Does PSE10 have an external API so that I can make my own addins to the organizer?

I need to extend the functionality of PSE10.
My most immediate need is to "merge" .NEF images and .JPG mages into a version set. This is a very tedious manual process in the current version.

Helgemor wrote:
I need to extend the functionality of PSE10.
My most immediate need is to "merge" .NEF images and .JPG mages into a version set. This is a very tedious manual process in the current version.
Wouldn't stacks work just as well? Stacks are a lot easier to create than version sets, and I'm told (haven't tried it myself) that you can autostack .NEF and JPG with reasonable success.

Similar Messages

Hello, my iPad's power button has stopped working. Does anyone have a solution as to how I can make it work again

Please help. My iPads power button has stopped working. I cannot take it to sleep mode or switch it off

Try a reset even though the Sleep/Wake button is not woring.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I am using itunes version11.1.3.8 and an iphone 4s version 7.0.4. Is there any way that I can create my own ringtones as I had done in the past? Thank you.

I am using itunes version11.1.3.8 and an iphone 4s version 7.0.4. Is there any way that I can make my own ringtones? I have always done so in the past (Android). I much prefer to hear my songs when someone calls. Thank you.

I have tried to follow all the steps correctly. I presently have on itunes 2 entries:
1. song.m4r with this highlighted on info screen but song location.m4a on summary screen. I have enetered "OK" several times.
2. song no suffix on info screen but song location .m4r.mp3 on summary screen
After syncing I then go a contact and edit it. Trying to change ringtone does not give me an option for the ringtone that I created only those that were preloaded. Is there something that I need to do here? The ringtone (at least one of them) does appear in my song list and I can play it. I don't know how to check for its properties on the iphone.
I do not have an itunes created entry on the sidebar for ringtones (I did create a playlist myself).

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
Connection Bus : USB                                                               Write Status : Read/Write
Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply!

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

Does the time capsule work as an external hard drive that you can access from multiple lapttops

I have a mac desktop, a macbook and a pc laptop. I also purchased the time capsule. Will that functional as an external hard drive that I can use to save a share documents between. Trying to figure out the best way to work on documents between devices. new to max and trying to make the full switch but still working with toshiba laptop for a while too.
Any help is appreciated.

Hello jhettenhausen,
Yes, it can function as an external drive for all the devices. As for Windows, you just need to make sure that
it is Windows Professional or XP, as they support mapped network drives. Windows 7 Home Premium doesn't is not capable of mapping network drives. At home, I have a ubuntu laptop, Windows 7 Profesional laptop, and Macbook Pro and they all backup to the Time Capsule 1 TB. Hope this helps!!
Best Regards,
freesparks

I am new to a MAC. I have an external hard drive that I used with my Windows XP computer. Can I reformat it

I am new to MAC. I have an external hard drive that I used with my former computer running Windows XP. Can I reformat it to use with my new MAC? If so, how do I do it?

Yes you can. See the following:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

HT4718 I have an external hard drive that I used as Time Machine Backup. I have not used it for a while and now, when I plug it in computer says: This disc is not readable. I want to recover the backups and not erase and reformat the disc. Thank you in

I have an external hard drive that I have used as Time Machine backup, but not for a while. Now when I plug it in, computer says this disc is not readable.
I want to keep the backups on it and not erase and start over.
Thank you in advance.
Gregor

It sounds like something went wrong with the drive. Did you drop it? How long has it been sitting around unused?

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

I have an Intel based iMac that has just developed two small spots on the screen. One 1/8" circle at bottom and a tiny circle at top. The fading on and off light isn't working anymore either. Does anyone know anything about this?

I have an Intel based iMac that has just developed two small spots on the screen - they look light brighter spots on the screen. One 1/8" circle at bottom right and a tiny circle at top right. The fading on and off light on area surrounding the screen isn't working anymore either. Has anyone else had similar problems? Any solutions? Thanks!

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I have an 2007 mac book pro that does not have a place for HDMI cable. Can you please tell which converter I need?

I have an 2007 mac book pro that does not have a place for HDMI cable. Can you please tell which converter I need?

You will need something such as this:
http://www.amazon.com/A-Sonic-HDMI-HD15-Male-Cable/dp/B001OLCHJ6
Ciao.
Note that this will only transmit video. If you need sound, the audio output port will have to be tapped.
Message was edited by: OGELTHORPE

I need a product similar to idvd so that I can make a dvd. It's for my mom and she does not have a computer. Help!, I need a product similar to idvd so that I can make a dvd. It's for my mom and she does not have a computer. Help!

I am looking for a product similar to edvd so that I can make a dvd to play on a dvd player to view on a regular TV. It's for my mom who doesn't have a computer. Can anyone help?

The current Apple thinking is that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that nothing could be further from the truth has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD.
You could also Roxio Toast.

Ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been

I installed SSRS on an existing instance. Configured SSRS using report manager, loaded some reports and they work as expected.
The problem is I can not launch(IE)  Report Manager UI due to error in description. I can launch the Report Manager IF I RUN IE AS ADMINISTRATOR. The details of error from SSRS log file listed below.
The main page SSRS page starts to display. The display starts with "Home | my subscriptions |site Settings..." in upper right side, and "SQL Server Reporting Services" in upper left. Then the error displays
User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient     permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
Starting IE as administrator starts the Report Manager with out problems.
Does anyone have suggestion, is more information needed? Thanks, Joe
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!1c98!08/07/2014-16:19:00:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch()
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Using folder N:\WFSLR_JOE\MSRS11.WFSLR_JOE\Reporting Services\RSTempFiles for temporary files.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 1 snapshots, 4 chunks, 0 running jobs, 0 persisted streams, 4 segments, 4 segment mappings, 0 edit sessions.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch() ends

Hi Joseph_SQL,
The following operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications: Windows Server 2012 R2, Windows 8.1, Windows 8, Windows Server 2012, Windows Server 2008 R2, Windows 7, Windows Server
2008 and Windows Vista.
Because the noted operating systems limit permissions, members of the local Administrators group run most applications as if they are using the Standard User account. To avoid open Report Manager in Internet Explorer always using Run as administrator option,
we can refer to the following configuration steps:
Add Reporting Services URLs to trusted sites.
Report Manager Folder Settings
Report Manager Site Settings
For more details about how to configure the settings, please refer to the following article:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx. After finishing the configuration, we can re-open Report Manager in Internet Explorer without using
Run as administrator.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Does PSE10 have an external API so that I can make my own addins to the organizer?

Similar Messages

Maybe you are looking for