Does Premiere need to stay open after exporting into media encoder

After using the Export Media option to get my sequence into the Media Encoder, Premiere was closed accidently. This happened after 9 hrs of rendering and according to the encoder estimate I have 20 more hours to go. Is there a reason to restart if it is still running?

No. You can close PR while AME is running, no problem, no interference.

Similar Messages

Error when exporting from After Effects into Media Encoder

Hi there. I am using After Effects CC and am trying to export>add to Adobe Media Encoder CC. Upon doing so, instead of the file being placed into Media Encoder CC, I get an error message
I just updated to most recent update of After Effects via the Cloud today but no difference. Instead, After Effects just creates a folder on my system to house a duplicate composition file with "tmpAEtoAMEProject" at the beginning of file name. I can use the render queue out of After Effects just fine.
Can someone give me a solution to how I can export out to Media Encoder CC? Probably something simple I am just missing. I don't know much/can't find much about how to know if Adobe Dynamic Link components are installed. Oh, and I have also tried to just drag the files into Adobe Media Encoder too but I still get this warning. If it helps, I am on an imac OSX 10.8.5. Thanks!

Hey there. Yes, I have uninstalled AE, restarted, and reinstalled. Still get the same error shown in screenshot in my original question posted.

Premiere Pro CC not queuing exports into Media Encoder CC

I try to make this simple...
standard export from PP CC to ME CC
File -> export -> media, then hit queue.
Media encoder opens and just sits there. Left it for hours to see if anything would ever happen, and nothing ever did.
I've restarted the programs and machine dozens of times and that does nothing.
I can still export from PP CC.
I have no CS6 products left on my box.
I also tried to open the project from Media Encoder and load the sequence that way with no luck.
Thanks for the help!
On a Mac Pro
Premiere version 7.0.1
Media Encoder version 7.0.1.58
Adobe Creative Cloud for Teams Member (so it's licenced and updated to the fullest)

rforgaard wrote:
I had this exact same problem, and I figured out the solution in my case. I know the original problem report is ancient, but there are recent replies, so I am adding my solution here. I spent untold hours figuring this out, so hopefully this will save someone else some time.
There can be other causes to this problem, I'm sure. I'm just telling you about what fixed this problem for me.
Just to clarify, here is the symptom: Running Windows 8.1. Standard export from Premiere Pro CC 2014.2 to Media Encoder CC 2014.2, using File -> Export -> click Queue. Media Encoder opens and just sits there. Premiere Pro is hung and has to be forcibly terminated.
I spent countless hours on this. I thought I had messed up my computer's configuration somehow, so (believe it or not) I re-installed Windows on a freshly formatted hard disk, re-installed Creative Suite, same problem. (I can't believe I wasted all that time; I feel like a dummy.)
I finally narrowed it down to a very simple test case with a very tiny one-clip sequence that is less than one second long. Same problem.
It turned out to be a problem in the Premiere Pro project file itself. I suspect that a small file corruption somehow snuck into the project file, that was completely invisible. In that clip in my project, if I removed the "Vocal Enhancer" effect, the problem with exporting to Media Encoder went away. If I then re-added the very same "Vocal Enhancer" effect, the problem was still gone. It must be some small corruption in the ".prproj" file that went away when I removed the "Vocal Enhancer" effect and re-added it again.
NOTE: I DON'T think that there is some kind of bug with the "Vocal Enhancer" effect. I don't think this problem has anything to do with "Vocal Enhancer" per se. It is just some kind of small generic corruption in the project file. When Premiere Pro tries to export that sequence to Media Encoder, the problem occurs. It was just a coincidence in my case that removing and re-adding the "Vocal Enhancer" effect made the problem go away.
BOTTOM LINE: If you find that you have this bug where Premiere Pro hangs when exporting to the Media Encoder queue, try the following: Create a brand new project with a single clip in it, and export it to the Media Encoder queue. If that works, you know that it is not a problem with Premiere Pro in general; it's a problem in your specific project file. Once you've made this determination, make a copy of your original project file, and remove clips from the project until the problem goes away. Keep narrowing it down until you find the clip(s) that are the issue. Then, try removing and re-adding any effects on those clips, or even removing and re-adding the clips themselves, to fix the problem. Eventually, by removing and re-adding a specific effect or clip to your project, the problem will vanish (hopefully). It's just a matter of narrowing down which half of your project the problem occurs in, then which half of that half, etc., until you have it narrowed down to one clip or group of clips that need to be removed and re-added.
Having said all this, it is a bug that ideally should be fixed so someone else doesn't spend untold hours trying to figure out the problem. To that end, I create a tiny ZIP file that just has project file and the single media clip needed to reproduce the problem, along with a small description "READ ME.txt" file that explains the very simple steps to reproduce the problem. I have submitted this as a bug report to Adobe using their official online bug report form at www.adobe.com/cfusion/mmform/index.cfm?name=wishform along with a link to the ZIP file so they can download and reproduce the problem.
If anyone else is curious about reproducing this same bug, you can also download the small ZIP file if you want to. I guarantee it doesn't have any viruses or anything - it's just two small files to reproduce the problem. To download the ZIP file containing that project file, media file, and "READ ME.txt" file, you can get it at www.forgaard.com/files/PremiereProBug.zip.
I hope this saves someone some time. This one sucked up a zillion hours of me chasing apparitions.
I was having a problem with exporting a sequence to AME. PPro would freeze and I would have to force the program to close. This was on a project where I was just running out a bunch of interview clips for the director to look at. One of them had a audio effect (DeHummer) on it, and it was the one that was giving me troubles. I selected the audio and right clicked then "Render and Replace" then it would export to AME with no issue. Thank you for your well written response to this thread. While it may not have fixed the OP's issue, it did help with mine....
Thanks,
Phil

Premiere Pro freezes after exporting with Media Encoder

So I'm running the latest version of CC.
Mac Pro, OSX 10.9.2, 8-Core Xeon, 24GB RAM, ATI Radeon HD 5870 1GB
I've got a very simple and straight forward timeline. After sending "Exporting Media" via queue to Media Encoder, everything exports fine. But after returning to Premiere, it has become impossibly slow--practically frozen. No crash, no error message, just takes about 60 seconds for any clicks to register. I click save project, and the saving progress bar does not visibly progress, yet it seems to actually successfully save the project, because closing and launching premiere, the file is saved up-to-date just fine.
So for the past few days, I've been saving --> export/queue timeline --> quit premiere --> allow queue to complete --> then relaunch premiere... Of course, this is only a temporary work around.
Now, if I "Export" the media only without queueing in Encoder, it does fine and premiere remains stable and normal.
Ideas?

Exact same problem here, plus exports are slow
Specs
latest CC
OSX 10.9.2
3.4GHz Core i7
32Gb 1600MHz DDR3
GTX 680MX GPU
4TB Thunderbolt GRAID, footage/project files
3TB USB3 Seagate for cache
1TB Apple for system

Production order stays open after receipting into stock

Hello,
After I have receipted a production order into stock the production order stays open - should this not close the production order? Is the only way of closing it done by going into the order itself and changing the status to closed?
Many thanks,
Kate

Hi Kate,
It has to be closed manually and only then will the final journal entry be created in case of variance etc.
Jesper

How to make a dvd with audio track after exporting using media encoder? I have 2 seperate files??

Hello,
I need to just burn a video I finished. It's a m2v file and so I have a AC3 audio tack and a video track. I thought I was good to go, but I cannot figure out how to burn the audio and the video to the same disk! This is very annoying as the settings I have to use for export to keep video quality will give me 2 seperate files.
So, what programs do you use or recommend that allow me to add an audio track? I don't want people to have the option of switching between tracks I just want a normal track like you have when watching a movie, I mean it just plays by default.
Thanks in adv.
Mark

The caveats that I would issue to others are:
1.) muxed Assets often work fine, but can cause problems. Properly spec'ed. elemental streams seem to never cause problems.
2.) Encore will allow one to populate a Timeline with multiple Assets. However, it can get very confused in some cases. One is where an Audio Clip is just an Audio Unit, or two, too long, and one has a tiny gap, between their Videos. Using one Timeline per Sequence will always work, so long as the Assets are properly spec'ed.
I'm not saying that either of these WILL cause problems. Many do similar with zero issues. However, there is the potential for problems. Just use with care.
Good luck,
Hunt

Does the server app need to stay open?

Probably a dumb question, but do I need to keep the Server.app running at all times?
Our server is a Mac Mini that doubles as a workstation. Do I only need the Server app to set up/ start/ manage services, or does it need to be open all the time?

Server.app is "just" the GUI interface to the services. You can start or stop Server.app as and when needed. The services themselves won't be effected.

Stop bookmark menus from staying open after I move my mouse

I just updated to FF 6.0. My bookmarks menu has multiple folders containing additional bookmarks. When I open one of the bookmarks folders (sub-menus) the sub-menu stays open after I move my mouse. In the old version the menu closed when I moved my mouse. This is a problem because when it is open it obscures the menu below. This means that I have to close everything each time I want to move to a different folder. It also means that I MUST make a direct hit on the folder I want to open - pain in the 'you-know-what'.
I can't find anyway to turn this feature off - and if I can't I will have to uninstall this version.

Currently 664 [exported from FFox Bookmarks to URL Manager for the count] abut never more than 4000: beyond 4000 bookmarks and FFoxs' Bookmarks respond slowly even without Sync active. I currently have 5 computer with FFox set up to use Sync. While I don't expect FFox to manage a huge collection of URLs, I would be nice to be able to access a Bookmark collection of 6000 to 8000 without noticeable delay. It's a simple text file after all, and as I'm only effecting one URL, why so long to update?
fyi: URL Manager tells me that I've amassed about 300,000 bookmarks, some from the late 90's which I still use for research.

Make terminator stay open after command completion? [SOLVED]

I'd like to execute a command into terminator from my Openbox menu and have it stay open after the command completes.
I know urxvt does this with a "-hold" option but I'd like to just use one terminal instead of two or more for different things.
Last edited by jfb3 (2011-09-12 11:11:14)

Thanks.
I also found on the crunchbag forums that you can use a --profile flag (not mentioned in the terminator man page </sigh>)
terminator --profile stayopen --geometry 990x500+0+20 --command '{my command}'

Why does my iphoto slideshow turn blue after exporting?

why does my iphoto slideshow turn blue after exporting?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

Premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Mac OS X v10.5: Does the Finder always stay open?

First off: sorry again for all the n00b questions.
Next: So does the finder always stay "open"? Like with the blue dot below it. I already asked about the others and I realized I have to click command+Q but for the finder... it just stays "open"
Oh and Is there a way to search on this forum? I know on the forum for my car ('97 Acura CL if anyones curious) there is a search function that all the n00bs are told to do before starting a new thread...

You can quit the Finder but the option is hidden by default in OS X. As the Finder is the way that you interact with OS X its default is to restart automatically if it's quit. For example if it locked up (never happened to me though) and you used Force Quit (alt - command - esc) it would restart automatically. Using a third party application like TinkerTool (which simply opens up more of OS X'x capabilities) you can quit the Finder for specific purposes.
cheers
mrtotes

Does Aperture need to be open to import from photo stream?

Hi,
My photostream is linked to Aperture. Does Aperture need to be open to import from photo stream or will it still import while it's not running?
Thanks!
Mavericks 10.9
Aperture 3.5

Might seem silly but is there any way to request a daemon be created to handle this magically in the background? Or open and push iPhoto to the background so I don't know its running?

How do I export on Media Encoder CC and play on Premiere Pro CC without affecting the export?

I can export on media encoder and play on Premiere at the same time if I save my project > Close premiere pro > open Media encoder > import premiere pro sequence > start export > and open my project on premiere again.
But I`m having some issues with the playback quality (sometimes it stop and the audio starts getting out of sync), and the export gets slow.
Is there anything I can do to export and play at the same time?
I need the full quality of preview.
Working with codecs XDCAM HD 422 and ProRes 422 on Mac Os X 10.7.5 (2 X 2.66 GHz Quad-Core Intel Xeon) wiht 24GB 1066 DDR3 RAM
Hope u guys can help.

You can just queue up the export right from PP, start the encode and then go back to PP to continue working. No need to close anything.
Doing this will slow down the export process, as PP will steal whatever resources it needs to run, often pausing AME to do so.

Does Premiere need to stay open after exporting into media encoder

Similar Messages

Maybe you are looking for