Does Prime Infrastructure 2.0 support 7.5 code?

I am currently running PI 1.3 and plan on upgrading to PI 2.0. Are 5508 Wireless Controllers 7.5 and MSE 7.5 code supported in release PI 2.0?

PI 2.0 was really intended for the converged access, but it will also support v7.5 and PI1.4 supported v7.5.
Management Support for WLC Release 7.5
Prime Infrastructure 1.4 provides management support for WLC Release 7.5 and associated features. In addition, this release provides support for AP platforms such as 3600P and 802.11ac module.
For more information about Cisco Unified Wireless Network (CUWN) Software Release 7.5, see the product bulletin at the following URL:
http://www.cisco.com/en/US/products/hw/modules/ps2797/prod_bulletins_list.html
For more information about the features of WLC Release 7.5, read the Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 7.5 available at the following URL:
http://www.cisco.com/en/US/products/ps10315/prod_release_notes_list.html

Similar Messages

  • Prime InfraStructure 2.2 - Support of Nexus 3524 model

    Hello Community,
    I am trying to find but I am not sure if Nexus 3524 is supported on Cisco Prime Infrastructure 2.2
    Please can someone clarify?
    thanks in advance,
    G

    Hi ,
    Cisco Nexus 3548 Switch    OID:1.3.6.1.4.1.9.12.3.1.3.1238        (NX-OS\(tm\)), IOS
    yes , it is supported , you can check the below link::
    http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
    Thanks-
    Afroz
    **Ratings Encourages Contributors ****

  • Is cisco prime infrastructure 1.2 support topology auto-discovery ?

         Is anyone konw it ?
         Thanks!

    PI (any version) does not yet have the Topology tool.
    It didn't get done and won't be included until sometime after 2.0 is released in June.

  • Cisco Prime Infrastructure 2.2 Supported Language

    Hi Team,
    We have deployed PI 2.2 into one of the client where they want Cisco PI in French Language, so all coming alarm, events, setting, etc will be display in French.
    It's would be much appreciate if someone from PI expert will guide us how we can achieve this?
    Thanks,
    Vishal

    Vishal, please close this thread/Mark this as answered to close, in case there are no more follow up questions. 
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them**

  • Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?

    I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to support it in any future device packs? 

    The Nexus 6001 isn't currently supported in PI 2.1. There's no workaround except to wait for a device or product update that adds support. Right now I know the 9000 series is on the 2.2 roadmap but I haven't seen any reference to the 6001 and PI.
    Interestingly, Prime LMS does support both the 6001 and 6004. Reference.

  • Cisco Prime Infrastructure 2.2 UCS support (C24)

    Hi,
    I recently upgraded a CPI 2.1 server to 2.2 hoping that it would support monitoring and managing a customer's C24 server. Unfortunately I hadn't read the Supported Devices list (http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html) where it is stated that UCS C220 M3 and C240 M3 are supported, but none of the other models.
    When can I expect support for C24 M3 (OID:1.3.6.1.4.1.9.1.1685) and the other UCS models?
    Mikael

    Cisco just added the Compute work center and UCS support in PI 2.2. I suspect they used the C220 as a first target since that's the platform for the upcoming hardware appliance refresh.
    While they haven't announced future release plans, typically we see incremental device updates via the update packages - those have been coming out almost monthly with PI 2.1.
    I'd encourage you to submit enhancement requests via your Cisco account team if the feature is important to you. Customer feedback is one of the key elements in deciding what features the developers focus on.

  • Prime Infrastructure- switch interface up/down history statistics.

    Hi. Does Prime Infrastructure support a way of showing when some specific interface was last seen up/down?
    For example I need to know which interfaces are not used very often (that are in the down state most of the time).
    Thanks!

    Pawel,
    Unfortunately PI 2.1 (and 2.2) do not yet allow us to define automated actions in the event of a specific syslog message being received.

  • Cisco Prime Infrastructure, Express, licensing

    Are there any funcionatility limitation between each edition of the Cisco Prime Infrastructure other than supported number of devices?
    Does it support turning APs on and off on a predefined scheduled?
    I read in the manual "Cisco Prime Infrastructure Classic View Configuration Guide for Wireless Devices" that it is possible to Managing WLAN Status Schedules.  Does it require the assurance license feature set or will lifecycle license will be sufficient?

    I believe you could create a scheduled Lightweight AP Configuration Template job and have it simply turn off the radios on the selected APs. Make it recurring (every night at a certain time) and add a complementary recurring job to turn the radios back on at the desired time.
    See the following screeenshot from PI 2.0 (click to enlarge):

  • Monitoring ASA in Cisco Prime infrastructure 2.2

    Hi everybody.  I have some issue with cisco Prime Infrastructure  2.2.  We use this product in our network for monitoring network devices and I need to monitor also our ASA 5550 device with soft 8.4.  I  added ASA to Cisco PI but see only basic component like my device can reachable via  and read via snmp. But cannot see  CPU, RAM, Device ENV like Temperature, l2l vpn connection,  Interfaces status and Utilization that interfaces, cannot see sub interface that placed on ASA like that g0/0.20.  I need fully monitor ASA and See logs and trap for my device:
    CPU RAM ENV (Temperature), Interface and sub interface status, L2L VPN  Status.
    1 Cisco Prime infrastructure can full support  ASA for monitoring and logging.. IF YES how can i configure  that features in Cisco PI 2.2 for ASA
    2 IF not which product Can full support that features for full monitoring and logging  ASA devices
    I have a little deadline for finishing
    thanks everybody before

    I've not success monitoring ASA interface utilization either. I'm using PI 2.2 with device update #1. The ASA is a 5585-X with 9.2(3) software.
    I have deployed the PI monitoring template to the ASA and do see its overall status and PI has enumerated the interfaces in the device page.
    I even looked at a packet capture and see PI querying the values of the interface counters and those values being sent back to PI - yet I cannot select any ASA interface when drilling down under Performance Detail monitoring.
    When I get some free time I will open a TAC case on it, meanwhile I am getting all the info I need from the upstream and downstream switches.

  • Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

    Prime Infrastructure/ Assurance is  positioned today more towards managing network elements and network performance,  rather than server infrastructure. We are in the process of adding Datacenter  component support, with more focus on Nexus and UCS- due later this  year.
    Having said that, Prime Infrastructure allows the system user to  add custom SNMP polling templates, which can then be used for polling any SNMP  based values from any SNMP enabled device. These can be used to collect the  information you specified below and the polled information will be available in  dashboards and reports.

  • UPS monitoring support with Cisco Prime Infrastructure 1.2

    Dear Members,
    Good day,
    I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
    Now can anyone gide that is it possible for below :-
    UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
    if yes
    Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
       a) UPS fault status information
       b) UPS operational status(input power available Y/N)
       c) Battery fault status
       d) Battery charging current
       e) Battery charge level
       f) Output current
    Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
    Thanks in Advance for your support & replies to this query.
    Regards,
    Muzammil N.

    Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
    So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

  • Prime Infrastructure supported Routers on small OVA

    Hello:
    Has any one seen PI small deployment managing routers too?
    PI Supports most of the models, but, the documentation says that it needs Extra Large OVA for 5,000 ISR Routers, (but for small, medium and large OVA , it says  ISR Routers: 0).
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/quickstart/guide/cpi_qsg.html#wp75828
    Does anybody know if a small or medium OVA can support, lets say, 150 routers?
    Thanks on advanced
    JE

    The PI documentation is lagging a bit - the only requirements for the current release are what's in the Quick Start Guide here.
    There is no requirement for dedicated cores. As long as your VM meets the hardware specification of the QSG, your installation should be OK. (Of course, it doesn't hurt to provide more than the minimum requirements.)

  • What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

    What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

    • PI provides visibility for autonomous  clients within the same list view as lightweight and wired clients (client list  page).
    • Rogue AP detection for autonomous AP's is not supported (it's  supported in CUWN). 
    • Alarms/events for client authentication issues (e.g.  authentication failure) are displayed in PI.
    • Config management for  autonomous AP's is via CLI template.  Config comparison and archiving  functionality in PI leverages these same features that were brought in from LMS,  so need to defer to others in terms of whether this is a cross-platform feature  in PI or is only supported on a subset of platforms.  Config comparison/archive  is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and  Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client  sessions, etc.) reports, and there are extensive reports for CUWN

  • When is Cisco Prime Infrastructure 2.0 released, and what does 2.0 offer?

                       We are running Prime Infrastructure 1.3 primarily for wireless management at this point.  We have enough licenses to add all our switches, routers, and firewalls, but we're hesitant to do so until 2.0 comes out.  While there are some features for backing up and configuring switches and routers, 1.3 still seems pretty limited in regards to non-wireless features.  For example, nearly every report in 1.3 is for wireless controllers or AP's, there are no reports I've found relevent for switches and routers.  I've read a lot of blogs, cisco posts, and white papers talking about how Cisco Prime Infrastrucure 2.0 will finally consolidate Prime into a truly all-in-one network management suite that can manage the entire Cisco environment.  Does anyone know when it's officially being released?  Does anyone have an tech sheets on what's new in 2.0, or what its capabilities are?  I want to better understand what 2.0 has to offer, when it's coming out, how to upgrade, so I can start planning for the upgrade and eventually importing all our network devices to Cisco Prime for centralized management.  Any useful information or links would be appreciated.
    Thanks,
    Christian

    PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
    I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
    For what does it have for customers?
    > As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
    As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
    With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
    -Thanks

  • Prime Infrastructure 2.0: Open Database Schema Support available?

    Hello,
    I searched the forum for an Open Database Schema Support for PI.
    I only found Open Database Schemas for the Cisco Works LAN Managemet Solutions and Cisco Prime LAN Managemet Solutions.
    Exists an open Database Schema Support for Prime Infrastructure 2.0 as it exists for the older LAN Managemet Solutions ?
    Thanks.
    Bastian

    Programmatic interface to Prime Infrastructure is done via the the REST API vs. any open database schema.
    There are published reference guides here. For the most up to date information, please see your PI server itself. In Lifecycle view, the help menu has a link to the server-based API information:

Maybe you are looking for