Does QT no longer support embedded XML (text3GTrack) captions?

I used to be able to open XML files in QT, copy them and add them as captions in QT Pro as an embedded text track. This no longer seems to work. When I try to open the XML file it says that it is not a movie file. These same files used to work, so I know it's not the files themselves. The files are "text3GTrack" type="application/x-quicktime-tx3g". Did QT stop supporting XML caption files?

There was a problem with the language code. I had "en" instead of "eng" after messing with the language code trying to get another language to work. I found the list of language codes here:
http://www.loc.gov/standards/iso639-2/php/code_list.php
They need to be 3 character as opposed to 2.
Message was edited by: Patrick Besong

Similar Messages

Does Kodo 4.1 support embedded with the owner-field attribute?

Does Kodo 4.1 support embedded with the owner-field attribute?
My investigations so far say no, that it is infact ignored. This is a very serious problem for the project I am working on.
Please proove me wrong...

A lot of it stems from the large and complex nature of the models we employ. Hardly a week goes by that we don't grind to a halt due to a bug in jpox. That then leeds to the thorny problem of trying to discuss the problem on the jpox forums, where there are basically only two members that know the product well enough to help... Net result, they are overwhelmed, and from one of them it comes across in the rudeness of replies. This puts people off, including us.
I contrast this with the Hibernate and Spring communities, which I have personally been involved with and found to be both thriving and rewarding.
A bit of QA and respecteful support will be wonderfull. We are happy to pay a company for that because of the man hours it saves. I sincerely hope that Kodo JDO works out for us.

Does iTunes no longer support older iPods?

Does anyone know if Apple has discontinued support for older ipods (in my case, a 2nd gen classic, 20gb, released in 2002). ITunes will no longer recognize this ipod since iTunes ver10.6. I thought maybe iTunes 11 would fix it, but it has not. This is on a mac mini, 2009 edition. I then tried it on a PC laptop which still has iTunes 10.5, and the ipod was recognized.
I don't use the old ipod much, but I would still like to change the music on it from time to time.
Any insight would be appreciated.

Huh. I just downloaded iTunes 11 a couple days ago, and my iPod (a 2nd generation iPod nano, 4 GB) still works. I think it should work.
What I did, is I had my iPod connected back when I converted from like, iTunes 10.5 to iTunes 10.6, I think maybe the iTunes can then be recognized? I know when I had iTunes 9.(something...), and I tried connecting to a computer with 10.9 (I think. well, one of those), it wouldn't work. So maybe, you have to go step by step? Although my iPod wasn't connected when I was upgrading to iTunes 11, so that's just a theory.
Try going on the PC laptop and then keeping your iPod connected when upgrading to iTunes 10.6, see if that works

Does imovie no longer support formatting to iDVD

Apparently the newest version of iMOVIE does not let you export to iDVD. Anyone know how to format iMOVIE videos for DVDs?

You can't create chapter markers but you can still burn a dvd if you have iDVD. See for example:
https://discussions.apple.com/message/24042948#24042948
Geoff.

Does quicktime no longer support skins?

tried creating a skinned movie -- quicktime doesn't recognize the files. when did this stop? I can open old skinned movie experiments just fine. anybody know what happened?

thanks for your interest, QTKirk -- but opening them isn't my problem --
when i create the xml/plaintext file and save it as a ".mov" to incorporate all the various elements, QuickTime won't read the saved file like it used to; says it's not a valid movie file and cannot be opened, whereas before it would open this great, odd-shaped movie however you planned it to look and operate, and then let you save it as a self-contained movie which was, then, all good-to-go -- anyone could open it.
now, no more....
BTW, I'm running OS 10.5.8 Leopard and QuickTime Pro 7.6.9 on a Dual 2 PowerMac G5 with 4GB RAM and 3 TB HDD space

Does skype no longer support ZOOM

http://www.zoomtel.com/products/voip_products.html
I've been using this and recently, I can call out but the party on the other end can now not hear me anymore. If they call me they can but not when I call out. The took place after the last update. Now I have to use a headset with mic at the computer and can't use my cordless anymore. HELP!! I want to use my cordless again.

Huh. I just downloaded iTunes 11 a couple days ago, and my iPod (a 2nd generation iPod nano, 4 GB) still works. I think it should work.
What I did, is I had my iPod connected back when I converted from like, iTunes 10.5 to iTunes 10.6, I think maybe the iTunes can then be recognized? I know when I had iTunes 9.(something...), and I tried connecting to a computer with 10.9 (I think. well, one of those), it wouldn't work. So maybe, you have to go step by step? Although my iPod wasn't connected when I was upgrading to iTunes 11, so that's just a theory.
Try going on the PC laptop and then keeping your iPod connected when upgrading to iTunes 10.6, see if that works

5th generation ipod games no longer supported???

I have a 60 GB 5th generation iPod video. I had a hard drive crash and lost all of the games that I had downloaded from the itunes store. Now, iTunes has restored all of my purchased items, but my 5th generation games don't seem to have appeared during the download. And, when I go to the app store, I can't even seem to find the games available for download anymore. Does iTunes no longer support games for the 5th generation iPod????

Hover the mouse over Apps, click the triangle which appears, and choose iPod Click Wheel games.
(47717)

What does this message mean: "power pc applications are no longer supported"?

What does this message mean: you can not start because power pc applications are no longer supported?

Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

TS1591 my classic iPod no longer appears in iTunes window when connected to iMac. does this mean my device is no longer supported by iTunes? or incompatible with OSX?

my classic iPod no longer appears in iTunes window when connected to iMac. does this mean my device is no longer supported by iTunes? or incompatible with OSX?

Hello stiannac
Check out the article below for troubleshooting to get your iPod showing back up on your iMac
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I upgraded to mountain lion from snow leopard, now my photo studio software is no longer supported by powerpc. Does anyone know of a fix so my photostudio will work?

I upgraded to mountain lion from snow leopard, but now some of my applications do not work, most specifically I would like to use my photo studio, but now it tells me that powerpc is no longer supported. Does anyone have any fixes to this problem? I would really like to continue to use software that I already have! Thank you for your help!

PPC software will not work in Mountain Lion because there is no longer any Rosetta emulator. You will only be able to run your older software by creating another partition on your hard drive on which you can install Snow Leopard. It need not be a large partition since you can still keep your files and programs on the main partition. You could also install Snow Leopard on an external drive from which to boot the computer.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
After you create the new partition boot the computer from your Snow Leopard DVD and install Snow Leopard onto the new partition.

I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.

I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported. What does this mean, and how do I get back all my photos and fix this? thanks.

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know some details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is you library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone

I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone know where I can go for help?

You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Does XDB supports validating xml against multiple schemas?

The XMLType has some methods for validating an xml documents against a schema, e.g., SCHEMAVALIDATE, etc.. does XDB support validating xml against multiple schemas (Just like what JAXP or Xerces have done)? Or what's the current situation about this issue? thanks.

did you try using the import schema element instead of the include elemnt?

Now that Apple no longer supports AppleWorks, how can I change a lot of AppleWorks files to Pages, without doing them one at at time?

Now that Apple no longer supports AppleWorks, how can I change a lot of AppleWorks files to Pages, without doing them one at at time?

Maybe these?
https://discussions.apple.com/thread/3162022?start=0&tstart=0
http://macscripter.net/viewtopic.php?id=19987
But why if you're running 10.6 do you need to do this? AW works fine in 10.6 with Rosetta.
(BTW, you're in the older iMac PPC forum.)

I've attempted to download Illustrator, but the message is that Adobe no longer supports the system on my computer. What do I do? Is there a way to receive an older version that does download on my system?

I've attempted to download Illustrator, but the message is that Adobe no longer supports the system on my computer. What do I do? Is there a way to receive an older version that does download on my system?

Without knowing anything about your computer we can't advise specifically. You can download CS6 versions in CC by checking the "older versions/ other versions" stuff in teh bottom section of the CC app's "Apps" tab, but that may not resolve your issues.
Mylenium

Does QT no longer support embedded XML (text3GTrack) captions?

Similar Messages

Maybe you are looking for