Does Prime, any variant, do bandwidth monitoring?

I have been looking at Prime Infrastructure, trying to eliminate a mix of Entuity's Eye of the Storm and BMC's Network Automation. The LMS bit of CPI seems to cover what BMC does, with out any gaps. But my manager was interested in the reports on bandwidth utilization of key links. Entuity's Eye (Or NetScout, SolarWinds NPM, and such) would let you pick an interface or two and show the IN/OUT stats. From what I can tell, CPI is primarily aimed at TOP-N based statistics in a more general sense. Does anyone use a variant of Prime to watch traffic stats, and if so, what modules sould I be looking at?
Nick

Another reason to stick with Prime LMS for most non-wireless management for now. Assurance requires a separate license, an end device that supports Netflow, setting up exporters, etc.
Why in the world would PI not have a simple report you could generate based on the standard SNMP ifInOctets / if OutOctets MIB variables like every other network management system built in the past 20 years?!

Similar Messages

Server bandwidth-monitoring

so..right now, I'm using ntop (http://twilightlair.net:5000) as my bandwidth-monitor for my server. The two problems I have are that:
1. When looking at traffic summaries, it lists specific hosts with how much traffic they've sent/recv'd. instead of the destinations they're going to (i.e. which subdomains and whatnot.) It does say what subdomains they've gone to when you look at detailed info but that doesn't help much if there all a million hosts to sift through.
2. Almost half my traffic is just listed as "Other TCP/UDP Ports." The only way I see to get port-info is the "last minute distribution" on the bottom of the main page, not a monthly summary or something of the like.
any ideas?

I'm not a big fan of ntop for the same reason. I'm currently evaluating bandwidth monitoring tools to see which best fits my needs. There's a great listing of bandwidth monitoring tools for linux, along with a short description on this page: http://www.ubuntugeek.com/bandwidth-mon … linux.html I've learned of a handful of tools I didn't know about that I'll be experimenting with.
My needs are slightly different than yours, however. I need to take bandwidth measurements throughout the day at sample intervals and record the results into a log file or csv. I'll combine this with a script I wrote to upload a large file during the bandwidth test. I need to know the maximum upload rate in order to dynamically adjust my traffic shaping parameters.
Let me know which tools you end up using.

Is Bandwidth monitoring possible?

Hi,
I wanted to monitor my internet usage. Is it possible to build a bandwidth monitoring application using ActionScript 3.0 (with AIR + Flex).
Aim:
Get total downloads and uploads going via ethernet.
(If possible display the list of ethernet cards and wifi cards and the user can select the one needed to be monitored).
Also get the time of connection.
+(optional)
Automatically monitor if any transfers goes any ethernet or the ethernet after selecting the specific one thereafter.Any resources or any ideas regarding the above.
Thanks.

Dear Siva,
we did nearly the same in LV 4.0 times where the G Webserver was not integrated into LV. The only difference is that we used a java applet instead of javascript. It was running fine with Netscape 3 and Internet Explorer 4 on Win NT 4 machines.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Help! Does non US variant 808 pureview support joi...

Hello everyone. I bought my 808 PV from amazon in US as an upgrade to my n8. Love it, however I miss my Joikuspot. Has anyone out there used Joikuspot in a non US variant 808PV in the US with an at&t sim card successfully? According to Joikusoft Support, It should work fine in US, but they didn't know for sure. I am considering returning my phone to Amazon and buying a non US variant phone. I am willing to let go of my warranty in trade for Joikuspot again. Would like some confirmation that it will work before I go through the exchange. Thanks!

vlado3g,, check the text in green.... and yes, the N8 was sold before the FCC imposed those restrictions, to the best of my knowledge they came into effect 2011.
/Craig
Hi all,
This post is about using the third party application JoikuSpot in USA (and other FCC governed countries) and is copied to the following threads:
http://discussions.nokia.com/t5/Phone-Applications/Joikuspot-not-working-on-brand-new-Nokia-808/m-p/...
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Pureview-808-Intermittent-wireless-c...
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Help-Does-non-US-variant-808-purevie...
1) It doesn't matter where you get your Nokia 808 PureView from, ie it doesn't matter if it's a US, Singapore or Finnish variant.. If you are using that device on a network/carrier in the US, the device recognises this and is not going to allow you to make Ad-Hoc wlan connections, as per the regulations set out by the FCC.
2) I understand (this I am not certain on) that the FCC regulations came into force in 2011. Therefore for any device manufacturer since then, the device is not allowed to create Ad-Hoc networks otherwise the device manufacturer wouldn't get FCC approval.
3) The FCC restrictons are in this case technically talking about Ad-Hoc networks, not 'wifi direct' (http://en.wikipedia.org/wiki/Wi-Fi_Direct) networks that are used for example in Lumia 610/710/800/900.
4) I understand the US Variants of Nokia 808 PureView do not have JoikuSpot preinstalled.
5) I understand that US customers are not able to purchase JoikuSpot from Nokia Store.
6) JoikuSoft should be aware of this as they are making the software to create the Ad-Hoc networks. I will find someone to talk to JoikuSoft, failing that I will do it myself. I noticed a post from 'greentoy' claiming "According to Joikusoft Support, It should work fine in US, but they didn't know for sure.". Greentoy, if you're reading this please post me the JoikuSoft contact you had so I can sort this out with them.
It goes without saying, if you have Nokia 808 PureView in the US, and are using JoikuSpot successfully, then I am happy for you and don't want to cause problems for you, but I suspect the FCC would be happy to tell you about their feelings..
Are there any other questions I should be aware of using JoikuSpot in the US before I try to get in touch with JoikuSoft?

WAN bandwidth monitor?

Does anyone know a way to monitor the WAN traffic on a network? My ISP caps me at a certain amount of GB a month (up/down) and I'd like to monitor it on my end if possible? I realize this might be more a router thing though since we're talking monitoring the network of more than one machine...
Regards,
Kristin.

have you considered surplusmeter which you can get from this link:
http://www.mactricksandtips.com/2008/07/monitor-your-bandwidth-w-surplus-meter.h tml

Ea4500 and bandwidth monitoring

Hi.
I have a ea4500 router with 3 pc's, 4 iphones, 2 playstations, ipad, ps vita, house cat, and a printer all wired into the internet. There are four of us in the family all using the internet but I suspect one of us is using considerably more than the other. I live in the country and my current isp has us on the max available account - 50 gigs / month. Lately we have been hitting 45 in less than 3 weeks into the month. I would like to know which of the things connected or which person is using the most of the bandwidth up. Is there a program that doesn't require a phd in quantum physics and networking that can monitor this for me and spit out a report on who or what is the hog here?

Bandwidth monitor does not come handy with this device. However, you can dig a little deeper through Google to find third party software that could monitor bandwidth consumption for every device inside the network. I found one that monitors the bandwidth consumption of each application installed on my computer. This one only monitors one computer not the network. You might be able to find a network monitor if you dig a little dipper through the net.
How to Monitor the Bandwidth Consumption of Individual Applications
How to Monitor Your Bandwidth

My iphone 5 can't be charged. When I plugged my cable in, it just does show any charging sign. I have confirmed that it is not a cable problem

My iphone 5 can't be charged. When I plugged my cable in, it just does show any charging sign. I have confirmed that it is not a cable problem

Remove any lint/debris from the lightning port.
Use an official Apple cable.
Connect it to a wall outlets, some USB ports do not output sufficient power.
If none of the above resolves, take the device to Apple for evaluation.

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

Report to display in Grid for VAL10C TC even if I dnt select any variant

Hi everybody,
I am facing the problem with VL10C trasaction code. It is displaying report in normal list if we dnt select any variant. But I want to display in grid .
I have tried through settings for managing the layout but I was invain.
If select any variant then it is displaying in grid.
But with out grid how to display the report in grid.
its an urgent issue.
eagerly waiting for reply.
Thanks and regards
Jp

HI,
In the Third Button of Save Layout.Check the USer Specific settings of the Report Layout and save the Varaint.This will help.
Bala.M

Inserting a Flash video and the Bandwidth Monitor

I am new to Captivate, and I want to be sure I'm following
some practical guidelines for inserting Flash video in my Captivate
slides.
I know there are quite a few variables relating to practical
bandwidth usage--basically, we are creating elearning presenations
that will have "talking head" videos embedded within. These
presentations will be available for download via our LMS site, both
within the US and overseas.
I have utilized Captivate's Bandwidth Monitor to gauge the
bandwidth hit each video slide is responsible for. However, I don't
believe the numbers I'm getting back: because I've set each
embedded video to "Pause slide till end of video", all the slides
are reporting the same length in seconds, KB per sec and Video KB
numbers.
Can someone suggest a practical method for setting up the
videos such that the Bandwidth Monitor can interpret them
correctly? Can you also suggest a rule of thumb for maximum length
for each slide with an embedded video (320 X 240) in it?
Thanks in advance,
Carl

I am new to Captivate, and I want to be sure I'm following
some practical guidelines for inserting Flash video in my Captivate
slides.
I know there are quite a few variables relating to practical
bandwidth usage--basically, we are creating elearning presenations
that will have "talking head" videos embedded within. These
presentations will be available for download via our LMS site, both
within the US and overseas.
I have utilized Captivate's Bandwidth Monitor to gauge the
bandwidth hit each video slide is responsible for. However, I don't
believe the numbers I'm getting back: because I've set each
embedded video to "Pause slide till end of video", all the slides
are reporting the same length in seconds, KB per sec and Video KB
numbers.
Can someone suggest a practical method for setting up the
videos such that the Bandwidth Monitor can interpret them
correctly? Can you also suggest a rule of thumb for maximum length
for each slide with an embedded video (320 X 240) in it?
Thanks in advance,
Carl

When does an AP gets to Air-Monitor mode?

Q: When does an AP gets to Air-Monitor mode?
A: In a Mobility-controller AP deployment there are just 3 conditions that an AP can go into an Air-Monitor(AM) Mode:
1. If the am-mode is configured in the "rf dot11a-radio-profile" or "rf dot11g-radio-profile"
To see if it is configured in the radio profile please use this filter in the show running-config command
Example:
(Aruba) #show running-config | begin "rf dot11a-radio-profile"
Building Configuration...
rf dot11a-radio-profile "default"
mode am-mode ------------------------------------------------------------- Indicates that the Airmonitor is Enabled
2. If Mode Aware ARM is turned on in the ARM profile then th ap turns to AM mode when it sees excess power from the neighbor AP
To see if mode aware arm is enabled in the arm profile please use this filter in the show running-config command
(Aruba) #show running-config | begin "rf arm-profile"
Building Configuration...
rf arm-profile "default"
mode-aware ------------------------------------------------- Indicates that the mode aware arm is enabled
3. During the Regulatory mismatch or un-supported
a. When there is no channel available for the AP’s operation for the country defined on the controller.
Use the following command to verify the allowed channels for an AP
(Aruba-7240) #show ap allowed-channels ap-name <name-of-ap>
b. When AP’s has a different country with the controller’s Country.
Compare the country defined on the controller "(Aruba) #show country" to the country defined in the "(Aruba) #show ap regulatory-domain-profile <profile-name>". The ap regulatory-domain-profile will be mapped in the ap-group to which the ap is provisioned to.

Hi Marc,
I have a shop system comprised of two web applications where one is for
maintaining the shop and the other for using the shop. When I do changes
to the shop from the one webapp they do not show up in the second, unless
I call refresh. Also, I have to switch off the cache, it seems and do a
flush on the changed objects. There are some questions now:
a) when I call refresh, is the complete state reread regardless whether
there have been changes or not or does it know, when the state has not
changed in the DB ? it is a performance question, I guess.
b) can I use transactional reads to do the refresh automatically ?
c) I noticed that refresh does not do a deep refresh of all the objects
referenced by the one to be refreshed. Is there a way to do this or do I
have to go thru all the objects ?
I asked some questions some time ago in another thread, which might refer
to. I am sorry, if I am not clear enough.
Best regards
Wolfgang
Marc Prud'hommeaux wrote:
Wolfgang-
I take the question to mean that you are wondering how you can refresh
the state of a persistent instance to reflect changes in the data store.
If that is the case, then you can just call
PersistenceManager.refresh(ob) on the object, and the newer values will
be obtained.
If that doesn't help, can you clarify the question a little?
In article <cj7ris$mhr$[email protected]>, Wolfgang Kundrus wrote:
Do I have to use transactional reads for an object to get the changes done
by another web application ?
Thanks
Wolfgang
Marc Prud'hommeaux
SolarMetric Inc.

HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

NovaRiddle wrote:
I am having trouble pairing my iPhone4 with bluetooth device. ...
Depends on the device...
Have a look here for Supported Bluetooth Profiles
http://support.apple.com/kb/HT3647

User XIRWBUSER does not have authorization for message monitoring

Hi All,
In the Runtime WorkBench, when I choose the Message Monitoring, display Messages from Component Adapter Engine from Database, when I click on the start button, it shows me a error "User XIRWBUSER does not have authorization for message monitoring", how can I configure my xi to get the authorization for message monitoring of Adapter Engine? Thanks!
Regards,
Nick

Hi Nick,
Transaction PFCG. Enter the role you wish to check (SAP_XI_RWB_SERV_USER) and click on the display button.
Check that the Authorizations tab is green. If it is not, then you might need to generate the auth profile. Also check the User tab. If it is not green, then you should do a User Comparison as well (just click on the button inside the tab).
SAP Help URL:
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67151e439b11d1896f0000e8322d00/frameset.htm
Cheers
Manish

Does exist any way to working by vectors in Photoshop ?

I dlike to use some vector as a Photoshop brushes.... for example i make some graphics as you can see on picture 1 (it is AdobeIllustrator). Edges are nice smoothly. ..Then I exporting the same graphics from illustrator to Photoshop (as you can see on the pic 2). Edges are not smooth. Displayed graphics is rasterized and if i wont to sett bigger size of picture(graphics) then output is not good for me. Any Idea to solving this problem ?

does exist any way to working by vectors in Photoshop ?
Simple answer: YES
From your screen shots, your main problem is, you are working at too low a resolution.
Photoshops vectors are real vector objects. They are not "faked" at all. The Resolution of the file (similar to Illustrators pixel size in document setup) just sets how large the vectors will be rasterised, if output as a flat pixel based file. It doesn't mean that structurally Photoshops vectors are inferior to Illustrators vectors. In the end ALL printed output is rasterised at some point - and you upsample the containing document for Photoshops vectors to massive sizes if necessary.
You can copy and paste simple vector shapes from illustrator. You don't need to use Smart Objects. These pasted vectors can also be created directly in Photoshop - they be Vector layers, or paths.They can be reshaped, and worked with as vectors in Photoshop.
Now as Zeno says, brushes, in Photoshop, must be rasterised.If you still want to use illutstrators vector "brushes" you can use Smart Objects.

Variants for Filesystem monitoring in TechMon

Hello,
I am trying to create variant for Filesystem monitoring which satisfy my below requirement.
On particular single host I have following filesystems:
/oracle/ABC, /oracle/DEF, /oracle/XYZ - All these /oracle/SID should be monitored.
/oracle/ABC/sapdata01,02,03 ... 10 - Out of these I want to exclude only specific FS, like /oracle/ABC/sapdata03 and /oracle/XYZ/sapdata05
I checked document http://wiki.sdn.sap.com/wiki/download/attachments/269157890/Template+Maintenance+-+File+System+Variants.pdf
Based on it if I create variant as /oracle(/.*)*, every FS starting with /oracle gets monitored.
There is another example given in document, (?:(?!/oracle(/.*)*)(?!/aris(/.*)*).*)
The meaning is clear, but I could not adopt this to my requirement where I want to monitor everything starting with /oracle except /oracle/ABC/sapdata03 and /oracle/XYZ/sapdata05.
Please suggest. It would also be great if someone can help me understanding the meaning of symbols used in above Negative Regular Expression, like ?:/.*
Thanks in advance.
Regards,
Hrishikesh Wagle

Hello,
I could find out the solution.
To monitor everything starting with /oracle excluding every /oracle/SID/sapdata*
(?:(?!/oracle/(.*)/sapdata(/.*)*)(/oracle(/.*)*))
To monitor everything starting with /oracle excluding specific sapdata like /oracle/ABC/sapdata03 and /oracle/XYZ/sapdata05
((?!/oracle/ABC/sapdata03(/.*)*)(?!/oracle/XYZ/sapdata05(/.*)*)(/oracle(/.*)*))
Thanks.

Does Prime, any variant, do bandwidth monitoring?

Similar Messages

Maybe you are looking for