Does QPM 4.1 support Named ACLs

Could any help with this, i downloaded a trial version of QPM and i am trying to import a QoS policy from our switches and its failing as the ACLs used for classification on the switches are Named ACLs. Does QPM support Named ACLs or not?

A lot of it stems from the large and complex nature of the models we employ. Hardly a week goes by that we don't grind to a halt due to a bug in jpox. That then leeds to the thorny problem of trying to discuss the problem on the jpox forums, where there are basically only two members that know the product well enough to help... Net result, they are overwhelmed, and from one of them it comes across in the rudeness of replies. This puts people off, including us.
I contrast this with the Hibernate and Spring communities, which I have personally been involved with and found to be both thriving and rewarding.
A bit of QA and respecteful support will be wonderfull. We are happy to pay a company for that because of the man hours it saves. I sincerely hope that Kodo JDO works out for us.

Similar Messages

Named ACL and ACE numbering

I created a new extended named ACL and enter a few ACEs numbered 10,20,30,100,110,1000 to give them plenty of space apart. When I reload the switch, the numbering has disappeared and they are all spaced 10 apart. Why does this happen and is there a way to maintain larger spaces? I am thinking that in time I may come to make many modifications to the ACL and the gap between two entries may reduce to nothing. I am not going to reload my switch just to reset the gaps and I would rather not remove the ACL completely and replace it to achieve the same.
thanks for any advice
Chris

The ACL is stored in RAM initially. When you display your access-list for instance you see the seqeunce numbers. When you display your're running configuration you don't see them.
Are you using ip access-list or the traditional access-list?
ip access-list extended Popey
10 permit ip host 10.10.10.10 any
100 permit ip 10.10.20.0 0.0.0.255 any
1000 deny ip any any

Does access manager only support uid as rdn?

I am deploying 2005q4 access manager and my directory does not use uid as the rdn for user entries. Does access manager only support uid as the rdn in user entries? I am trying to test JES with mail and calendar etc and trying to figure out how to use my data design.

no, it can support any attribute for the naming attribute. For LDAP authentication there are usually two directories involved: the LDAP server where authentication occurs and the LDAP server where user profiles are stored.
If you only need to authenticate against an LDAP server where the RDN is not uid (for AD is samaccountname), you simply need to change the naming attribute in the LDAP authentication module
if you the LDAP server where user profiles is stored does not use UID, you may have a little more work on your hands. If you are using AM 7 in realm mode you simply need to create a new LDAPv3 user store configured for your needs. If you are using AM 7 in legacy mode or < AM 7 you will need to modify the DAI service and quite possibly the amUser and amConsole services.

Does the 6600GT-VTD128 support video capture?

Hi,
I recently purchased an MSI 6600GT-VTD128 video card. The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in. However, I haven't been able to get any video capture to work.
Does the card actually support this functionality? If not, what are the video input connections for? If so, is there some documentation as to how to set it up?
So far, I tried installing the video capture drivers that come with the card. I checked the manual. I checked the MSI web site FAQs. And I searched the forums.
Any help would be greatly appreciated.
Thanks,
Daniel

Thanks Richard. Yes I do have a breakout cable like that. Actually, I described it in my original message. So, I am guessing from your message that you believe that the card should have the capability to capture video.
In my original message, I asked if there was any documentation on setting up the card for video capture. The manual does not describe the procedure, nor does the MSI web site.
There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them. In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
If anyone out there has successfully used this card for video capture, please let me know.

HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

Start here... http://www.apple.com/support/iphone/assistant/itunes/

Does Photoshop CC not support touch on Windows 8.1 tablet?

Does Photoshop CC not support touch on Windows 8.1 tablet? Stylus nor finger working on canvas. Have all the updates from Windows and Adobe.

Photoshop does not have touch support. however some touch devices drivers have features the can be set to Photoshop Functions. For example
Tablets that have drivers that use Wintab API for pen support can be used with Photoshop Brush Pen support. Tablets that use Microsoft Ink API for pen support can not be used with Photoshop for Adobe does not have support for Microsoft INK API for Adobe states the INK API lack features used by Photoshop Brush engine.

Does Sender Mail Adapter support "PayloadZipBean" module

Hi everyone,
I have a scenario where, I get the email with an zip file as an attachment and I need to extract this file and send across. There is no mapping transformation done here, only I need to forward the attached file to the file server.
Zip file always contains 1 file and is a text file.
so Its an Email to File Scenario.
Can I send the zip file as it is without unzipping i.e., send the attachment as iit is to the file server?
If I want to unzip the file, does the module "PayloadZipBean" support in case of sender mail adapter. ?
Thanks,
Varun

Hi Varun,
Use "PayloadZipBean " Module at Receiver Communication Channel in the Module Tab Set the "Module Key.mode = unzip"
and Receiver communication Channel file should be "FileName.txt".
http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
Regards,
Naga.

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

CMP : Table does not have a column named ...

Hello All,
The following error is generated while verifying CMP bean before deployment with asant tool.
The table and field are present in the database, is there any way to debug whats wrong?
Error:
The table XYZ does not have a column named ABC
Test Name : tests.ejb.ias.cmpmapping.ASSunCmpMappingTest
Test Assertion :
Test Description : FAILED [JDO-GEN-CMP-Validation] : Unexpected exception occured while initializing JDOCodeGenerator, for the mapping file [ META-INF/sun-cmp-mappings.xml ], of the ejb archive [ SchemeEJB ] .Check stacktrace for details :
[ java.lang.RuntimeException: The table XYZ does not have a column named ABC[/b]
The following error is reported. But in reality there is a column name(ABC) in the table(XYZ).
Thanx in Advance
Rgds,
Girish.
Here is the cmp-mapping.xml we are using
<sun-cmp-mappings>
<sun-cmp-mapping>
<schema>SchemeEJB</schema>
<entity-mapping>
<ejb-name>SchemeEJB</ejb-name>
<table-name>SCHEMES</table-name>
<cmp-field-mapping>
<field-name>schemeDeptCode</field-name>
<column-name>SC_DEPT_CODE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeCode</field-name>
<column-name>WF_SCHEME_CODE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeEnName</field-name>
<column-name>EN_NAME</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeUcdName</field-name>
<column-name>UCD_NAME</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeStartDate</field-name>
<column-name>START_DATE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>schemeEndDate</field-name>
<column-name>END_DATE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>isActive</field-name>
<column-name>IS_ACTIVE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>enShortDescription</field-name>
<column-name>EN_SHORT_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>enLongDescription</field-name>
<column-name>EN_LONG_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>ucdShortDescription</field-name>
<column-name>UCD_SHORT_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>ucdLongDescription</field-name>
<column-name>UND_LONG_DESC</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>sponsererCode</field-name>
<column-name>SPONSERER</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>userId</field-name>
<column-name>WS_USER_ID</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>createdDate</field-name>
<column-name>WS_CREATED_DATE</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>lastModified</field-name>
<column-name>WS_LAST_MODIFIED</column-name>
</cmp-field-mapping>
</entity-mapping>
</sun-cmp-mapping>
</sun-cmp-mappings>

This is almost always the case when using CMP and the schema hasn't been updated after adding the new column to the database. This has happened to me multiple times in the past month.
I'm referring to the <schema> element under the <sun-cmp-mapping> element in the sun-cmp-mappings.xml deployment descriptor that's generated from the capture-schema utility.
I'm 99% certain this is what you're encountering.

Does K8D Master-FT support Dual core Opteron?

Hi,
Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
Thx, Xuekun

Sorry I only looked after his question.
The entire K8D-Master3 series has support for it: >>Link<<

Does Toshiba Multimedia Center support 5.1 via optical out?

Hello, I have a question before I buy this...
Does Toshiba Multimedia Center support 5.1 via optical out?
I can find this out anywhere they only mention digital out but that could be coax.
Can any of you help me?
Thanks

Hi
As far as I know the Toshiba Media Center supports these feature:
Dolby Digital Surround, Dolby Digital 5.1, EAX ADVANCED HD
_Ports:_
1 x LAN - RJ-45
4 x hi-speed USB - USB Typ A, 4-polig
1 x audio *SPDIF output*
1 x audio - line-In stereo port 3.5 mm
1 x headphones audio output stereo port 3.5 mm
Greats

Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?

Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
If not, is this an option under consideration?

billqaz a écrit:
Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
If not, is this an option under consideration?
It's the default sort order. You can choose chronological order( ascending or descending) or by Import batch or by filename. Contrary to older versions, those sort orders are available not only in thumbnail view, but also in Folders view and albums. In albums you can sort as you like 'custom order'. No difference in Mac or Win.

Does Final Cut Express support ProRes 1080p?

Does Final Cut Express support ProRes 1080p?

Hi(Bonjour)!
ProRes codecs was introduced with Final Cut Studio 2.
You can't create a ProRes sequence in FCE, but if you've installed the +Apple ProRes QuickTime Decoder 1.0 for Mac+ you will be able to import ProRes footage, but rendering or conversion will be needed.
http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
Michel Boissonneault

Why the f**** does ios6. Not support YouTube on iPad 2? This is ridiculous if I would have known I would've never updated... I'm livid

Why the f**** does ios6. Not support YouTube on iPad 2? This is ridiculous if I would have known I would've never updated... I'm livid

YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

Does QPM 4.1 support Named ACLs

Similar Messages

Maybe you are looking for