Does Premiere Elements 10 support more than 25 chapter markers?

Can anyone tell me if Version 10 supports more than 25 chapter markers? If not, is there an easy work-around other than using menus? Thanks.

If you bought PrE within 30-days, then Adobe offers a money-back return. Do not know how that would work with the bundle, and you might need to return them both, then buy just PSE. If you bought over 30 days ago, there is probably no direct recourse, but you might check with Adobe C/S (Customer Service), just in case. As they would be who you need to deal with, for a 30-day return, you can ask for full details.
I have yet to hear why the 25 Chapter limitation was imposed. Maybe a kind Adobe employee can comment? The old 99 limit was due to the allowable VTS's in the DVD-specs. That was fixed, very long ago, and I do not know of a way around it, even with professional authoring applications.
Good luck,
Hunt

Similar Messages

I have fail download the Adobe Premiere Elements 13 more than 5 times. I still can not download. What should I do?

I have fail download the Adobe Premiere Elements 13 more than 5 times. I still can not download. What should I do?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Does premiere elements support analog video

I have DVD's of analog videos burned from a 8mm Camcorder recorded in UDF format. Does Premiere Elements support analog video for editing?

theodorepost
Thanks for what sounds like good news.
I see no need for you to convert those VTS_01_1.VOB files into anything else.
Here is my suggested plan...
a. Download and install the free 30 day tryout of Premiere Elements 12 from Adobe
b. Put your DVD disc in the DVD burner tray. Open Premiere Elements 12 to the Expert workspace.
Click on File Menu/New/Export and set the project preset for NTSC DV Standard or Widescreen (depending on whether
your files are for standard 4:3 or widescreen 16:9)...do not forget the check mark next to "Force Selected Project Setting on
This Project".
c. Then back in the Expert workspace, use Add Media/"DVD Camera or Computer Drive"/Video Importer. In the Video Importer,
put a check mark next to your VTS_01_1.VOB, a check mark next to Add to Timeline, and designate at Save In location. Then click
Get Media to put the file in Project Assets and on the Timeline.
d. Then we can gauge the situation.
Again, if possible, do not purchase the program until you have work through the tryout in order determine if Premiere Elements 12 work for your video editing/export goals and is compatible with your computer environment.
We will be watching for further developments.
ATR
Add On...If any problems (I do not expect any) with Add Media/DVD Camera or Computer Drive), we might consider Add Media/Files and Folders/ and navigate to the VTS_01_1.VOB.

Does Premiere Elements support Intel Quick Sync?

Hi all,
Does anyone know if Premiere Elements supports Intel Quick Sync? If not, does anyone know if I can download the plugins made for Premiere Elements 8/9 and use it in version 10?
Thanks for any help.

You can use those plugins for 32-bit versions of Premiere Elements 10. PrE10 also has a 64-bit version and that will not support 3rd party 32-bit plugins.

Premiere Elements 11: More than one Youtube account

Hi!
I'm a beginner with Adobe Premiere Elements.
My problem:
I manage for 3 NGOs 3 different Youtube-Accounts. When I did the first YT-Upload from APE11 I set one YT-Account. But now I want to upload to another YT-account. Where can I change the YT-Login-Data in APE11?
Second question:
Which settings are the best for saving YT-videos if I don't use the direct upload with APE11?
Best wishes,
Ronald

For the highest-quality YouTube Export/Share, this FAQ Entry should be useful: http://forums.adobe.com/message/2759311#2759311
With three accounts, rather than going into settings and changing things each time that you want to use a different account, I would instead just Export/Share to the proper file, and then manually upload that to YouTube through the appropriate account, and not bother doing it directly from PrE. I do not know of any way to set up multiple YouTube accounts, and then access them individually, via a drop-down, on some other function.
Good luck,
Hunt

Does Premiere Elements support DVCPRO-HD? How do I ingest and work with HD-footage from HVX-200?

Hi there,
I work with Premiere Elements 11 on a windows PC, and I try to ingest HD-footage from Panasonic HVX-200 Camcorder. Premiere Elements only recognizes thumbnails, but not the footage itself? What do I have to do? Or does Elements only support SD-footage? Do I have to install DVCPRO-HD Codec? Where do I get it then?
Thanks for your help!, yours Mike

Welcome to the forum.
PrE does support HD material, just not all of it.
With DVCPRO HD on P2 media, I am not sure that you will be able to work directly with the media files from your Panasonic in PrE. This is the list of supported formats: http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-1665492e133c9c19956- 8000.html#WS300DE01D-F057-4639-96D1-F99EEE163C24
PrPro can Import and edit DVCPRO HD on P2 media. The Panasonic P2, along with its metadata is supported: http://www.adobe.com/products/premiere/extend.html
Good luck,
Hunt

X-Fi ExtremeGamer, does not not support more than 32 channels in

Hi
I just wanted to share my discovery
It seems that X-FI ExtremeGamer does not support more that 32 channels in World of Warcraft, when hardware acceleration is on. (32 cahnnels is one tick up).
Any higher than that, and i will get no sound at all.
My old card supported 28 cahnnels (Audigy 2).
Is this a Driver/WoW or Hardware Issue, this is what I would like to know.Message Edited by Septimius on 02-5-200703:59 AM

Catherina-CL wrote:
Hi [color="#000000"]Septimius,?There is a relevant post about that [url="http://preview.creativelabs.com/alchemy/Lists/General%20Discussion/DispForm.aspx?ID=46">here[/url], that should answer your question:?[color="#330099"]We've found this issue in-house as well and have a work-around for it.
The problem isn't with ALchemy. It's with WoW. We're working with Blizzard on the problem, but it happens in Vista with ALchemy or in Windows XP. Here's the fix:
. in the audio options, make sure the "Hardware Acceleration" box is checked
2. move the "hardware voices" slider to one of the first 3 positions from the left and restart the game.
my suggestion is to start at the third spot from the left and work back.
Again, we're working with Blizzard on this issue. Thanks for posting about it and hopefully that slider will be working properly soon.
Jessie Lawrence
Developer Relations
Creative Labs?
Cat
Cat,?I am not trying to be funny here, so don't take this the wrong way, but were in his post does he say he is running Vista? And can ALchamey be used under Windows XP?Amdrew Robinson.

Does Premiere Elements support video from Sony HDR-XR160 camcorder???

I have premiere elements 12 and I cannot get it to download video files taken with a Sony AVCHD camcorder HDR-XR160.

1001
Answers will be in the details. As a generalization, probably yes.
On what computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update? If not, please do so using an opened project's Help Menu/Update.
What are the properties of your source media that you are trying to import into your Premiere Elements project?
AVCHD.mts or AVCHD.mp4, 1920 x 1080 @ 60 progressive frames per second or other?
How are you trying to import files from your Sony HDR-XR160
a. Add Media/Videos from Flip or Camera/Video Importer - involves USB connection between camera and computer on which Premiere Elements is installed
or
b. Add Media/Files and Folders from the hard drive save location to where your files have been transferred from camera to computer.
Try setting the project preset manually first
NTSC AVCHD 1080p60
and then importing the 1080p60 into the project with that Add Media/Videos from Flip or Camera/Video Importer or Add Media/Files and Folders.
See details of manually setting project preset toward the bottom of the following blog
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If your program is on a Mac computer, use the AVCHD.mp4 choice instead of the AVCHD.mts choice or convert the AVCHD.mts to
AVCHD.mp4 if your are dealing with videos already recorded.
More details will help us to help you.
Thank you.
ATR

Does Snow Leopard support more than the originally recommended 2 GB RAM?

I have a MacBook Pro I bought in 2006 and it has 1.5 GB RAM. I know, not the best combo. So I want to upgrade it.
Are the specs for 2GB max RAM suggested for Tiger or Leopard only?
Would it make a difference to bump the RAM up to 4GB on my old machine now that I have Snow Leopard?

If it's a Core Duo model the max is 2 GBs. If it's a Core 2 Duo model the max is 4 GBs but only 3 GBs will be usable so you can install 3 GBs or 4 GBs with the same net result.
These limits are hardware determined. The OS does not affect it in any way.

Does premiere elements 13 support canon mov files?

Does Premiere Elements support Canon mov files or must I convert the mov file to a different format first? If I have to convert the mov file first, what file conversion program should I use and what file type should I convert it to?

Howard Scheer
Thanks for the additional very helpful information.
Two concerns in your case...
1. Canon 70D and its H.264 intra frame compression. Please refer to the following
current thread on the color fade of the exports of the Canon 70D footage
export quality
2. Premiere Elements 10 on a computer with a NVIDIA GeForce video card/graphics card
is bad news. The typical fix is to roll back the driver version to about May 2013. But, when the
computer operating system is Windows 8 or 8.1 64 bit, often there is not an older enough driver
version to revert to in order to get Premiere Elements 10 to display and work properly.
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Also see Announcement at top of this forum about the Premiere Elements 10/NVIDIA GeForce issue.
You should not expect to run into this problem in Premiere Elements 13. But, go tryout before purchase
to assure the compatibility of the program with your computer environment and project goals.
Please review and consider and then we can discuss your situation further.
Thank you.
ATR

Does Premiere elements 10 support MOV movie clip formats?

Does premiere elements 10 support MOV movie clip formats?

MOV is really but a wrapper, and can contain a broad range of CODEC's. Many, like PhotoJPEG, Animation, H.264, and many more will work fine, so long as one has Apple's QT Player installed, or the necessary CODEC's installed. However, if the file came from a Mac, and went to a PC, and had been Exported from FCP, or similar, there could well be one of the Apple Intermediate CODEC's inside, and most of those are NOT available on the PC. Also, if the file came from FCP, even if going to a Mac, there are CODEC's, that will only come from FCP, so one would need that program installed.
This ARTICLE will give you more detail on File Formats as "wrappers."
Please let us now what is inside that MOV wrapper, and someone can direct you.
Welcome to the forum, and good luck,
Hunt

Does Premiere Pro support a "self-record" mode?

Does Premiere Pro support a "self-record" mode? It would record a new video with the source being what you are previewing, in terms of "animation" rather than in terms of the quality seen on screen. I often like to make humorous effects by dragging the time indicator back and forth, and have to resort to recording my own screen while in semi-fullscreen mode, then import that video and crop out the chrome. This obviously is not optimal and results in significant quality loss. Does Pr itself have such a feature built in?
I doubt it does, but it would be extremely useful.

Ditto what mark said. The intended purpose of the project manager is basically to do just as you said. It was a great solution for anyone that wanted to store the few usable minutes of their media and were confident in just discarding the rest. The problem is that, as Mark said, it doesn't handle the trimming of all common file types these days. That's because, in video, 'destructive' editing is always a matter of re-exporting edited versions and project manage simply cannot export every format to any format. The original files are never actually being trimmed down, you're just getting new versions to replace the old ones with. This represents another drawback in the form of generational loss. That's why the Project Trimmer many not be the ideal solution for you even if it is able to trim all applicable formats for you.
I tend to agree with Jim and thing that the better way to go is with Prelude. With that app, you can log what you want before hand and then capture (or, more accurately, 'Ingest') just those parts from the start. Still, it might be a good idea to save the original footage on memory card(s), hard drive(s)s (or , dare I say, tape(s_?). That way if you find out later that you didn't capture (or ingest) all of what you wanted, you can always go back and get it. Also you'll have an additional backup which could easily be re-captured from the original source if you've save the prelude project(s).

ORA-24335 - cannot support more than 1000 columns - How to solve this?

Hi,
I got error message 'ORA-24335 - cannot support more than 1000 columns ' when i try to insert x no of rows for a table with following code:
INSERT ALL
INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
SELECT *
FROM DUAL
How to solve above?
What does it really mean? It's not as easy as if my table has 10 columns than I can't insert more than 100 rows (1000 columns divided with 10 columns = maximun 100 rows to insert), or?
Is there a better/more appropriate way to do insert many rows?
Should I do my inserts with an OracleTransaction (My application is developed with C# and asp.net), as ~follows
BEGIN
INSERT INTO tableA Values ('A', 'B', 'C', 1, 2, 3)
INSERT INTO tableA Values ('D', 'E', 'F', 4, 5, 6)
INSERT INTO tableA Values ('G', 'H', 'I', 7, 8, 9)
COMMIT
END
Thx in advance!
Edited by: user8819407 on 2010-mar-07 15:40

Hi,
So how did you solve the problem? Can you please give an example?
I have the same problem inserting over 1000 values into my Oracle DB. The table only has 51 columns but to speed up the insert command, I use bulk inserts via insert all command. I need to insert 100 rows at a time for a total of 5100 values.
Example:
SQLCmd = INSERT ALL INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
INTO MYTABLE (VAL_ID,VAL_NAME,VAL_NUM,VAL_TIME,VAL_CMM,VAL_TIME1,VAL_TRIP,VAL_REMAINING,VAL_AGE,VAL_COUNT,VAL_RSTS,VAL_VOLT,VAL_RF,VAL_DC,VAL_HOPS,VAL_STATUS,VAL_ELAPSED,MODIFY_TIME) VALUES (?,?,?,TO_DATE(?,?),?,TO_DATE(?,?),?,?,?,?,?,?,?,?,?,?,?,SYSTIMESTAMP)
SELECT 1 FROM DUAL
SQLVals = 1 22C38299 80700334 04-19-2012 13:55:33 mm-dd-yyyy hh24:mi:ss MCC93000 04/19/2012 13:55:42 mm-dd-yyyy hh24:mi:ss 12 4 0.792191 23 1 0.00 -113.50 13.48 9 1 9
1 36PR7038 8070EDC2 04-19-2012 12:24:35 mm-dd-yyyy hh24:mi:ss MCC60360 04/19/2012 12:24:41 mm-dd-yyyy hh24:mi:ss 7 4 0.757501 3 2 13.88 -114.80 14.06 5 1 6
1 42C63512 8050166F 04-19-2012 16:02:50 mm-dd-yyyy hh24:mi:ss MCC52420 04/19/2012 16:02:57 mm-dd-yyyy hh24:mi:ss 10 4 0.778471 8 1 0.00 -122.30 13.05 8 1 7
1 33MR3076 80803E75 04-19-2012 13:13:16 mm-dd-yyyy hh24:mi:ss MCC60330 04/19/2012 13:13:22 mm-dd-yyyy hh24:mi:ss 13 5 0.636721 28 3 0.00 -122.19 0.70 8 1 6
Then I call: &DBInsert($sqlCmd, @sqlVals);
This is the error I get: ORA-24335: cannot support more than 1000 columns.
I need to insert about 879,500 rows (51 cols per row). The values I read from a text file in sets of about 48,000 and put them into a hash. I tried inserting one row at a time, but it takes too long, about 28 hrs! Then, I tried the bulk update with only 6 rows and the total time was about 25 minutes. Which is acceptable to us.
Thanks!

Does Premiere Elements use a "rate curve" for pan/zoom?

Does Premiere Elements pan/zoom feature have a sort of accelerate/decelerate option, either user-selectable, or built in to the pan/zooms?
By accelerate/decelerate, I mean the pan/zoom will start very slowly, then over a period of just a second or two, accelerate to whatever constant speed it needs to move the user-defined distance in the user-defined time, and then at the end of the pan/zoom, decelerate over the last second or two, to a stop.
Makes the pan/zoom seem much more "human/organic"...as opposed to, "robot-like" if the pan/zoom does not gently accelerate/decelerate at the start and end.
Thanks...
Bill

Bill NM Aerial Photos
If you are referring to Bezier Curves and interpolation methods, yes with regard to keyframing the Motion Scale property (for Zoom) and the Motion Position property (for Pan). The Pan and Zoom Tool keyframes can also be adjusted. Keyframing of some other properties can also be adjusted.
From Premiere Elements 13/13.1 on Windows 7 or 8.1 64 bit.
Below is an example from keyframing of the Crop property.
What version of Premiere Elements do you presently have and on what computer operating system is it running? If you do not already
have Premiere Elements 13/13.1, please evaluate the tryout before purchase to determine the compatibility of the program with your
computer environment and video editing goals.
Please let me know if I have targeted your question. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I need a device support more than 40000 l2tp tunnels

we have a 7206 act a lns we found 7206 can support 16000 tunnels
Now we want to find a router to support 40000 tunnel
I find just Asr 1k 40g support 64000 tunnels
does asr 9006 support l2tp
I haven't found other device to support more than 40000 l2tp tunnel
Can Asr 1004 esp 40g can replace 7206
Thankyou
Tom

the ASR 9006 supports l2tp and the maximum number of tunnels supported is 131072 that can be configured with the maximum session command you can check the document below
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/bng/configuration/guide/b_bng_cg42asr9k.pdf

Does Premiere Elements 10 support more than 25 chapter markers?

Similar Messages

Maybe you are looking for