Does Prores SD require FCP 6

Hi,
Can I use Prores SD with FCP 5 to capture footage with an AJA Io LD and do simple editing and color correction or is FCP 6 required?
Thanks!
Mitch

The ProRes codec is only installed and licensed with Final Cut Studio 2. While the IoHD has ProRes built-in, your system won't be able to playback ProRes material.

Similar Messages

  • Using Qmaster with DVD Studio Pro OR Qmaster requires FCP on all machines?

    Greetings everyone,
    After a few days of tinkering I've finally managed to set up a managed cluster. However, I have a problem (surprise, surprise). When I submit a job to the cluster, Final Cut Pro suddenly opens up on all of the computers being used. I have Final Cut Studio 2 under an academic license, and all copies report that there is another copy running with the same serial number and that they must shut down. They render a few frames before suddenly quitting the job, regardless of whether I leave the message up or OK it away. I've done some reading from this thread which makes it sound like all systems must have a copy of FCP installed, or to use a slightly different method:
    http://discussions.apple.com/thread.jspa?threadID=375923&tstart=195
    It's a bit upsetting as I'd originally read that systems could aid in rendering with just QMaster installed, and that they didn't need FCP installed. Hence, having FCP open up was unexpected, and I get the feeling that uninstalling FCP from those systems wouldn't help me.
    But let me explain what I do normally, and perhaps some of you can guide me.
    My work has me converting hundreds of tapes to DVD. Without QMaster, I would import the videos in Final Cut Pro, set chapter markers and in and out points, and then export the video (with barely any processing - an export typically takes 4 minutes on a dual 800 Mhz G4). I'd then import it to DVD Studio Pro, handle the menus, and then do a build and format. That process would take ~2-3 hours per DVD, and that is the part that I'd like to optimize.
    The setup is such that I have one dual G5 wired to our hard drives (all Firewire 800), and then four other systems that connect to the G5 to access the HDs through a gigabit network switch. This has worked quite nicely in that it allows systems that only have Firewire 400 to work at Firewire 800 speeds regardless.
    I'd originally thought that DVD Studio Pro 4 would automatically be able to process jobs through Qmaster, but I couldn't find a setting for it and it didn't seem to do it on its own. Instead, I was planning to redo my work flow such that the encoding of the video (the most time-consuming part of DVD Studio Pro's build procedure) would be done in Final Cut Pro. Or more specifically, it would go through Compressor. However, as I mentioned above, attempting to work this way causes Final Cut Pro to open up on all nodes within the cluster. As they all have the same serial number, they become unhappy under such conditions. I can uninstall them from the systems as I only ever use one copy at a time anyway, but as I mentioned from the link above, it seems that rendering through FCP -> Compressor will require FCP to be installed on all participating systems.
    Does anyone have any advice for what to do? Is there a way to get around having FCP activate on all participating systems, or is there a way to do it directly through DVD Studio Pro (ideally in a manner that wouldn't cause DVD Studio Pro to activate on all participating systems)?
    Any advice is much appreciated. The distributed encoding is really the only reason why we upgraded to Final Cut Studio 2, so I'm going to feel rather foolish if this doesn't work out.

    A QCluster network isn't designed to distribute Rendering from FCP, rather it's designed to distribute encoding tasks.
    As mentioned in that thread you linked to, the best workflow I can think of in your situation is to export Quicktime reference movies from FCP, then bring those reference files into Compressor for distribution to the QCluster for the transcode to MPEG 2 for DVD. There is a wealth of good information in that thread.
    In short, if you attempt to use a Cluster to export from FCP, then all of your nodes will need to have separate licenses of FCP. But if you use the reference movie method, FCP is not required for the encoding.
    One question for clarification with your workflow, are you logging & capturing these clips then sending them directly to DVD? or are you editing them in a timeline prior to export to DVD?
    If you're just using FCP as your Log & Capture tool, then you can skip the reference movie step and just grab the captured clips in your Capture Scratch folder and send those directly to Compressor.

  • Apple Pro Res 4444, does it work with FCP 6?

    Does ProRes 4444 work with FCP 6? I don't think so but wanted to check before I had the film lab telecine my film. I'm stuck with FCP 6. Might have to go with ProRes 422 (HQ) ?

    Jon Chappell wrote:
    Are you 100% sure that you can write to ProRes 4444 files in QT 7.6.2? I would have thought you'd need FCS3 for that.
    See, I knew the editing gods would humble me.
    I just re-tested this on a separate FCS 2 partition and it turns out my memory was failing. While you can read and import the new ProRes codecs, you can cannot render out to them in the FCP 6 + QT 7.6.2 universe. So yeah, getting all ProRes4444 files would be a hassle on an FCP 6 setup.
    Ugh, sorry for the bad steer.

  • Does Logic 9 Support FCP Capture Cards?

    Does Logic 9 support FCP video capture cards for audio in an out?
    I have a Blackmagic Decklink Extreme, analog ins/outs as well as digital AES/EBU
    Didn't have much luck with Logic 8 and the FCP cards so I used my Line 6 GuitarPort but it only has one 1/4" phono input.
    FutureX

    Hi FutureX,
    I would suggest you ask your question on the FCP forum if you don't get any reply here. Maybe you'll find someone there who can be of help. In any event, i doubt that buying an MBox with PT LE will meet your requirement for FCP capture cards, really!
    Apple won't respond to you here. That's not the place. This is a user forum. You could also call a production studio in your area and ask politely to a pro who's working with that stuff on a daily basis. I'm sure you can find someone. Good luck...

  • Does IC WebClient require a J2EE engine for any of its component

    Does IC WebClient requires a J2EE engine for any of its component? What's the need to install j2ee engine on CRM server?
    I would appreciate if anybody could give a good answer or any kind of documentation on it.

    Prakash,
    The answer is yes in terms of the J2EE enginge being required.  It primarily handles your multichannel access and broadcast messaging for the call center.  If you don't install it, then your IC webclient will not work correctly.  We are not using the "telphony" features of the call center, but still installed the java piece so that the standard functionality would work correctly.
    Good luck,
    Stephen

  • Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

    Hi
    I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
    I'm having trouble delegating Reporting Services Web Access to a standard domain user.
    I have followed the instructions from these blogs:
    http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
    http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
    No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
    "User domain\user does not have required permissions........"
    The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
    Then everything will show up.
    Any ideas on how to troubleshoot this?

    Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
    In srsrp.log I got these error messages:
    Could not retrieve the reporting service name for instance 'MSSQLSERVER'
    Invalid class
    Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
    http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
    So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
    and BAAM, everything started to work =)
    /ALX

  • Ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been

    I installed SSRS on an existing instance. Configured SSRS using report manager, loaded some reports and they work as expected.
    The problem is I can not launch(IE)  Report Manager UI due to error in description. I can launch the Report Manager IF I RUN IE AS ADMINISTRATOR. The details of error from SSRS log file listed below.
    The main page SSRS page starts to display. The display starts with "Home | my subscriptions |site Settings..." in upper right side, and "SQL Server Reporting Services" in upper left. Then the error displays
    User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient     permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
    Starting IE as administrator starts the Report Manager with out problems.
    Does anyone have suggestion, is more information needed?  Thanks, Joe
    library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetPermissionsAction(/).
    ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
    granted and Windows User Account Control (UAC) restrictions have been addressed.
       at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPermissionsAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: HTTP status code --> 500
    -------Details--------
    Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
    have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)  
    at System.Web.UI.Page.OnInit
    (EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPropertiesAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
       at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
    library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetPermissionsAction(/).
    ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
    granted and Windows User Account Control (UAC) restrictions have been addressed.
       at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetSystemPermissionsAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: HTTP status code --> 500
    -------Details--------
    Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
    have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)  
    at System.Web.UI.Page.OnInit
    (EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!1c98!08/07/2014-16:19:00:: i INFO: Call to GetSystemPropertiesAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
       at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch()
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Using folder N:\WFSLR_JOE\MSRS11.WFSLR_JOE\Reporting Services\RSTempFiles for temporary files.
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 1 snapshots, 4 chunks, 0 running jobs, 0 persisted streams, 4 segments, 4 segment mappings, 0 edit sessions.
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch() ends

    Hi Joseph_SQL,
    The following operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications: Windows Server 2012 R2, Windows 8.1, Windows 8, Windows Server 2012, Windows Server 2008 R2, Windows 7, Windows Server
    2008 and Windows Vista.
    Because the noted operating systems limit permissions, members of the local Administrators group run most applications as if they are using the Standard User account. To avoid open Report Manager in Internet Explorer always using Run as administrator option,
    we can refer to the following configuration steps:
    Add Reporting Services URLs to trusted sites.
    Report Manager Folder Settings
    Report Manager Site Settings
    For more details about how to configure the settings, please refer to the following article:
    http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx. After finishing the configuration, we can re-open Report Manager in Internet Explorer without using
    Run as administrator.
    Hope this helps.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Does hplip actually require foomatic-db?

    Hi, I struggled for an hour to set up an HP Deskjet 3050 J610a connected via WiFi. I had hplip installed, but http://localhost:631/admin gave the cryptic message "Unable to get list of printer drivers: Success". Finally I ran `sudo pacman -Rdd foomatic-db` and was able to install the printer without any more trouble.
    So my question is: Does hplip actually require foomatic-db? If foomatic-db-engine is sufficient, foomatic-db should be removed from hplip's dependency list. In fact, it should probably be marked as a conflicting package.

    Enterprise manager still requires a static service definition in listener.ora and does not rely on dynamic registration.
    From documentation:
    The SID_LIST is required for backward compatibility with Oracle8 or Oracle7 databases, as well as external procedures and heterogeneous services, and some management tools, including Oracle Enterprise Manager.
    Werner

  • Does OC4J standalone require license fee in order to use in production env?

    Hi,
    Does OC4J standalone require license fee in order to use in production environment?
    Please advise.
    Thank you.

    Yes, you have to buy Oracle Application server in order to run it on a production enviroment.

  • Does Visual composer requires enterprise portal installation?

    Hi all,
    Does Visual composer requires enterprise portal installation?
    or can it be installed standalone and used standalone.
    Also does Visual composer reuires BI-JAVA stack,
    or can it run on BI-ABAP stack also
    Thanks all,
    Regards,
    Robert

    Hi ,
    Thx Markus,
    one more question...
    Is VC a stand alone application/package by itself that does not require EP or does it come with EP.
    Thanq.
    Regards,
    Robert.

  • Does CC 2014 require a new paid subscription or is it an update to an existing license?

    Does CC 2014 require a new paid subscription or is it an update to an existing license?

    If you are on a current and valid subscription, then it's simply a "free" update.
    Mylenium

  • 10.4.11 won't install after download "disk does not meet requirements"

    After successfully upgrading to 10.4.6, I was able to download (after three attempts) the upgrade to 10.4.11. When I went to install it, it said the volume I picked (the one the OS is on and just upgraded to Tiger) did not meet the requirements and had the red exclaimation point on it, as did all the other volumes. There is about 8.5 GB of free space on this volume. The upgrade was from the support website and was for the power PC, not the intel. What could be happening?

    Hi BDAqua,
    This is the only discussion that repeats the "disk does not meet requirements" message I'm getting. I downloaded the combo and get that message. These are my specs:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,2
    CPU Type: PowerPC 970 (2.2)
    Number Of CPUs: 1
    CPU Speed: 1.8 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 3 GB
    Bus Speed: 900 MHz
    But I can't seem to find any requirements documentation that explains why my PowerPC won't take this upgrade. It's my son's computer and one of his favorite games just raised its req's to 10.4.6. So I went hunting (software update gave me nothing) and found the combo. Any advice appreciated.

  • I have a G5 and bought and upgraded to osx 10.5.  now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

    i am trying to sync an ipad to a power mac g5.  i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message:  "you cannot install mac os x update on this volume.  this volume does not meet requirements for this update".  help!

    Mac OS X 10.5.8 Combo Update
    Java for Mac OS X 10.5 Update 5
    To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
    I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.2 or later recommended
    (free download from www.itunes.com/download)
    iTunes Store account
    Internet access
    I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

  • Can location services get disabled automatically? Or does it always require a user to disable it?

    Can location services get disabled automatically? Or does it always require a user to disable it?
    I was repeatedly trying to Find my iPhone  when it came up with "Location Services Disabled".
    Later I was able to find my iPhone again.  This has happend severally times lately?
    Cold this happen automatically, like a "time out" function?

    Can location services get disabled automatically? Or does it always require a user to disable it?
    I was repeatedly trying to Find my iPhone  when it came up with "Location Services Disabled".
    Later I was able to find my iPhone again.  This has happend severally times lately?
    Cold this happen automatically, like a "time out" function?

  • Does Access key required to implement explicit Enhancement point

    Hi All,
    Does Access key required to implement explicit Enhancement point in Function module or source code or etc.
    please clarify..
    thanks
    Bhanu

    Thanks for your reply Mr. Bala..
    I think i have not asked question correctly.. what i mean to ask is "to create the explicit enhancement point in the method(Source code), does ACCESS KEY required".
    Because when i tried to create enhancement point at IMPLICIT enhancement option system is allowing to create but when i tried to create at other than IMPLICIT enhancement option(in the mid of source code ) system is not allowed and displayed following message :
    "In this mode, you can create implementations only"
    waiting for your reply..
    Thanks
    Bhanu

Maybe you are looking for