Does Reader for iPad store PDF files for viewing later when offline?

Does Reader for iPad store PDF files for viewing later when offline?
I'm asking because I have my portfolio as a PDF and I want to take my iPad with me to interviews, where I won't have Internet access, to show my portfolio.
Cheers,
Matt.

Awesome, I had hoped adobe were on the ball with this, but it's worth finding out beforehand.
Thanks!

Similar Messages

  • Why is there not a selection for 2-sided pdf files for the dj 3052a?

    my op system is Windows XP

    Hi comeonman,
    Automatic two sided printing is not supported by your printer, however you may be able to do it Manually.
    The instructions below were provided by ShlomiL in this post
    Here  is a link to manual duplex instructions by using the odd / even method. The instructions are for Mac OS but should be somewhat similar for your windows XP.
    Also you may use the Two Sided Printing Software
    http://ftp.hp.com/pub/softlib/software12/COL35975/mp-88750-2/HP_Two-sided_Printing.dmg
    you can access this tool by clicking the PDF button at the bottom of the print dialog, then select Two-Sided Printing and follow the on-screen instructions.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Problem opening PDF files for Adobe Reader

    Problem opening PDF files for Adobe Reader.
    I installed the latest adobe reader for my Mac. Everything is set up. Every time i go to open a pdf file, this shows up...
    "Before viewing PDF documents in this browser you must launch adobe reader and accept the End User Licence Agreement, then quit and relaunch the browser."
    I installed it through the adobe reader website for free. And even though it says 'by clicking "install now" you are agreeing to accept the user licence agreement terms and conditions' it still says i need to accept the T&C's.
    I've tried uninstalling and reinstalling it and same thing over and over again.
    Can someone help!?!?!
    Please contact me via email direct ASAP at....
    [email protected]
    Thank you
    Message was edited by: nick khzouz

    Adobe Reader PDF problems wrote:
    "Before viewing PDF documents in this browser you must launch adobe reader and accept the End User Licence Agreement, then quit and relaunch the browser."
    Did you actually try doing what the message suggests?  Open Adobe Reader and accept the EULA?

  • I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format not supported for conversion to PDF".  They already are pdfs, what am I doing wrong?".

    I purchased the Adobe pdf Pack to combine 50 PDF files to one and when I select them from my folder it claims "the files are not in a format supported for conversion to PDF".  They already are pdfs, what am I doing wrong?

    Moved to Adobe PDF Pack (read only)

  • Can I obtain a CD-ROM with the latest revision of Adobe Reader for a Windows XP system w/ Service Pack 3. I do not want to go online with this system. I have dedicated it to read all of my PDF Files only.

    I have 4 computer systems, 2 of which run under Windows XP w/ Service Pack 3. I have dedicated these systems to the task of reading all of my PDF Files which I have collected from my recent college career. The desktop system I want to use is an old Dell Optiplex GX240 with Acrobat Reader 4.0. The other Windows XP system I have is an old HP Laptop with Adobe Reader 8.1.4 installed. I want to update both systems to the latest version that is available for Windows XP w/Service Pack 3 installed. So, because I do not want to place these system online, would it be possible for me to obtain a copy of the Adobe Reader software I need on a CD-ROM? - Ken DeWitt, a 68-Year-Young Vietnam Veteran and recent college graduate...Summa Cum Laude.

    You can use an in-line computer to download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/

  • I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway inst

    I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the  PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and  it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • Adobe Reader can not open thousands of vital PDF files for the company I work for.

    Adobe Reader can open every PDF file on our server except for the many files that were received by one company. The coding is corrupt and I have not found a solution yet on how to decode it in order for it to open properly.
    I have looked into using uudecode but the online service it provided didn't seem to recognize the code I was putting in.
    The coding to these PDF files looks like this: 
    From what I have seen all of the working files are much shorter and the coding is a lot more organized and starts with %PDF
    If anyone can help me decode it or somehow restore it without receiving the file from the original sender, that would be ideal. Any other suggestions are much appreciated.
    Thank you!

    Your analysis is good. All working PDFs will start %PDF. These files may be
    * encoded
    * compressed
    * damaged in transit
    * destroyed by malware
    * not a PDF but mislabelled
    The format is certainly not uuencode/uudecode nor anything I've seen before. I think you need to contact the senders. If they say there isn't a problem, send a file back and ask if it works for them, because that will check for damage etc. If they CAN open it, they have some special tools or procedures and need to share them with you.

  • Adobe Reader hangs after opening a PDF file for a minuet

    Adobe Reader hangs after opening a PDF file for a minuet

    Pat. Thanks for your promote reply. I have resolved the issue.
    Closing the tools pane at the right side:
    open Adobe Reader without opening a PDF file
    collapse 'Tools' pane
    then open some PDF
    It shouldn't hang anymore

  • Using PDF files for items rather than .png.

    Hi there
    We have been looking into improving iBook production. We have a few books that feature elements that are comprise of a background image with text over the top. As the text isn't in an iPad-friendly font (I.e. not in iOS) and it doesn't have to be searchable. Previously, the items have been produced individually either in Illustrator or Photoshop. The main 'problem' with this is the plethora of file it creates, and the huge amount to time taken to apply style changes across all the separate items, save, re-import into iBA, and re-apply all the iBA-specific attributes.
    In an effort to speed up production somewhat, we have been trying to create these items in InDesign, using style sheets etc to give standardised appearance across all the items, and then drag and drop into iBA. The advantage is that all the separate items are in one document, and all style changes can be instantly applied to all items instantaneously, saving time, space, and effort.
    It places them as PDFs, and after unzipping the .iba file, the PDFs look fine, with pin-sharp text (as you'd expect, as PDF text would be vector data. Similarly, when you zoom in to the items in iBA, the text is still pin-sharp.
    However, once the iBA is previewed on a iPad, the text goes a little blurry. As one of the fonts is a dot-matrix-type font, the effect is noticeable - all the dots blur together into a line.
    Does anyone have any idea as to what is happening to the PDF between iBA and the iPad? Does it rasterise it at some point?

    Hi Ken
    'What leads me think it would?', well the fact that it worked, and looks ok. The iBook previews fine and works fine on the iPad.
    We initially came up with the idea when we 'unzipped' an .iba file (you know, changing the .iba extension to .zip, then unarchiving the contents), and found that iBA itself had created .pdf files for the full-screen photos which appeared rotated and shadowed on the iPad page, but were viewed as straight, unshadowed, images. (the rotated version was the iBA-created PDF file, the full-screen was the original .jpg we pulled into iBA). Naturally, we were surprised. So we started mucking about, and found that drag/drop from ID worked, and looked OK.
    As an update to my original post, it appears that the difference in quality was due to the fonts used. Once we opened the .PDFs within the .iba file, we converted the text to outlines, resaved the .pdfs, changed the unzipped folder back to an .iba file, and the font now looks great.
    BTW, Is it me, or were you being snippy?

  • Can I read and search a PDF file on my IPAD

    Can I read and search a PDF file on my IPAD??

    Several apps will allow you to work with PDFs. iBooks will handle them, but there have been a few issues reported about using it for that purpose. My guess is it depends on the size and complexity of the file. Adobe has a reader in teh app store (free). Goodreader is an option, and provides functionality for searches.

  • Need to generate a Index xml file for corresponding Report PDF file.

    Need to generate a Index xml file for corresponding Report PDF file.
    Currently in fusion we are generating a pdf file using given Rtf template and dataModal source through Ess BIPJobType.xml .
    This is generating pdf successfully.
    As per requirement from Oracle GSI team, they need index xml file of corresponding generated pdf file for their own business scenario.
    Please see the following attached sample file .
    PDf file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/BPA_Print_Trx-_output.pdf
    Index file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/o39861053.out.idx.txt
    In R12 ,
         We are doing this through java API call to FOProcessor and build the pdf. Here is sample snapshot :
         xmlStream = PrintInvoiceThread.generateXML(pCpContext, logFile, outFile, dbCon, list, aLog, debugFlag);
         OADocumentProcessor docProc = new OADocumentProcessor(xmlStream, tmpDir);
         docProc.process();
         PrintInvoiceThread :
              out.println("<?xml version=\"1.0\" encoding=\"UTF-8\" ?>");
                   out.print("<xapi:requestset ");
                   out.println("<xapi:filesystem output=\"" + outFile.getFileName() + "\"/>");
                   out.println("<xapi:indexfile output=\"" + outFile.getFileName() + ".idx\">");
                   out.println(" <totalpages>${VAR_TOTAL_PAGES}</totalpages>");
                   out.println(" <totaldocuments>${VAR_TOTAL_DOCS}</totaldocuments>");
                   out.println("</xapi:indexfile>");
                   out.println("<xapi:document output-type=\"pdf\">");
    out.println("<xapi:customcontents>");
    XMLDocument idxDoc = new XMLDocument();
    idxDoc.setEncoding("UTF-8");
    ((XMLElement)(generator.buildIndexItems(idxDoc, am, row)).getDocumentElement()).print(out);
    idxDoc = null;
    out.println("</xapi:customcontents>");
         In r12 we have a privilege to use page number variable through oracle.apps.xdo.batch.ControlFile
              public static final String VAR_BEGIN_PAGE = "${VAR_BEGIN_PAGE}";
              public static final String VAR_END_PAGE = "${VAR_END_PAGE}";
              public static final String VAR_TOTAL_DOCS = "${VAR_TOTAL_DOCS}";
              public static final String VAR_TOTAL_PAGES = "${VAR_TOTAL_PAGES}";
    Is there any similar java library which do the same thing in fusion .
    Note: I checked in the BIP doc http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/javaapis.htm#CIHHDDEH
              Section 7.11.3.2 Invoking Processors with InputStream .
    But this is not helping much to me. Is there any other document/view-let which covers these thing .
    Appreciate any help/suggestions.
    -anjani prasad
    I have attached these java file in kixs : https://kix.oraclecorp.com/KIX/display.php?labelId=3755&articleId=354962
    PrintInvoiceThread
    InvoiceXmlBuilder
    Control.java

    You can find the steps here.
    http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
    http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

  • I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    Hello waitingone,
    please try this (all terms are translated from my German programs to my best knowledge):
    1. Did the creator of the pdf file enable the import options?
    2. See import options: choose an other visibility option for your layer.
    3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
    4. See trimming: try the different modes there. Often works: "Media".
    5. Is the pdf file (eg from Word) correctly created?
    6. Is the PDF file protected? >>> no import possible.
    7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
    Good luck!
    Hans-Günter

  • Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

    Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

    iMac G4, Mac OS X (10.4.9)
    Make sure you have the latest Adobe Reader installed for your OS.
    http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
    Did you try using Preview. If you control click on the PDF on your desktop you can use the "open with" option.

  • Firefox 4.0 support for printing embedded PDF files in iFrames via JavaScript

    I recently upgraded to Firefox 4.0 and can no longer print embedded PDF documents contained in an iFrame.
    My company's web application has several pages which load PDF files from a Servlet into an iFrame. The pages in question all have "Print" buttons which when clicked executes a JavaScript function to obtain reference to the iframe containing the PDF, place it into focus() (e.g., frames['pdfdoc'].focus();), and invoke print() (e.g., frames['pdfdoc'].print();). There are no errors, or exceptions caught when the JavaScript function is invoked, but the "Print" button is no longer operational.
    Does Firefox 4.0 no longer support iFrames? The issue goes away if I revert back to ver 3.6.16

    I have same issue for printing embedded PDF files in iFrames via JavaScript in Firefox 5.0.
    In previous versions it was working fine. But not in Firefox 4.0/5.0.
    Is there any solution for this problem?

  • How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

    How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

    you need to "Get Info" on the file first. Select it, right click and select 'Get Info' in the menu.
    In the window that pops up, near the bottom, the "Open With" drop down menu needs changed. If the drop down menu does not present the one you want, select "Other" and find it.

Maybe you are looking for