Does restarting oc4j container redeploys the applications
does restarting oc4j container redeploys the applications that are in that container?
Thanks.
No it should not. What version of OC4J (Oracle Application Server) are you using? And are you noticing this behavior or just curious?
Thanks
Shail
Similar Messages
-
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
jennyba wrote:
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
As has been mentioned, the software in Mac OS X that supported the running of PPC applications rather than current Intel applications on Intel computers such as your MBP was last seen in Snow Leopard. However, since I believe your MBP originally came with Snow Leopard, you may be able to boot from the DVD's that came with the computer and install it on an external HD and try to install Quark on that.
I think a better solution would be to buy Snow Leopard Server from Apple by phone (800-692-7753 and be specific about wanting part # MC588Z/A), installing it as a virtual machine in software like VMware Fusion, and then installing Quark 6 in that. You'll still need a license number to authorize the Quark installation. -
whever i try to access websites, most of them work but facebook, youtube, my school email, sometimes even google, and alot other websites wont work for me and will tell me i need to update the lastest Flash Player. but when i try to download it, it says 'You can’t open the application “setup.exe” because Microsoft Windows applications are not supported on OS X.' what does that even mean?? This happens on safari, google chrome and i downloaded firefox and it worked for a couple of hours and then stopped working again.
please help, thanks in advance.1. Install Adobe Flash Player from Adobe site.
http://get.adobe.com/flashplayer/
Download it first. Click Safari in the menubar and select “Quit Safari”.
Follow the prompts and install it.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it. -
Error 1002097 while redeploying the application
Please, SOS! :(
I need to redeploy my Planning 11.1.1.3 application in EPMA after having added some some new members to Version dimension in the Dimension Library. Validation of the application goes ok but the redeployment is aborted with the following error:
+Detail : An Exception occurred during Application deployment.: The Hyperion Essbase operation failed with an error code: % ERROR_CODE%.com.hyperion.planning.olap.EssbaseException: Unable to load database [%s] (1002097)+
I will highly appreciate any ideas! Thanks!John, thank you so much for your guidance! I guess I am approaching the roots of this problem. So, I deploy the application with no problems if I leave "Create Outline" box unchecked. I cleared the application log and then launched the redeploy again with "Create Outline" box checked and for sure I got this error again, but then in EAS I have been able to see only the outline of the 1st of the 3 plan types to be created. Then I viewed the log for my application in EAS and it read the following:
+[Fri Jul 30 15:51:35 2010]Local/AppName///Error(1120006)+
+Unable to lock file [HyperionHome\products\Essbase\EssbaseServer\APP\AppName\Plan1\Plan1.esm]. Essbase will try again after a short delay.+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1120005)+
+Unable to lock file [HyperionHome\products\Essbase\EssbaseServer\APP\AppName\Plan1\Plan1.esm]. Please make sure other processes do not access Essbase files while Essbase server is running.+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Warning(1007089)+
+Unable to open [HyperionHome\products\Essbase\EssbaseServer\APP\AppName\Plan1\Plan1.esm] for database [Plan1]+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1002097)+
+Unable to load database [Plan1]+
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1002097)+
Unable to load database []
+[Fri Jul 30 15:51:36 2010]Local/AppName///Error(1002097)+
Unable to load database []
John, I would very highly appreciate your comment on the above! Thanks so much! -
How does session bean contain in the JSP page
May i know how session bean contains in the JSP page
If the situation is like the following ...
if i dont want to put the session bean in the session
like this :
session.setAttribute("UserBean",userBean);
the way i get the session bean is only
session.getAttribute("UserBean");
Does have the other way to get the Session bean during the JSP
if i dont want to use this kind of way,
what else i can do for?
may i know the solution with detailed
and please attach the solution of code to me if you know...
thanks...Hi,
I am not clear with ur query..
What I understood from ur query is that, u are trying to put the session ejb in the HttpSession Object for some use ahead in future?
If this is the case, then I think are approach is not correct.
StatefulSession beans are meant for this purpose, i.e they will be maintaining the client session. So use the same using the JndiLookup of the HomeInterface and the getting the Home reference and calling the businessmethods
sameer -
OHS12c on windows with TLSv1.2 enabled does not help to load the application on IE
Hi Guys,
I need your expertise in the below query.
Lately we were advised to disable SSLv2 and SSLv3 and only use the current best TLS1.x on our Web tier.
1.I have an OHS 11g which proxy passes the request to weblogic
2. Since we know that OHS11g does not support TLS 1.1 and TLS1.2 and only supports TLS 1.0 , we installed OHS12c [ which supports the stated protocols ] and
3. OHS 12c would proxy pass all its request to OHS 11g
3. But the problem is the default OHS 12 c has the below SSL setting :
# SSL Protocol Support:
# List the supported protocols.
SSLProtocol nzos_Version_1_2 nzos_Version_1_1 nzos_Version_1_0
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_DES_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA
4. The above settings makes the application not work on IE !! but works in other browser.
Please advise what is the global /standard OHS12 cipher combination to be used.
Thanks,
ParinHi Guys,
I need your expertise in the below query.
Lately we were advised to disable SSLv2 and SSLv3 and only use the current best TLS1.x on our Web tier.
1.I have an OHS 11g which proxy passes the request to weblogic
2. Since we know that OHS11g does not support TLS 1.1 and TLS1.2 and only supports TLS 1.0 , we installed OHS12c [ which supports the stated protocols ] and
3. OHS 12c would proxy pass all its request to OHS 11g
3. But the problem is the default OHS 12 c has the below SSL setting :
# SSL Protocol Support:
# List the supported protocols.
SSLProtocol nzos_Version_1_2 nzos_Version_1_1 nzos_Version_1_0
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_DES_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA
4. The above settings makes the application not work on IE !! but works in other browser.
Please advise what is the global /standard OHS12 cipher combination to be used.
Thanks,
Parin -
Report Generation for Excel does not work after using the Application Builder
I have a VI that writes data to an Excel file using the Report Generation Toolkit. I recently compiled the VI into a single Application (EXE) using the Application Builder. My VI runs its tests properly, but no data is written to Excel. What could be the cause? I don't receive any error messages.
Hi
I usually build exe-files, which sometimes also have report functionality.
Open the Application Builder and check the following things:
1. Add the following vis: _Word Dynamic VIs.vi, _Excel Dynamic VIs.vi They should be located in the directory ..\LabVIEW X.X\vi.lib\addons\_office in the llbs _wordsub.llb and _exclsub.llb (report1.jpg)
2. If you use an Installer, go to the Advanced Settings. There you can select some things to include in the Installer. Check if "NI Reports Support" is selected. (report2.jpg)
These are the things I always do, if I need reports and I never had problems up to now. I made two screen-shots of these settings.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
report.zip 25 KB -
I have tried multiple times to update the firefox7.0. It appears to download fine but I never get a prompt to move it to the applications folder. Now Firefox will not open at all (it was functioning sporatically over the past several months). How to fix?
AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole. -
Modify Business Rules without redeploying the application
Hello everyone,
When using a "Business Rules" with a BPMN Process, we can change the business rules without redoploying the application by using BPM Composer. I would like to know if it is possible to do the same thing when we use a business rules with a BPEL Process.
Thank you in advance for your answerHi Neeraj,
Thanks for your answer,
BPMN Process exist only in Oracle BPM Suite, in Oracle SOA Suite we have a BPEL Process to model the business activities
My problem is when I try to open a deployed project from Business Composer, it opens only projects where I use a BPMN Process. So when I use a business rules with a BPEL Process, I can't open the deployed project from the Business Composer.
Regards,
Edited by: Bilou on 1 juin 2012 12:53 -
Does your front row show the Applications playlist?
My Front Row has some bugs, I think.
Inside Music->Playlists, the following are listed but do not show their contents:
Applications
Library
TV Shows
But Applications shouldn't be there and TV shows already shows up in the main front row menu.
As for Library, this is my entire iTunes library. does anyone have this issue:?If your movies play with the QuickTime Player program outside of iPhoto, then Front Row will be able to show them. The "Movies" section of Front Row only looks inside your "Movies" folder in your home folder for files. If you make an alias from the iPhoto library of your movie file into the "Movies" folder, then Front Row should be able to see them and play them. Remember, if you drag an item (or some items) while holding down on the Apple and "option" keys (it may be "alt" on a non-North American keyboard), you will create an alias where you drop the items instead of moving them. That might help you move several of them or even the folder they're in to your "Movies" folder.
-Doug -
Does 3.1.2 fix the application icon sorting bug?
hello,
i notice that this new version of iTunes is buggy, the previous version would respect the icon sorting, but this new iTunes and iPhone OS version does not respect the sorting of icons...
the new feature to visualize the pages (i have 9 pages, more than 100 apps) does work partially...
is it only me?
the icons are sorted randomly...
and no matter if i choose sort by date, by name, category, it does NOT work....
please help~!well, i'm considering the fact that i am using Tiger 10.4.11 on a PPC Power BookG4, since the rest of the iTunes features work perfectly ok...
I had to check the specs. Those seem to be OK.
i now tried removing all the apps from iPod, and then i sync with just 20 apps... and this part worked fine, the checked apps were installed (and not the whole bunch of apps) and the 'sort by category' "seems" to be respected...
With the 3.0 update on the iPhone 3G that was the approach I took when none of the apps worked after the upgrade. I put them back in groups of about 10 after a couple of restore attempts failed. In the end they all worked fine. The iPod touch was unaffected, so there must have been something in the iPhone itself.
BTW, i did not install 3.1.2 yet... on purpose.. some ppl seemed to have issues...
Some people always have issued. Or, there are always some people with issues. -
Debugging application/OC4J container
I have some application running in separate 9iASR2 9.0.2.0.0 OC4J containers that appear to randomly freeze (this happened 7 times in May, 2003). Only restarting the OC4J container fixes the problem. As far as I can tell, there are no obvious problems (db connectivity, OS problems, ...) that could be causing this freezing.
My question is, how do you go about trouble shooting debugging an application running in a OC4J container. What kind of tools should I be using? Jprobe?
Any help is appreciated.
DanielHi Daniel --
Tools which act as profilers such as JDeveloper,JProbe, etc. can help assist with the codepath and possible source of a freeze.
Sounds like you've checked the right items -- I have seen instances where an application was leaking database connections in a side and infrequently executed codepath, which contributed to the system freezing.
Another option for freezes is to get the running JVM to do a thread-dump to see if there are any locks on objects that are leading to deadlocks -- this can be done on Unix by issuing a "kill -3 <pid>" on the running JVM process.
cheers
-steve- -
Shut Down Of OC4J Container ist blocked
Hi,
i'vi got a problem with the new 10g iAS and if anybody's encountered the same or does know a solution, please let me know.
The problem is:
I'm not able to stop the OC4J container in the iAS cleanly.
The reason is:
There are two timers (java.util.Timer) running. These timers are cleanup timers, which run always throughout the application at intervalls (scheduleAtFixedRate). If i dont start the timers, the container will stop right away, without any error. If the timers are running the container is waiting for them to cancel and shutting down hardly after a timeout.
I didn't have this problem with 9i and i dont have it in the embedded OC4J of the JDeveloper.
Is there any workaround? How could i latch into the shutdown process, to cancel the timers myself?
Best regards,
MirkoThe OC4J script is not the cause of this -- if the message is shown "shutting down OC4J' then the call has been made to OC4J and its in the process of shutting down.
If you execute "set verbose=on" before executing oc4j.cmd, then you'll see the command that oc4j uses when -shutdown is performed is exactly that command you suggest:
oc4j -shutdown -port 23791 -password welcome1Executing: D:\java\jdk150_11\bin\java -jar "d:\java\oc4j-10133-prod\j2ee\home\admin.jar" ormi://localhost:23791 oc4jadmin welcome1 -shutdown
But as you are suggesting there are manual ways to shutdown OC4J that are equally valid to use; it's a matter of choice.
What you could try is using the -force extra switch with the -shutdown command to force it to shutdown:
java -jar admin.jar ormi://localhost:23791 oc4jadmin welcome1 -shutdown force
If that fails, ctrl+c the process. It doesn't do any damage to it.
A thread-dump (ctrl+break) on the hung process can help to identify any deadlock issues.
oc4j.cmd is limited certainly, but it provides a simpler entry point IMHO for new users. And we still fully support/endorse the direct startup path using the runnable JAR file.
-steve- -
How can i modify servlet but not restart oc4j
after i replace the files under WEB-INF\classes,i need the new ones to be effective before i restart oc4j.
what should i do?There are two options: (1) to redeploy the application,
(2) to restart the application (but not OC4J).
Maybe you are looking for
-
My iPad keyboard (spontaneously?) divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them. The entire keyboard also became smaller. How can I get it back to normal?
-
NEW SINGLE LINE PLAN ??? WHERE IS IT????
I see there is another question out on this...but what's the story? How does one get this plan from an existing 1 line phone I have had with my 4s for 3 years.. I want reliable LTE service with 2 gigs of data, unlimited talk and text... HOW DO I DO
-
Read double from file containing 128 Bit formatted C-Floats
hi all, the Problem: i need to read double values out of a binary file. the binary was created by a program in c and contains 128 bit float values (16 byte). in c i can read the floats with the following command: fscanf(fin,"%16.7f",&i); but in java
-
I like coverflow (more than I thought I would) however, the downward movement of the file path(s) below gets a little awkward. The perfect combination would be coverflow at top with a column view below. Any chance this can be done with some sort of h
-
Hi I have created a BCO and have used in custom BO and XBO, Now I am trying to delete BCO but here I have observed few things 1. If we delete BCO from solution it will get delete but after refresh the solution, it will come back. Idealy it should giv