thomas,
There is a link for a basic IDoc installation that may help.
[IDocListener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
One other issue that has occurred to cause problems is registering the program in Visual Administrator. If you registered the ProgID in Visual Administrator, there will now be two ProgIDs registered (MII does self registration with the RFC Destination upon starting the server). Delete the registration in VA, if you did it.
If there are other error messages available, please post them.
Good luck,
Mike
I also just remembered, if you have two ProgIDs that are the same, running on two separate MII instances, you may run into a problem. Not sure it will have the same symptoms or error messages, but something else to check with (especially when migrating from dev to prod).
Edited by: Michael Appleby on Feb 10, 2009 5:02 PM

How can I transfer the meta data to the Oracle OLAP Object?

When I finished in building a simple DataWare house demo in the warehouse Builder, I got meta data. But it seems that those doesn't present in the "<Database>" - "OLAP" - "Dimension" where the Sample "SH" resides.I just want to export those metadata to the SQL script, but failing to import the script to the Database. How can I transfer my demo's meta data to the OLAP Object? It is the last step to finish the whole process and I can't solve the problem.
I'll appreciate any one who can help me.

Hello,
To enter/move the metadata for dimensions and facts to the OLAP catalog, you need to perform the following actions:
1) Create a business area in the OWB business tree holding the dimensions and facts you want in OLAP
2) Perform a metadata export, using the bridge (not to file!)
3) This will launch a wizard that will guide you through this process, follow the instructions carefully
4) Upon completion you will see metadata added into the OLAP catalog
We will be releasing a new version for this, which will be running on 9.2.0.2 database that allows you to use all the new 9i Release 2 OLAP features. This will create Analytic Workspaces from Warehouse Builder and should be released late this year (around end of November).
Hope this helps,
Jean-Pierre

Is it possible to copy the iTunes meta data to the mp3 files themselves?

I have recently began using MS Windows 8. As a long time user of iTunes, I have a very large and well organised library.
The music app built into MS Windows 8 is something which I would like to start using. Yet, it builds the music database from the mp3 files themselves; which after using iTunes for so long contain little (zero) information to describe each file.
Is it possible, to transfer the meta data stored in my iTunes library and save it to the mp3 files themselves - so that when I open the files in another media player, it contains the same descriptive information?
In advance, thanks.

Normally any meta data you edit in iTunes is copied to the tags, although iTunes doesn't always update things properly if the files in question have two or more embedded tags. You can however move the entire library without losing any information as follows.
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

Creating a collection from a query in Apex 4.2 is not populating the data into the collection.

I have a process that creates a collection with data from multiple tables. The query returns multiple rows in 'Sql commands' tab. The same query is used to create the collection in 'Before Header' and when i create a region with Region source as
Select * From apex_collections Where collection_name = 'load_dashboard';
At the time of rendering the page shows me 'no data found'.
what could be the problem? Are there any prerequisites before creating the collection?
Thanks in Advance,
Sriram

Hi Denes,
Below is my code for creating and saving data into the collection.
if apex_collection.collection_exists(p_collection_name =>'load_dashboard') then
   apex_collection.delete_collection(
         p_collection_name =>'load_dashboard');
end if;
apex_collection.create_collection_from_query(
    p_collection_name => 'load_dashboard',
    p_query => 'select a.rowid
               ,b.first_name
               ,b.last_name
               ,c.job_title
               ,d.parent
               ,d.child_level_1
               ,d.child_level_2
               ,a.resource_allocation
               ,a.person_id
               ,a.month_id
               ,a.oracom_project_id    ,wwv_flow_item.md5(a.rowid,b.first_name,b.last_name,c.job_title,d.parent,d.child_level_1,d.child_level_2,a.resource_allocation,a.person_id,a.month_id,a.oracom_project_id)
from oracom_resource_management a, oracom_people b,oracom_job c ,oracom_project d where a.supervisor_id=886302415 and a.month_id=201312 and a.oracom_job_id=c.job_id and a.person_id=b.person_id and a.oracom_project_id=d.oracom_project_id',
   p_generate_md5 => 'YES'
Sriram.

Uploading spreadsheet data into the database

Hi
I want to upload the spreadsheet data into the database through front end...I dont have any idea how to do upload without using the 'utilities' option..Can anyone please help me to do this?
Thanks in advance
Fazila

Hi
I refered the example sent by vikas...but i could not understand..I dont need to specify table name in runtime...my requirement is that I will have the constant table(say MD look up table)...and I will have some data under the column heading( say repid,split name)...
Now I want to import my spreadsheet data which are under the heading repid and split name through my front end application and I have the option whether to 'overwrite' the records or 'append' the new records...after clicking the necessary option..I want to import my spread sheet data into the table defined already...and my another requirement is that I want to check the duplication of data between the spreadsheet and table...If I find the duplicates, I have to omit it and store the remaing details....
Please give me some guidelines to solve this problem....
Thanks in advance
Fazila

Server could not find any Meta-Data devices!

Our MDC dropped out and the backups did not engage.
On a reboot of the MDC we were able to mount the volume, but all files (QuickTme movies, FCP projct files) could not be opened with an "unknown file type error".
We shut all the clients down we checked the volume and (cvfsck -nv) and while "dirty" it did not report any errors.
Stopped the volume and ran a cvfsck -w which gave us:
"Server could not find any Meta-Data devices!"
Checking Xsan admin logs shows us:
"PioOpen: no such device.
Fatal: Cannot open stripe group "md" - Operation not supported by device
Fatal: Physio_init failed."
Where "md" is our metadata storage pool.
We shutdown all switches, RAIDS, clients, etc, but bring them all back up and checking with one MDC or another is the same result. Volume will not mount.
All fiber connections seem good, checked in RAID admin and on switch.
Ideas?

AppleCare suggested that maybe a metadata backup could have helped.
http://docs.info.apple.com/article.html?artnum=303371
In any case, we nuked and paved.

APPENDING data into the sales text header of a sales order

Hi,
I need to write data into the sales text of a SALES ORDER. My problem is that if i use SAVE_TEXT it writes the new text and erases the old text.Is there any function module to append the data into the sales text or any setting in the function module which allows me to do so.
Regards

Hello Pankaj,
First using FM read_text and read the text.
Then Using the fm Edit_text edit the text as u want.
If useful reward .
Vasanth

INSERTION OF XML DATA INTO THE TABLE USING XMLDOM

hello,
i am using XMLDOM to insert the data into the table
i am using different function of it.
but i am facing the problem to retrive the the multiple entry.
like in my example i have two entry of the ' po number '
& i am using the function
dbms_xmldom.item(l_nodelist, 0)
i which i have to pass index no.
& through this i am getting only single entry according to the index no.
Example on which i am working is
declare
l_xml_data CLOB;
l_xml_doc dbms_xmldom.domdocument;
l_nodelist dbms_xmldom.DOMNodeList;
l_node dbms_xmldom.domnode;
l_xmltype XMLTYPE;
l_po_num VARCHAR2(30);
l_cust_ord VARCHAR2(30);
l_item_code VARCHAR2(30);
begin
l_xml_data := '<?xml version="1.0" encoding="UTF-8"?>

<MobileInventoryResponse>
     <message>
          <message-header>
               <message-id>16244182</message-id>
               <transaction-name>ship-advice</transaction-name>
               <partner-name>cbeyond</partner-name>
               <source-url>http://www.brightpoint.com</source-url>
               <create-timestamp>20080826150709</create-timestamp>
               <response-request>1</response-request>
          </message-header>
          <ship-advice>
               <header>
                    <customer-id>297859</customer-id>
                    <shipment-information>
                         <ship-first-name>RA_13Aug_1</ship-first-name>
                         <ship-last-name>MIND</ship-last-name>
                         <ship-address1>test</ship-address1>
                         <ship-city>test</ship-city>
                         <ship-state>VA</ship-state>
                         <ship-post-code>22102-4931</ship-post-code>
                         <ship-country-code>US</ship-country-code>
<ship-phone1>0040726335068</ship-phone1>
<ship-email>[email protected]</ship-email>
<ship-via>FX01</ship-via>
<ship-request-date>20080826</ship-request-date>
<ship-request-warehouse>CBY1</ship-request-warehouse>
</shipment-information>
<purchase-order-information>
<purchase-order-number>380928</purchase-order-number>
<purchase-order-number>380929</purchase-order-number> ----modi by Ananda Dubey
<account-description/>
<purchase-order-amount>0.0</purchase-order-amount>
<currency-code>USD</currency-code>
</purchase-order-information>
<order-header>
<customer-order-number>0002759</customer-order-number>
<customer-order-date>20080826</customer-order-date>
<order-sub-total>19.0</order-sub-total>
<order-discount>0.0</order-discount>
<order-tax1>0.0</order-tax1>
<order-tax2>0.0</order-tax2>
<order-tax3>0.0</order-tax3>
<order-shipment-charge>18.0</order-shipment-charge>
<order-total-net>0.0</order-total-net>
<order-status>Completed</order-status>
<order-type/>
<brightpoint-order-number>35028788</brightpoint-order-number>
<warehouse-id>CBY1</warehouse-id>
<ship-date>20080826</ship-date>
</order-header>
</header>
<detail>
<line-item>
<line-no>1</line-no>
<item-code>SKU1</item-code>
<universal-product-code>0</universal-product-code>
<ship-quantity>1.0</ship-quantity>
<unit-of-measure>EA</unit-of-measure>
<serial-list>
<serial-numbers>
<esn>TIMI000013</esn>
</serial-numbers>
</serial-list>
<line-status/>
<base-price>0.0</base-price>
<line-discount>0.0</line-discount>
<line-tax1>0.0</line-tax1>
<line-tax2>0.0</line-tax2>
<line-tax3>0.0</line-tax3>
<bill-of-lading>929406733828</bill-of-lading>
<scac>FX01</scac>
</line-item>
</detail>
</ship-advice>
<transactionInfo>
               <eventID>16244182</eventID>
          </transactionInfo>
     </message>
</MobileInventoryResponse>';
l_xml_doc := dbms_xmldom.newDomDocument(l_xml_data);
-- Method 1 to get data
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_po_num := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_po_num);
l_nodelist := dbms_xslprocessor.selectnodes(dbms_xmldom.makenode(l_xml_doc),
'/MobileInventoryResponse/message/ship-advice/detail/line-item/item-code');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_item_code := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_item_code);
l_xmltype := XMLTYPE(l_xml_data);
l_cust_ord := l_xmltype.extract('/MobileInventoryResponse/message/ship-advice/header/order-header/customer-order-number/text()').getStringVal();
dbms_output.put_line(l_cust_ord);
dbms_xmldom.freeDocument(l_xml_doc);
end;
/

In the following code
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from listYou need to understand what the second parm on the .item call does. See [dbms_xmldom.item|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_xmldom.htm#i1126138]
The nodelist is a 0 based array of information and you are only requesting to pull the node info in the first array position. So to get the info in the second array position, you need to use ", 1)". You can also use .getLength and a loop to parse through everything in the node list.

The meta data for the IDoc type "MATMAS05" is unavailable

Dear Gurus:
I need help in completing small test that I am doing to send MATMAS IDOC to xMII.
I have done:
1.     RFC connection SM69 and tested ok
2.             xMII IDOC Listner config with my SAP client
3.     Connection appears in smgw ok (in logon client screen)
4.     Completed Distribution channel and we20,we21
All above looks in place when I send one IDOC (BD10) it remains in 03 even after I run RBDMOIND. Besides IDOC is not appearing in C:\Lighthammer\JCO\Output.
On tRFC I see error The meta data for the IDoc type "MATMAS05" is unavailable.
Note that
a) I am NOT using transaction on routing tab
b) xMII version 11.5
c) I used "How to send IDOC ...." Version 2 PDF that is available on web (thanks to Bimal)
d) I looked at other two posts which has to do with LOIPRO message type and with JCO issue
Please help.
Thanks
Jay

Jay,
What version of ERP are you using, perhaps this note will help: 770239
Also the SAP Help has some suggestions as well...<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm">Click Here</a>
-Sam
null

Does Pr embed any meta data into the finished (exported) files?

Similar Messages

Maybe you are looking for