Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

Not that I know of. I have Acronis on all of my PCs, and have had to use a reinstall by the tib file. I believe (someone correct me if I'm wrong) Apple senses ip address, PC hardware configurations etc. to confirm a Authorized Computer Count. I had done a total reinstall of Windows 7, and iTunes still acknowledged that PC as being one of my Authorized PCs. So an Acronis restore should not be no problem. I also think that if a person maxes out on their 5 limit, that Apple allows you to be able to"re-set" it. Again,those who are more proficient here, can also confirm that.

Similar Messages

Problems getting Acronis True Image Home 2010 to find my image files.

I have recently purchased this A505-S6005 laptop and it has been nothing but a pain in the pretty much ever since I got it. Recently I have tried to roll back to a previous system image I created with Acronis True Image Home 2010 but am unsuccessful everytime I make the attempt.
Everytime I try to recover from the previous image which I have saved on a external drive I get an error message "Cannot find any hard disk drives" upon startup of the Acronis recovery manager. I get this problem no matter which way I go around it either from the boot cd that I created or directly from Windows and the Acronis software.
I simply cannot restore from my image file no matter how hard i try to get it to work.
Does anyone else have these issues with Acronis True Image 2010?

Satellite A505-S6005
Best to post in the Acronis forums.
-Jerry

Acronis True Image Backup/Restore

Had my 3000 K100 for about a month now - working fine.
Like many others, the one key restore feature, 20 GB "c" drive, hidden partitions all are a bit confusing to me.
I use Acronis True Image to create emergency boot disks, and have an external drive that I use to make an image of my c and d drives. I do a full backup at least once a week. So, I really don't have to rely on on the built in Lenovo restore features.
Is there a way to just "turn it off"? Then I could make my c drive bigger - and not worry about how it would affect the one key restore features, base backups, etc.
Lenovo 3000 K100 57061330 Intel Desktop Computer - Intel Core 2 Duo E6550 2.33GHz, 3GB DDR2, 500GB SATA, SATA DVDRW, Windows Vista Home Premium, Nvidia G-Force 8600, external Maxtor 500GB backup disk.

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

Windows 7 professional backup and restore stop working after installation of acronis true image 2010

HI,
windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
thanks
Song

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

Acronis True Image Frustration

I have a desktop computer running Windows XP Professional. My old hard drive is a WDC WD800JD. I have purchased and installed a new WDC WD5000AAKS hard drive. I am attempting to clone the old drive onto the new drive using the Acronis True Image WD Edition. I downloaded it recently and it is up to date.
I have now made several attempts to clone the old drive, all of which have failed. For the most part, I get past the point where I restart the computer and the Operation Progress window opens. At some point during "1 of 2 - Copying Partition" the process just freezes. I have let the computer run overnight but once it stops, it never goes any further. The mouse works, I can minimize the window or select the Cancell button. Although, cancell does not work.
I am totally stumped on what to do and quite frustrated with this software. I have tried shutting down as many programs as I can so nothing is running in the background. All my anti-virus programs are shut down. There is 9.64 Gb of free space on the old drive. Any thoughts?
If there is a better (free) cloning software out there, I will try it.

Hello,
I recommend you take a look at these links.
How to manually clone a disk with Acronis True Image WD Edition software
How to automatically clone a disk with Acronis True Image WD Edition software
Review the steps and try again. If you still have the same issue then I recommend you contact WD support.
Contact WD

Acronis True Image

I just received my x120e but I want to replace the hard drive, I am attempting to clone the factory drive as follows:
Using the clone tool in Acronis True Image, I have the source (factory) drive in my machine and the target drive in an external usb enclosure. After finalizing the settings windows reboots to the clone screen where the progress is documented in text.
Everything appears to be going well until about 70% everytime I have attempted. At this point the screen always turns off for some reason.
I'm not sure if the process is still continuing without the screen on or what, each time I have left it for a little while and then done a hard shutdown. Then when I inspect the target drive it always has one small system partition and then the rest unallocated space.
Anyone have any idea what is going on? Is there an easier way to clone the factory drive onto the new drive?
It is currently running right now and has gone to the black screen, I am going to let it run for an hour or so and see if it comes back.
Thanks!

richk wrote:
I put the current disk into the enclosure, the new drive into the main bay, and boot from the acronis CD.
Me too. In fact I would go as far to say that this point is mission critical.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How do I download Framemaker 11. My copy was wiped out by Acronis True Image.

I tried to clone my program disk with Acronis True Image. Through my fault, or through a program mis-step, the program wiped out my Framemaker 11. How do I download a new copy?

Online resources
For general Adobe Forums visit http://forums.adobe.com/community/framemake
To find help on topics related to downloading, installing, and
getting started with your software visit http://helpx.adobe.com/download-install.html
For product help
plus community-based instruction, inspiration, and support visit http://helpx.adobe.com/framemaker.html
Customer support
For Adobe Customer Care visit http://www.adobe.com/go/customer_support which provides assistance with product information, sales, registration,
and other issues.
Regards
Rajshree

TS1363 Why does ishuffle, used as disk, not play music away from my computer?

Why does ishuffle, used as disk, not play music away from my computer?

Welcome to the Apple community.
Yes, the quality and efficiency of the audio should be the same for both methods. The fact that it isn't may suggest that you have a problem on your network. Have you checked for interference.

Airport Extreme + Acronis True Image

I am trying to send a backup to my hard drive connected to the airport extreme by USB.
Acronis requires a user name and password to access the USB drive.
Anybody know what the username should be?
Anybody using this setup for windows?
Can anybody recommend a backup software that does work for them with this arrangement?

Hello,
No specific recommendation as to disk imaging software, but I wrote a document on various backup strategies that you might find of interest: Options for backing up your computer [PDF]
By the way, you might want to consider installing Microsoft Windows XP SP3 and all post-SP3 updates on the T20, just to get it up to date with all of the security and reliability updates Microsoft has made since SP2 was released.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Acronis True Image Notifications sending via SMTP

Sometime after 2/23 multiple devices stopped sending backup notifications due to some change at Verizon on the SMTP server. I am starting to believe it is related to phasing out of weaker SSL ciphers.I say this because I attempted to use gmail and received a blocked attempt due to an "older application". I overrode the gmail security settings and now it works but the thought of changing every backup job on every PC is just ridiculous. Other applications can send notifications. I cannot afford to upgrade 10+ licenses of Acronis because Verizon changed settings.
Anyone have ideas of how to work around or fix this?
Or why Verizon would make changes and not let anyone know?

> Hello again Berga
>
> Really sorry to trouble you again, but I've been in
> touch with Acronis support again and they are trying
> to trace the solution they did for you, and have
> asked me if I know the support reference number that
> you had on your emails from them. If you still have
> it that would be really great.
>
> Thanks a lot
Hi, no problem.
I have all the emails, from and to the Acronis, but the only reference
that can be useful is the follow:
----- Original Message -----
> From: "Acronis Customer Service Department" <[email protected]>
> To: <[email protected]>
> Sent: Tuesday, January 17, 2006 1:17 PM
> Subject: [Acronis #461748] RE: Acronis: Please confirm your wish to create
> an account
Thank you for taking the time to contact us.
> > --
> > Best regards,
> > Artem Khalitov
I hope will be useful for you.
Bye. Berga

Does anyone use Xfinity for their home Wifi?

If so, is yours very slow? Xfinity advertises lightning speeds but I am not getting anything close to fast! Please help!!

I have Xfinity and it works fine. Have you called Comcast? Are you only experiencing slow speeds on your phone or on all devices? On my iPhone, my Wifi was a slow so I did a full reset of my internet and then reset my phone's network settings. This seemed to speed things up.
To reset internet:
Unplug wireless router electricity and then follow the below steps. If you have phone service and your modem is also used for phone, it has a battery so you have to hit the reset button, you cannot just unplug its electricity:
Cable Modem Users
Reset your cable modem by pressing and holding down the reset button, located on the front or back of your modem, for five seconds. If there’s no reset button, then power cycle your modem.
To power cycle your modem:
Shut down your computer.
Unplug the cable modem from the electrical outlet.
Wait 10 seconds, then plug the cable modem back into the electrical outlet.
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
XFINITY Internet & Voice Modem Users
Shut down your computer
Find the reset button on the back of the unit.
Use a pen or any pointed, non-metallic object to press the reset button until you see the lights on the front of the unit go off.
Release the reset button and wait for the unit to cycle up (this may take up to five minutes).
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
Reset phone's network settings.

Does always using Force Quit to close programs make problems w/computer?

A friend was over and we were working on my iMac, and I used force quit to exit a couple of programs - and he gasped and said "Don't do that! It will cause problems with your machine!"
He sort of said something about directories - but ultimately I didn't understand why using force quit isn't the same as just closing, or why it would hurt my computer... Does anyone know?... My machine is running slow and has some quirks and I need to do a clean install because a system reinstall didn't help much. But I've also been downloading demos and trials right and left since I got it - which I've just found out is not a great idea and I've found out how to fix it from another forum.
So I don't know if what my friend says is true because I know I've done so many other weird things to my poor iMac out of sheer ignorance that it could be anything......
Is he right? Why wouldn't they give us that warning?
thanks -
maggie

The only time you should use Force Quit is when the application cannot be quit normally.
Why don't you just Quit the application?
Force Quit is not a good idea as all id does is stop the application very abruptly, it does not close down files properly or write away preference changes or any other items that should be written to the disk by the application. You stand a very high risk or corrupting the application, documents or your operating system by using Force Quit, especially when there is no need to do so.
Ian

Does it use cellular data to sync iPhone to iTunes on computer?

My phone is broken and it won't connect to wifi. I don't have any data left for my month.

Are you just syncing content? Or are you doing an update on the phone?
Syncing content doesn't use any data; not sure if updating a phone requires it to communicate with Apple's servers afterwards so that may use data.
~Lyssa

Downloaded book without authoring computer, so couldn't use on my Kobo reader. Have now authorized computer but Kobo reader won't recognize authorization.

I have now authorized my computer and Adobe has told me I can now use it on my Kobo reader. But the Kobo thinks it is not authorized. How do I tell it that it is?

I would ask in the Digital Editions forum, Adobe Digital Editions

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

Similar Messages

Maybe you are looking for