Does Reports have an internal manner of displaying records ?

Hi all,
Even though there is an order by clause in the code of a query of a group , is there something else internal to Reports which directs it to display records ?

Hi,
the order by clause in the query has only impact for the lowest group in a query. For higher groups the Break Order Property of a column is relevant (and vice versa).
Regards
Rainer

Similar Messages

  • Why the iphone 4 does not have sound when I watching the recorded video?

    why the iphone 4 does not have sound when I watching the recorded video?

    Have you turned up the volume?
    Try the buttons, or the bottom audio slider.
    Does your phone normally play audio?
    And have you tried to record and audio note to check if your microphone is not faulty.

  • Does anyone have two 24" LED Cinema Displays on their Mac Pro?

    I'm wondering if there are any other Mac Pro users out there with two 24" LED Cinema Displays? If so, are you able to adjust the brightness of both displays? For me, no matter which brightness slider I adjust in System Preferences, only the brightness of one of the displays is adjusted.
    I originally created a thread last September:
    http://discussions.apple.com/thread.jspa?threadID=2160532
    If you have this problem too, please report it to <http://bugreporter.apple.com/>. My original Radar bug was #7222745, and it was found to be a duplicate of #6828443. Based on the IDs, I'd say this has been a known issue for at least a year.
    Thanks,
    Patrick

    I am using logitech G19 mouse and Naga Razer Epic, my current suspect that is their official driver which make my OS X 64bit kernl go nut. Does Logitech Control Center work for later version of their products such as G19?
    If I plggued in the G19 without installing their official gamepanel software, The heyboard still work, volume control slider works like a charm. I just get no advantages from the LCD screen (kind of pointless).
    If I install the razer mac driver, I keep seeing error log in console for the kzcorengineand razercorenginer process.
    Idid clean install of Mac OS X and have not experienced freeze except once when I was plugging in my 500gb transcend external drive. This Ext. Drive require two usb slot for power and transfer data.
    I am not sure if the freeze was coincidental or related to the transcend external drive I used. I did a directory permission repair and a repair to the mac drive, how things seems to stabilised.
    However I want to take my test further to install office 2011 to see if it cause those random unpredictable freeze again.
    Sigh, I paid $200 for such a good keyboard, but they have bad apple support. I dont like the apply ketyboard and magic mouse. It's immpossible to touch type on and even harder to play any game at all.
    Wayne, when you use your logitech product, do you install the product specific driver for each product plus LCC? or you just install LCC.
    Thank you

  • If a address does not have https: and a lock displayed how do I verify the security of the site?

    Folks,
    How do I verify the security of a web site when there is no https symbol and lock displayed in the browser?.
    Thanks in advance.

    On no account install Norton on your Mac.
    Norton Antivirus (made by Symantec) has a very long and illustrious reputation for mangling Mac OS X systems, sometimes to the point where a complete reinstall is necessary. Among other things, it installs kernel extensions which are known to cause kernel panics and system freezes; it contains known and documented bugs which can silently corrupt Adobe Photoshop and Adobe InDesign files, destroy a user's ability to authenticate as an administrator, and (on PPC systems) can cause Classic to stop functioning; and Symantec has on at least two occasions now released flawed .dat file updates which erroneously report certain critical Mac OS X files as "viruses." (Deleting these "viruses" causes damage to the system that in some cases renders it unbootable.)

  • Macbook does not have my monitor's native display.

    I'm using an acer H233H Monitor, and I have it connected by VGA. I have my macbook screen close, so it is only displaying on my monitor (not extended desktop). My monitor's native screen display is 1920 x 1080. However on system preference i only have 1600 x 1200 then the next one is 1920 x 1440. Whats weird is that sometimes (rarely) it would recognize the monitor and have the settings on 1920 x 1080. But its not stable, so i was wondering if i need to download any drivers or perhaps is there some settings on the mac im missing out on.
    Thanks in Advance.

    Another possibility is a broken wire inside the adapter. Sometimes it is making contact and sometimes not. Those times that it is working correctly vs. those times that it's not, do you notice the monitor is identified differently within Display Preferences? That would be further indication of an intermittent connection issue.

  • Installing WIndows 7 onto a Mac Mini that does not have an internal optical drive.

    Has anyone had any success in installing WIndows 7 onto a Mac Mini via Boot Camp using either a USB stick or an external SuperrDrive?

    Option 1: Get a USB "Super Drive" and use it to install windoze.
    Option 2: Use Parallels Desktop to run windoze.
    Option 3: Wait for someone who knows more than I do to tell you how to do it using magic.

  • Does Apple have any plan to allow to record phone call?

    I have used my iphone 4 for almost 4 years, and I really love iOS because of it's strong function.
    But my next cell phone may be the NEXUS, because I really need to a function of recording my phone call.
    Why does Apple don't allow recording calls? Is there any plan to allow it?

    I think illegal problem is not a good pretext for this matter.
    Let's think about how Google deal with this matter.
    There are too many people who are using iphone in the world, and there are various law system.
    I am a Korean, and it's legal to recording direct phone calls in Korea.
    Moreover sometimes recording files would be the best evidence in the court.
    I really want this function.

  • Does Java Fx has internal Frame?

    Hi It's my first time using javafx and I'm using on my project application, just wondering if JavaFx has internal frame ? and how to create it thanks in advance

    No, JavaFX 2.2 does not have an Internal Frame built into the platform.
    See [url https://forums.oracle.com/forums/thread.jspa?threadID=2443001]Thread: Like JFrames and JInternalFrames
    Also look at the windowing system in [url http://jfxtras.org/]jfxtras, which provides similar support (it's a later version of [url http://mihosoft.eu/?p=365]VFXWindows).

  • Does SAP have report display the history of dunning

    Dear Expert,
    Would like to seek for your help,Does SAP have report display the history of dunning for AR module and what are the T-code and report?
    Please help.
    Regards,
    KH

    Hi
    Dunning status is updated in customer master,you can get the required data from Table LFB5
    hope this will help to some extent
    Thanks
    Kameshwar Rao

  • I have a Macbook pro Retina display, I have a small nick in my screen that is annoying especially when watching videos. What is my best option for fixing it?/does apple care apply?

    I have a Macbook pro Retina display, I have a small nick in my screen that is annoying especially when watching videos. What is my best option for fixing it?/does apple care apply?

    Did you cause the nick? Or did it just appear one day? There are reports of the retina screen having exploding pixels which leaves a hole in the screen that can be felt when you rub your finger across it. If that is what happened then it should be covered under the warranty. If you caused the nick then it is not covered and the fix will be very expensive, somewhere in the $1000 range.
    astets wrote:
    I have a Macbook pro Retina display, I have a small nick in my screen that is annoying especially when watching videos. What is my best option for fixing it?/does apple care apply?

  • Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?

    Welcome to the Apple community.
    Does anyone have suggestions?
    Trash the spyware (Chrome) and use Safari.

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

  • The wifi available in the building I live in requires you to accept a user agreement each time you log on (obviously Apple TV does not have the option to display a browser webpage, so is there any other way to connect my Apple TV to the wifi??

    Hi guys,
    I cannot get my Apple TV to connect to the only available wifi connection in my building.
    Basically when I log on to it with other devices you have to type in a password (like all wifi connections) but then it opens a browser window with a user agreement that you have to accept each time you log on. Since Apple TV does not have a browser option I can't log it on.
    Is there anyway around this issue???
    Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
    Thanks guys!

    Is there anyway around this issue???
    Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
    Unfortunately not.

  • How do I connect  Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

    The FireWire cable is just for the FireWire ports on the display.  The display will run without it.

Maybe you are looking for

  • PO Deletion indicator cannot be unset

    Hi, We want to change a material based Unit of measure from PC to EA, but the material has an open PO. 1. We delete the PO item first with tcode ME22N then change the Material master (tcode MM02), change the based uom from PC to EA. done. 2. Then go

  • Getting ditributed  timeout  error

    Hi, when i 'm executing a procedure using dblink i'm getting following error ERROR at line 1: ORA-02049: timeout: distributed transaction waiting for lock ORA-02063: preceding line from PROD ORA-06512: at "PURGE.PURGEPERSON", line 111 ORA-06512: at l

  • IPad installation?

    I'm going to be getting an IPad 3 in the near future. Can I install Elements 11 onto it when I get it?

  • 3D Studio on new Macbook pro 2014

    Hi everyone, I work a lot on 3D Studio Max on windows and I was looking to switch to Mac. Does anyone know how the performanece would be affected since its a windows program? The Macbook Pro that Im looking into is this: 2.5GHz Quad-core Intel Core i

  • ICal Printing in latest version - What happened?

    This has been bugging me for ages and I can't find a workaround. When I used to print an iCal Calendar to paper or pdf it would print the scheduled items the same as they looked on the screen i.e. nice "boxes". Since iCal was updated I can't get this