Does putting the airport in bridge mode effect the security of the internal private network

If I put my Airport Extreme in bridge mode for running Echolink, will it effect the security of my internal private network?

Not at all.

Similar Messages

Port forwarding for Mac that shares internet to Airport in bridge mode?

I use Air Video server, which allows me to stream movies from my Mac to my iPhone or iPad. It sits on port 45631 and that's closed.
I recently moved from NYC to CO, and because of my cable modem not being compatible with my older Airport router, I must use my Mac Pro to forward my Internet service from one Ethernet port to another - so that my older Airport Extreme can then broadcast wirelessly.
Since I use the AirPort in bridge mode, and the Mac is forwarding the connection - how do I forward the port so Air Video can send through to the internet?
thanks for ANY help, I'm a bit lost here

I use Air Video server, which allows me to stream movies from my Mac to my iPhone or iPad. It sits on port 45631 and that's closed.
I recently moved from NYC to CO, and because of my cable modem not being compatible with my older Airport router, I must use my Mac Pro to forward my Internet service from one Ethernet port to another - so that my older Airport Extreme can then broadcast wirelessly.
Since I use the AirPort in bridge mode, and the Mac is forwarding the connection - how do I forward the port so Air Video can send through to the internet?
thanks for ANY help, I'm a bit lost here

Airport in Bridge mode "not a supported format." Are you F'n kidding me?

Forgive me if I'm freakin' a bit but I am at my wits end with Apple. Here's the breakdown.
Fiber DSL into a standard wired 4 port D-Link router. Router is connected to HP 24 port switch because the D-Link does not have enough ports for my house. Switch feeds cat5 to all rooms in the house. Airport Extreme (newest version) is in living room and set to Bridge mode. I use it to connect multiple items in my entertainment area and wireless access for the Macbooks and iPhones.
Up to a few weeks ago I was connecting my iMac via wireless but got sick of the connection dropping (pings would be unresponsive for minutes on end). I ended up moving my desk and plugging into a cat5 port on the wall. Well guess what... it's still dropping. OK, I removed everything from the network and started adding things one at a time over the past few days. Everything was running better than ever until I plugged the Airport back into the network. Mind you, I'm not running my iMac into the Airport, it is simply on the same network.
After shaking my head for a while I called Apple. Well I just got off the phone w/ Tier 3 tech support for the Airport Extremes. I tell them that I have no idea why, but I'm only dropping connections when the Airport is on the network and I'm just curious if there is something in the settings that I'm missing. This is where it gets good... The brilliant Tier 3 "Technician" tells me that I am running an unsupported configuration because the Airport is running in bridge mode and it's attached to a wired router across the house. He says that if the D-Link router was also wireless he could help me. I asked what the difference was if it was wired or wireless but all he could say was he couldn't help me because it was a unsupported configuration.
So - I'm ready to send all my CrApple gear to some poor kids on the other side of the world. Anyone have any ideas here?

Bob Timmons wrote:
I'm reading the original post with the understanding that the AirPort Extreme is connected by ethernet to the network and the replies indicate that as well.
Are you saying that if the Extreme is in bridge mode connected by ethernet that the ports are not active?
Not at all. What I was trying to say was that the connection from the Extreme to the internet must go through the WAN port, not a LAN port. In a large network, this can happen unintentionally. For instance, suppose a client has Internet sharing enabled and is connected wirelessly to the Extreme and by Ethernet to another router. Then the internet connection from the other router would be shared with the entire subnet, including the Extreme through its LAN port. This could cause problems with the network.
However, with the network setup Jerastan describes, this does not seem to be the cause.

Airport Extreme Bridge Mode Connection Drop

Hi everyone,
Hoping that someone will be able to help me. I have a one year old son who is now getting his hands into everything so a few weeks ago I decided to look at my options for networking my home iMac and External HD's.
I am currently running a SKY (Netgear router) into an Airport Extreme set up in Bridge mode. I have turned off the SSID of the SKY Router and everything connects to the Airport. On the AIrport I have a USB hub attached which then has three external HDs attached to it. I know this is a lot, but I have not had any issues at all with data transfer with this set up.
The issues I am having is that on average, once or twice a day the iMac will drop connection to the Airport. There is no patern to this as the iMac will drop connection while I have been working on the machine and also at times when it has been woken from sleep mode. There is then no physical way to restore the connection unless I restart the iMac. Even turning on/off airport does not fix the issue. If I try this, the iMac then seems to not be able to find any wirless networks, even those that are in the area of my home.
I have turn off the the airport and ran the iMac simply connecting to the SKY router and have experienced zero problems, the issue only happens when I introduce the Airport Extreme.
Does anyone know what might be causing the problem? I really need to try to get this to work so that I can eliminate the need to have the external hard drives attached physically to the iMac. In my home the router/Airport and drives are safely out of the way in a child proof area. I fear that if I have to introduce them back to being physically connected to the iMac they will no longer be safe from small hands!!!
Many thanks for any advice.
- Neil

Unfortunately, you did not not include information about the operating system that you will use to configure the AirPort Extreme, so we would need that you be able to provide you with the correct steps to set up the AirPort Extreme.
Bridge Mode would be the correct setting for the AirPort Extreme, but you will not have to worry about this if you use the setup "wizard" in AirPort Utility on your Mac or an iPhone / iPad since the wizard will automatically provide the correct settings for the AirPort Extreme.
I'm not clear though on whether you want the AirPort Extreme to provide another separate wireless network or extend the existing Arris network. If you plan to locate the AirPort Extreme a room or two away from the Arris, then it might make sense to extend the Arris network, so you will have one "big" network that provides greater range.
Whether or not the Arris will have NAT issues, we cannot say. This will be one of those times where you will not know whether something will work correctly until you try.
If you are not in a rush to get the AirPort Extreme configured, temporarily power off the Extreme and get things working with the Arris modem/router and your Xbox.

What is the difference between Bridge Mode and sharing a public ip address?

Hello,
I would like to understand this difference, in general terms, and also in the context of my setup:
I have an office inside a business center where we are assigned a fixed ip address per computer, and I don't know whether it is better to use bridge mode or to share a public ip address in order to use the benefits of the new time capsule: internet access, hard drive sharing, mobile me back to my mac? Back to my mac does not seem to be working and I get the message that I net a modem with NAT protocol bla bla bla...but I'm also not sure whether the problem is with the setup as the manufacturer claims the protocol is supported.
Thank you for the help

"...share a public ip address..." enables the DHCP/NAT service on the Time Capsule.
"...bridge mode..." disables the DHCP/NAT service on the Time Capsule.

HT201974 how do you change your airport to bridge mode

how do you change your airport to bridge mode?

See your other post. Please, do not double post on the support forums, as it makes things very confusing.

I bought the Airport Extreme because I thought it would increase the range of the WiFi signal in my house. I have a DSL modem (also Wifi) and there are parts of the house that do not seem to have a strong Wifi signal.

I bought the Airport Extreme because I thought it would increase the range of the WiFi signal in my house. I have a DSL modem (also Wifi) and there are parts of the house that do not seem to have a strong Wifi signal. The Airport Extreme does not seem to be increasing my Wifi signal strength? Any thoughts on what I could be doing wrong? I am able to connect to it, etc. Just thought the strength would be better.

The broadcast power of all wireless routers and devices is limited by law.....and all manufacturers run their routers full blast.....so the relative signal strength of wireless routers from one manufacturer to another will tend to be remarkably similar.....despite the fancy advertising claims.
You may want to consider adding another AirPort Extreme to "extend" the signal strength in your home. If you decide to do this, the "extending" Extreme would normally need to be located at a point that is approximately half the distance from your "main" AirPort Extreme and the general area that needs more wireless coverage.

I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

Before I bought it I did the same question at the Apple Store, and they told me "You can extend your existing Wi-Fi Signal with Airport Express wireless...
You cannot extend wireless from any brand except another apple router.. the store might have assumed you were using an apple main router. Most people who buy express buy them to extend an extreme or time capsule.
You are correct .. in the setup documents it does say 5.6.1 is adequate to do the setup.. my bad.. !!

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

Can the AirPort Extreme Base Station be plug-in to the power forever?

Hi,
sorry for my english but this is my question: Can the AirPort Extreme Base Station be plug-in to the power (electricity) forever? I mean, I don't have to un-plug the Base Station sometimes? Thanks
Alvaro

Sounds more like an issue with your router and
network than a problem with AEBS.
Which router?
I certainly do not need to reboot my AEBS like that,
I think I have rebooted it once in two years!
I would start a new thread describing your network in
more detail and the issues with the AEBS.
Thank you, but my diagnosis is the result of many days
of experiment with about hundreds of users. It's a bug,
I know were it is. It was reported to Apple in september
(2005).
It isn't that easy to upgrade at the same time all the
wireless (802.11b and 802.11g) that do have to interoperate
smoothly within the same space.
I don't think anyone need to waste more time on these
bugged firmware versions (5.6 & 5.7) as I already explained
it. They work smoothly just in a limited environment
which they were conceived for: one Mac connected to one
AEBS connected to one FAI.
You can't recommand these version to colleagues who have
to live in a real world with other wireless equipment
(a Mac not updated, an ABS not updated,
a Cisco wireless card emitting to 100 mW and smashing all
the neibourhood, a pre 802.11g+ card using 2 channels at
the same time...).
dan

Why does the computer lock up while I am securely emptying the trash?

Why does the computer lock up while I am securely emptying the trash?

Select  ▹ Force Quit... from the menu bar, then select Finder and press return. From the Finder menu bar, select Finder ▹ Preferences ▹ Advanced and uncheck the box labeled Empty Trash securely. Try again to empty the Trash. If you still have problems, follow the instructions in this support article:
You can't empty the Trash or move a file to the Trash

I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
If your existing router is not an Apple AirPort Base Station, the Express:
can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

My iPad 3 will not change the orientation to landscape mode. I have checked the orientation switch and turned it off for a reset neither of which fixes the problem.

My iPad 3 will not change the orientation to landscape mode. I have checked the orientation switch and turned off for a reset. Neither fixes the problem. What can I do?

Is it lock in the Control Center? (tap to enlarge)

Airport in bridge mode not working in Windows7

Hi everyone,
Last night as I was browsing the web on my iPad the internet stopped working...I am using an Airport Express router plugged directly into the wall socket of my apartment which was configured by the ISP.
I have been using this config for the past 7 months with no issues but last night it just stopped working and the yellow indicator started flashing.
I went into Airport utility and it tells me the Double NAT problem has been found (maybe the ISP changed something?)...and they suggest to change the Airport configuration to Bridge Mode ... said and done...now the Internet works fine under OSX and on my iPad but it does not work anymore in Windows 7.
Some of my family uses Windows 7 for some very specific apps and now it's just dead, internet does not work anymore.
Also, in OSX / iOS I didn't make any changes, I just changed the Airport configuration to Bridge mode and it worked right off the bat.
Has anybody else confronted such problems before ? If so, what would be the best way to fix this ?
Thanks!

" I tried trunk port also but it got disabled" <----- if your L2 config is not correct, nothing will work.
What is the setup on the switch ? Trunk or access vlan ?
What is the status of the interface ? up ? down ?
Do you see something in your arp table ?
Gilles.

ACE30-MOD-k9 in bridge mode. Individual server in the same vlan of Real Servers not reacheable.

I configured ACE30-MOD-K9 in bridge mode and I configured a server farm with his real servers. The traffic passes and is balanced correctly between all RSERVER. But I can not contact a server that is on the same vlan of the serverpharm but doesn't belong at this serverfarm.
I Thought that the traffic directed to this "spare" server shouldn't be balanced but the bridge should permit traffic to pass. (trasperent mode) Is it correct ?
What does ACE in bridge mode with traffic directed to servers that do not belong to any server farm but are present on the same VLAN (same bridge group)?
In rispect at the following configuration 10.10.10.168 isn't reacheable
access-list INBOUND line 8 extended permit ip any any
access-list INBOUND line 16 extended permit icmp any any
probe http HTTP_PROBE1
expect status 200 200
rserver host RS_WEB1
ip address 10.10.10.163
inservice
rserver host RS_WEB2
ip address 10.10.10.164
inservice
rserver host RS_WEB3
ip address 10.10.10.165
inservice
rserver host RS_WEB4
ip address 10.10.10.167
inservice
serverfarm host SF_FIREGROUP
rserver RS_WEB1
    inservice
rserver RS_WEB2
    inservice
rserver RS_WEB3
    inservice
rserver RS_WEB4
    inservice
sticky ip-netmask 255.255.255.255 address source sticky-ip
replicate sticky
serverfarm SF_FIREGROUP
sticky http-cookie myCookie sticky-cookie
cookie insert browser-expire
serverfarm SF_FIREGROUP
class-map match-any VS_FIREGROUP
2 match virtual-address 10.10.10.169 tcp eq www
4 match virtual-address 10.10.10.169 tcp eq 8081
5 match virtual-address 10.10.10.169 tcp eq 8082
6 match virtual-address 10.10.10.169 tcp eq 8083
7 match virtual-address 10.10.10.169 tcp eq 8084
8 match virtual-address 10.10.10.169 tcp eq 8085
9 match virtual-address 10.10.10.169 tcp eq 8097
class-map match-any VS_FIREGROUP_HTTPS
2 match virtual-address 10.10.10.169 tcp eq https
policy-map type loadbalance first-match HTTP
class class-default
    sticky-serverfarm sticky-cookie
policy-map type loadbalance first-match HTTPS
class class-default
    sticky-serverfarm sticky-ip
policy-map multi-match HTTP_HTTPS_MULTI_MATCH
class VS_FIREGROUP
    loadbalance vip inservice
    loadbalance policy HTTP
    loadbalance vip advertise active
class VS_FIREGROUP_HTTPS
    loadbalance vip inservice
    loadbalance policy HTTPS
    loadbalance vip advertise active
interface vlan 4
bridge-group 1
access-group input INBOUND
service-policy input HTTP_HTTPS_MULTI_MATCH
no shutdown
interface vlan 700
bridge-group 1
access-group input INBOUND
no shutdown
interface bvi 1
ip address 10.10.10.150 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 10.10.10.1
Thanks a lot
Francesco

Hi Francesco,
Just to add more a bit, A bridge group is very similar to routed mode except ACE cannot NAT pass through traffic, vlan's cannot be shared and couple of other things but client's should be able to access the server as in before.
But also whether in bridge or routed mode, ACE does create flows and applies other security parameters if configured to the traffic. This is for security. Also, ACE should know the MAC of the device to forward the traffic to. Can you check if ACE has the MAC of the destination? You can also put a route for testing purpose and see if that resolves the issue. That should probably be the quickest way to check if ACE is creating any issue here.
Regards,
Kanwal

Does putting the airport in bridge mode effect the security of the internal private network

Similar Messages

Maybe you are looking for