Does rmpb 2012 15" support 4k?

Hi,
I've read on some Apple discussions that rmbp 2012 15" actually supports 4k@30hz through hdmi (3840x2160@30hz).
macbook pro 4k TV UHDTV
Could anybody confirm that? I'm planning to buy a 4k monitor and I would'nt like to find out that it will not ever work.
Thanks un advance

Not according to its specs. It does not support that high a resolution.

Similar Messages

Does SCCM 2012 R2 supports PXE boot from Unix servers.

Does SCCM 2012 R2 supports PXE boot from Unix DHCP servers.
The client has DHCP on Unix servers. There are no Windows DHCP servers in the environment. Do we need Windows DHCP server for PXE boot.

You can use any modern DHCP server in your environment. DHCP is just used to help point the BIOS/Network Card to the right server, which in this case is your ConfigMgr Distribution Point with PXE Enabled.
It is strongly recommended to use IP Helper Addresses instead of the DHCP options though.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.

Does SCSM 2012 R2 supports reporting in fim 2010 r2?

Hi Everyone,
I have a scenario where i am configure fim reporting with SCSM and i have the fim version of 2010 r2 and scsm 2012 r2 ?It would be great if u provide me the information
I have ran the powershell script on on datawarehouse successfully
I have ran the initial sync and incremental sync successfully
while running ETL script of Add Snapins its tell me this is not installed on the machine i am still seeking an answer to fix this issue?
Your response is highly appreciated.
Thanks,
Aman Khanna

According to, http://technet.microsoft.com/en-us/library/jj863245%28v=ws.10%29.aspx, this is the latest support wrt SCSM:
System Center 2012 Service Manager with Windows Server 2008 and SQL Server 2008
Although its not specifically listed below, can we deduce SCSM 2012 R2 will be supported by MIM 2015?
http://blogs.technet.com/b/ad/archive/2014/11/18/microsoft-identity-manager-preview-release-1-is-now-available.aspx

Does sccm 2012 supports ibcm for linux and unix operating systems

folks,
does SCCM 2012 supports linux and unix operating system for IBCM ..........as per my knowledge it dont what i have learn t through bing........

I thought it's not supported for Linux and Unix, see also:
http://blogs.msdn.com/b/teju_shyamsundar/archive/2014/05/23/installing-the-system-center-2012-r2-configuration-manager-client-on-linux-part-2.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Does PB 12.6 support to use other connection method (e.g. OLEDB) MS SQL server 2012 ?

Hi
I checked following page and I understood that PB 12.6 supports native connection for connecting to MS SQL Server 2012.
Latest database native drivers supported by PowerBuilder 12.6
http://wiki.scn.sap.com/wiki/display/SYBPB/Latest+database+native+drivers+supported+by+PowerBuilder+12.6
But there is no info about other connecting methods (e.g. OLEDB).
Does PB 12.6 support to use them ?
And is there a info of it ?
Thanks.
Tsuyoshi Yagi

Hi Tsuyoshi;
1) FYI: OLE-DB and ODBC are examples of "middle-ware" and are not a direct connection to any DBMS vendor!
2) The true native client connection to SS is SNC (SQLServer Native Client). That connection mechanism is supported in PB.
Note: You could also use JDBC or ADO.Net as well from PB. Personally, I always use SNC for the best performance and supported DML functionality.
HTH
Regards ... Chris

Does the macbook pro supports the logitech gamepad 510/710? I't doesn't recognize it

Does the macbook pro supports the logitech gamepad 510/710? I't doesn't recognize it.
Is for playing to the FIFA 2012 for Mac

juliafrancine wrote:
I've tried looking for the install cd for it but I can't find it, now I'm starting to wonder if it even had one.
No. 10.7 never came one a disk. Read this:
Restoring iLife applications after Internet Restore of OS X Lion
If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start from Lion.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
http://support.apple.com/kb/HT4718

SQL Server 2012 Standard Support for Lync 2013

Hi,
Does SQL 2012 Standard version support Lycn 2013 , I am planning to have following features.
1- SQL 2012 Mirroring
2- Monitoring Role on FE Servers
Regards
Usman Ghani
Usman Ghani - MCITP Exchange 2010

Agree with Anthony, SQL 2012 Standard support Lync 2013.
For Standard or Edition Edition of SQL that according to High availability node of Database that you want.
Two-node failover clustering for the following:
Microsoft SQL Server 2012 Standard (64-bit edition). Additionally running the latest service pack is recommended.
Microsoft SQL Server 2008 R2 Standard (64-bit edition). Additionally running the latest service pack is recommended.
Up to sixteen-node failover clustering for the following:
Microsoft SQL Server 2012 Enterprise (64-bit edition). Additionally running the latest service pack is recommended.
Microsoft SQL Server 2008 R2 Enterprise database software (64-bit edition). Additionally running the latest service pack is recommended.
Also for more detail details, you can refer below link
http://technet.microsoft.com/en-us/library/gg412952.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Does IVI Step Type support NI PXIe-4112?

Hello, Guys
I have a PXIe-4112 and four of PXI-4130. When I try to configure my PXIe-4112 with the PowerSupply IVI Step Type, an error occurred.
An error occurred calling 'RunStep' in 'ISubstep' of 'zNI TestStand Ivi Step Types'
An error occurred while executing the step.
Component Works IVI Control Error: The IVI Configure operation failed for logical name '4112'.
Details: Attribute or property not supported. Attribute: NIDCPOWER_ATTR_OVP_ENABLED, Channel: 0 [IVI Error Code: BFFA0012]
Source: TSIviStepTypes
Surely I disabled the 'OVP Enabled' check box at the Edit IVI Power Supply Step Dialog. My system configuration is,
IVI Compliance Package 4.6
NI-DCPower 1.8.6
NI TestStand 2012 SP1
My PXI-4130s are working well with the IVI Step type. Does IVI Step Type support NI PXIe-4112? Or am I doing something wrong about it?
Regards,
Joonam
CTA, CLA
SuninCNS
Solved!
Go to Solution.
Attachments:
4112.png ‏17 KB

Hi Joonam,
The PowerSupply IVI step will not currently work with the 4112.
The 4112 does not support OVP. If the NIDCPOWER_ATTR_OVP_ENABLED attribute is set to True, the error that you described is expected. If it is set to False, no error should be generated. However, an error is generated when it is set to false. This is incorrect behavior in the driver and has already been documented under Corrective Action Report (CAR) #437105. This issue will likely be rectified in a future version of NI-DCPower.
The PowerSupply IVI step is hard-coded to set the attribute to true or false, based on the value of the check box in the Limit tab. The workaround to this problem is to replace your PowerSupply IVI step with a step based on a code module that doesn't try to set the OVP_ENABLED attribute at all.
I apologize for any trouble that this has caused you. Let me know if you would like any further clarification.
Regards,
Jared R.
Precision DC Product Support Engineer
National Instruments

Does solaris dhcp server support user class

Does solaris dhcp server support user class(option 77). In my environment, solaris dhcp server seems just ignore this option set in the client dhcp discover.
Does anybody can help me.

The clients are all Windows 7 x64 (but I've replicated the problem on MacOS and Solaris clients). The server is Solaris 11 x86.
For the problem to be the ARP cache, wouldn't the client's MAC address have to change during the reboot (i.e. the change in the client's MAC address is what causes the ARP cache to get confused, and hence the client gets blocked because of the MAC mismatch)?
Edited by: user13534003 on May 9, 2012 1:43 AM
Edited by: user13534003 on May 9, 2012 1:46 AM

Does Photoshop Lightroom 4 support the Olympus OM-D

Does Photoshop Lightroom 4 support the Olympus OM-D? Does not seem to out of the box but would like to know if there is a plug in or update available or coming soon.

LR4.1 (coming soon, currently RC2)
Download LR4.1 RC2 now from
http://labs.adobe.com/technologies/lightroom4-1/?tabID=details#tabTop
New Camera Support
Canon EOS 5D Mark III — introduced with release candidate 1 (March 29, 2012)
Canon EOS 60Da
Fuji FinePix F770EXR
Fuji FinePix F775EXR
Nikon D3200
Olympus OM-D EM-5
Panasonic Lumix DMC-GF5
Pentax K-01
RICOH LENS A16 24-85mm F3.5-5.5
Samsung NX20
Samsung NX210
Samsung NX1000
Sony Alpha NEX-VG20
Sony SLT-A57

Does firefox 6.02 support Norton Indentity safe?

Does Firefox 6.02 support Norton Indentity safe?
This is a part of Norton Internet Security 2012.
I do not want to update as the last time I updated Firefox it was not compatible with the new version.From 3.5 to 4.0

Norton has a compatibility patch for Firefox 6.
http://community.norton.com/t5/Norton-360/Update-Available-Firefox-6-0-Compatibility-Patch/td-p/512484

Does new 2012 mac pro ssd need trim enabler

does new 2012 mac pro ssd need trim enabler

Welcome to the Apple Support Communities
If they need TRIM (I think that the flash storage included with the MacBook Pro does not need TRIM), Apple turns it on by default with the MacBook.
However, there are some people that doesn't recommend TRIM because it may hurt (rather than improve) performance > http://blog.macsales.com/11051-to-trim-or-not-to-trim-owc-has-the-answer

Which resolution does the new macmini support?

Which resolution does the 2012 mac mini support? Would it be able to power the old 30"Cinema HD display, which has 2560 x 1600 pixels as an optimum resolution?

Apple seem to have had a brain seizure regarding making this information available. If you look at the KB article for the mid 2011 Mac mini model as here
http://support.apple.com/kb/SP632
it does show the required information. If you look at the equivalent article for the late 2012 Mac mini model as shown here
http://support.apple.com/kb/SP659
it does not show the resultions. I would say that the answer is the same, that is the new model supports the same resolutions. What has changed is how many displays it can simultaneously drive (now only 2).
So the answer to your question would be
Thunderbolt port with support for up to 2560-by-1600 resolution
HDMI port with support for up to 1920-by-1200 resolution
Note: If you are using a DVI display with a higher than 1920x1200 resolution, you need to use a Mini Displayport to DVI adaptor, furthermore as before the higher resolution monitors like the 30" Cinema Display need a dual-link DVI adaptor.

Does Siebel 8.1 Supports Hijri or Arabic Calender ?

Dear Sir,
Does Siebel 8.1 Supports HIjri or Arabic Calender ?
I have Insurance application in my company.I have Account screen,in this account screen one field has created called Date so for this date Field I want Arabic Calender.Does It possible in Siebel 8.1.If it is possible in siebel 8.1 then please give me the details.
please reply me soon.I am waiting for your Reply.
Thankx & Regards
Ahmed.
Edited by: 857690 on Jan 15, 2012 1:27 AM

Sorry, the question is
Does Weblogic 8.1 supports "referral"?

Does Siebel Management Server supports multiple gtwy servers/siebelservers?

Hello,
Does Siebel Management Server supports multiple gtwy servers and siebel servers when running getservers.pl ?
Does Siebel Management Agent service run under windows 2008 OS?
Cheers
Kota

Hi,
In addition to making sure Agent Proxy on all AD FS servers is enabled, please also verify that the IIS 6 Management Compatibility and
IIS 6 Metabase Compatibility role services are installed. (Some AD FS 2.0 scripts depend on Internet Information Services (IIS) Windows Management Instrumentation (WMI) objects being installed.)
Here are two links for your reference:
Discovery Does Not Work in ADFS 2012 R2 MP
http://blogs.technet.com/b/omx/archive/2014/05/07/discovery-does-not-work-in-adfs-2012-r2-mp.aspx
http://scug.be/christopher/2012/03/07/opsmgr-scom-adfs-2-0-mp-discovery-issue/
Regards,
Yan Li
Regards, Yan Li

Does rmpb 2012 15" support 4k?

Similar Messages

Maybe you are looking for