Does RoboHelp 10 include RoboHelp for Word?

Does RoboHelp 10 include RoboHelp for Word? The earlier version RoboHelp 9 included RoboHelp for Word.
Thanks in advance.

I reinstalled Adobe RoboHelp 10 all over again but this time more carefully keepign watch at each step. The option to install RoboHelp for Word is present but it's not installed by default and the option itself is not easily noticed during the installation. During installation, you need to select the product 'Adobe RoboHelp 10' in the left pane of the install wizard and it shows up the list of sub-options (one of the sub-options is RoboHelp for Word) in the right pane of the install wizard.
I contacted Adobe Support and convinced them to log an product enhancement request from a usability perspective.
So that's that. RoboHelp for Word is indeed present in RoboHelp 10 but it's not installed by default.
Thanks for posting you reply though.

Similar Messages

Finder does not display icon for word / excel in list view

Hi,
I got a new macbook air, with Yosemite pre installed. I copied over all my files (from my old macbook using a USB drive) and next I installed MS office for mac.
For some reason Finder does not display the correct excel of word icon in list view (I set preview thumbnail to NO in view options), but it it displays the generic file icon.
It appears to be very random, as some files do display the icon and others do not. It also appears to have nothing to do with the doc/docx xls/xlsx variations.
Also some of my parallels icons do not display correctly in list view.
When I open a INFO panel, it does show the correct icon. Example below:
Any body know how to reset / fix this ?

Still got no solution...
There has to be some one that knows about this ..?
Any professionals reading this that can point in some direction for a solution?

Why does the export pdf for word conversion get hung up?

I need to convert pdf file to Word 97-2003. When I follow all the steps it moves into the uploading file stage and then gets hung up and doesn't finish download. Blue down load file indicator stays on but download doesn't happen.

I am doing it from my home computer. I pay a yearly service fee for that
option and it's frustrating that I cannot access it, even though I could
before.
On Tue, Apr 30, 2013 at 2:07 AM, David Kastendick

Does Lion include support for iBooks?

Is there an iBooks application now available to the Mac community under Lion?
If so, I'll purchase and download Lion and convert to iBooks in a heartbeat.
If not, I'll stick with Snow Leopard and Kindle.
Don't want nor need a cell phone, Ain't buying a pad or reader, listen to the local FM Rock station and don't need an iPod, but ...
I live by my MacBook Air.
I read on my MacBook Air.
And ... having played with it in the Apple Store, would really like to use iBooks on my MacBook Air.
I'd rather give Apple my money for books than Amazon, but I ain't gonna puke up hundreds of more dollars for an i-Pad, Pod or Phone for the privilege of doing so.
So, What Say You? Is there an iBooks application now available to the Mac community under Lion?

Older Macs, some models back as far as 2007, can run Mavericks and hence get the iBooks app, and Mavericks is free for any system that has at least Mac OS X 10.6.8.
And you posted in the thread that was last active over two years ago, predating Mavericks by a long time, just FYI. Not usually a very productive approach.
Regards.

While using Build App installer, how does one include drivers for hardware

I have a LabView vi and I would like to create an application to be installed on a different computer that also requires a PCI-6503 digital IO card for the purpose. While using Build Application to create the installer, is there a way I can include the necessary hardware drivers for the DIO card?
Thanks.
-Bahadir

Hi Bahadir,
Your request for the option of including specific drivers (in your case NI-DAQmx)
with the installer of your executable is something that is something we have
heard from many customers. With any version of LabVIEW up to 7.1.1, you have
always had to install the drivers separately or in best case by creating your
own *.bat file that defines the installation procedure of the driver.
However, LabVIEW 8 is here for
your rescue! We have listened to our customers and now you have the simple
option of putting a checkmark for the option of the driver you want to be
distributed with your installer. Check these options from the Installer
Provider:
Please read more about the new possibilities with LabVIEW 8 from this tutorial:
Distributing
Applications with the LabVIEW Application Builder
The best part of it all is that you can try it all
(including Application Builder) out by downloading the Evaluation version here:
LabVIEW
8 Evaluation Software Download
Notice that the Evaluation version of LabVIEW 8 is similar
to the Professional Development System, except from a watermark and the fact
that is only runs for 30 days. Everything else is possible!!!
Try out LabVIEW 8 and check out all the other places we have
listened to our customers...
Have fun!
- Philip Courtois, Thinkbot Solutions

Invoice receipt does not include tax for each item in PO history

Hi gurus,
            we received 2 items against a PO
netprice-- tax-----total
item 1--> 9010--
100
item 2-->205--
25
                      total GR amount           :      125
invoice received for $125
but if i see in the PO history the tax for both items is added up and shown for only one item.for 2nd item it shows only netprice,it doesn't show tax .
is it a config setting thats affecting this or any other setting that need to be looked at
The PO history looks like this:
for item 1----
for item 2)    .
GR--100--
25
Inv. Rec.-----105--
20
invoice verification is a new concept to me,I would appreciate any suggestions about the settings tobe looked at for rectifying this?
Thanks,
Chris T

hi Chris T
i think this not a config issue. i think the MM people when they do GR/IR they adding all tax to the net pice .
to solve this we can cancel that GR/IR and post with right net price
thanks,
subbu

Is RoboHelp for Word packaged with RoboHelp 11?

Is RoboHelp for Word packaged with RoboHelp 11?

No. The last version to include Rh for Word was Rh10. Is there a specific reason for wanting to stick with Rh for Word? There is a learning curve with Rh HTML but it shouldn't be too difficult.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

RH for word download question

As I understand, RH 8 does include the "classic" WinHelp-based RoboHelp (and does not just force you to convert WinHelp files to WebHelp).
Is this a standard part of the download? I ask because I don't seem to have it loaded. I don't have the desktop icon or the .exe anywhere on my machine.
I'd really prefer not to go through the whole download process again. I'm not sure if I just clicked the wrong option during the download and accidently excluded this part or what.

If you select a custom install there are some dropdowns or arrows, something, that gives you an option to include RH for Word. You do NOT need to download again. There is only one download and you have it. Poke about a bit.
See www.grainge.org for RoboHelp and Authoring tips

Why the State field does not include "DC"?

The field for State has a drop down box but does not include DC for the District of Columbia.

Are you talking about State field in our form templates? Yes, DC wasn't listed, but you can modify forms created from these templates easily. Here are the steps:
1. Select the dropdown and click on the Pencial like edit button
2. Mouse over the option "CT" and click on the "+" button to add a new state "DC"
Thanks,
Wenlan

Converting RoboHelp for Word to RoboHelp HTML (v8)

I have a RoboHelp for Word (started at v6, converted to v7, and now at v8) project that I want to convert to a RoboHelp HTML v8 project.
The RoboHelp for Word V8 looks good, works great and builds good looking WebHelp and MS Html Help finished outputs! But, I can't seem to figure out how to embed Captivate App Demos (SWF) into the project. Another post in these forums indicated that this is easy with RoboHelp HTML; and after some testing, indeed it is! Great.
Now - the question is, how do I get my existing (looks good, feels great) RoboHelp for Word V8 project imported into RoboHelp HTML V8?
I made a copy of my RHWord project directory (so as not to screw anything up) and then opened RHHTML and chose to import an existing HPJ project. When asked whether to keep the project file XPJ or go to HHP, I chose HHP.
During the conversion, I get lots of "images not valid; invalid chars" on GIF files that RHWord has no problem with. It will not display nor publish these GIF files. Actually, it does display some of the GIFs in the RHHTML dev env, but then doesn't publish them!
Also, during the conversion, it asks if you want a single CSS for each file or one CSS based on one of the WORD docs from the RHWord project. The default was the former, so I chose it. After the conversion, many of the topics have CSS data that appears at the top (e.g. long list of font names) that end up getting published also. So why did this happen?
Also, after the conversion, many of the topics have non-displayable characters that do not show up in the RHWord version; source or published version.
So - my question is, how do I correctly go from a RHWord project that seems to edit and publish just fine to a RHHTML project cleanly?
I have tried to be as detailed as possible on each of these issues, but if more is required, let me know.
Thanks much for your assistance,
Jeff
Message was edited by: jonestech

The original post included a complaint:
"After the conversion, many of the topics have CSS data that appears at the top (e.g. long list of font names) that end up getting published also"
I didn't spot an answer to this part of the problem. I may have missed it
I see this also in importig a RH8 WinHelp project for conversion to WebHelp. It's no big deal to just delete the font list in projects that have just a single original Word doc, but I have a number of projects that each contain hundreds of Word docs, and the font list is inserted tt the top of each converted htm file.
So I am motivated to find a solution...
Any ideas RH troops???

This is a bit of information for folks that use Robohelp for Word.

I know this is all a day late and a follar short but for those folks that still use Robohelp for Word:
If your company is going to Windows 7, X5 will not work. You need to bump it up to at least RH8.
Even after you upgrade, if you use the tripane (winhelp_2000) view in RH for Word, it will not work on Windows 7 even with the microsoft patch. With the patch it will look like an older version of RH in winhelp_4. At least I have not been able to get it to display.
What will work is if you compile it in Webhelp. You will loose some links. I know I should be moving to Robhelp Html and I tried, but when I did that I got a lot of garbage at the top of all my topics, I lost all my external links and I would have to retrain my partner...
Now about links. My only complaint about Robohelp for Word was it's limited external linking capacity. If you use RH for Word you know you can only brouse to the net or to an htm or html document. It doesn't mean you can't link to a PDF or an excel spread sheet. You just can't brouse to it. You can manually enter the path. I just changed 740+ htm links to pdf links (pdf in same file as htm and the names were the same except for extension) and it worked. If you intend to try this back up.
Anyway, if this helps anyone great..if not thanks for letting me babble. I like my Robohelp for Word in Webhelp format.
Peggy Theo.

Thanks for posting this Peggy.
It is worth adding that there is another way of continuing to work with Word - using Linked Documents in RoboHelp HTML. You create Word documents entirely independent of RoboHelp and then create topics by linking those documents in a RoboHelp HTML project.
You cannot create WinHelp that way but WinHelp is on life support and requires users to download a viewer, you cannot distribute it. It really is time to move on from WinHelp.
RoboHelp for Word is not getting much development and does not get the new features being added to RoboHelp HTML.
Linking is covered on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Converting RoboHelp 7 HTML Project to RoboHelp 9 for Word Project?

Due to complications in localization, I've been asked to evaluate authoring in doc files instead of HTMs, since the tool we use for localization (Across Server) seems to work better (or so we're told) with doc files.
I've only authored in RoboHelp HTML with a CHM output for the last several years, so I'm unfamiliar with RH for Word. But I have used Doc-to-Help many years ago, so I'm somewhat familiar with the implications of using doc files.
How would I go about doing this conversion? Is there some utility that does this, or is the best way to export to a printed output and then import that output into a new project?
I'm also going to evaluate this using RH 9 since I'm considering upgrading from RH 7. I only have Word 2003.
Thanks in advance,
Jared

RoboHelp for Word has only had minimal changes for the last two versions. Take a hint. Also enhancements to RoboHelp HTML outputs have not been mirrored.
I suggest you do some work in RoboHelp for Word and see how much you enjoy it.
As for conversion, open RoboHelp for Word and see the import options. Your idea seems to be the way to go, if you really really have to.
Oh, one more thing, you will not get much help in the RoboHelp for Word forum because there is hardly any user to user support.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

RoboHelp 8 for Word not installed with RoboHelp HTML?

My workplace just upgraded from RoboHelp Office 5x to RoboHelp 8. Come to find out, *all* that was installed was RoboHelp 8 HTML. The RoboHelp 8 for Word part of the application was not installed.
The department responsible for software installations says that they don't have the RoboHelp 8 Word program--that it didn't come with the RoboHelp download. They are insisting that it's not available, and will probably have to be purchased separately.
Has anyone else installed a volume license from a download?
If so, were the HTML and Word portions of the program both available?
Did both parts of the application install (HTML and Word)?
If one installer was used, was the the RoboHelp 8 for Word portion missing? (I.e., is this a bug?) Or did you get the whole thing?
If more than one installer was used, were the components downloaded in separate installation files? (Could someone have missed an installation file, in other words?)
FYI, please, I don't need all the advantages and reasons why I should use HTML Help or WebHelp instead. I work for a government agency, and need to just generate WinHelp to replace an existing Help file, not make everyone change a whole bunch of stuff to use WebHelp or a CHM file. I need WinHelp output from Word. And, one more thing: I do not have administrator access on my PC either.
Feedback, experiences, and suggestions welcome. Thanks in advance for your help!
Di

The licence you bought was for RoboHelp Office which includes both the RoboHelp for Word and RoboHelp HTML applications. Each of these three has it's own installation file so I suspect that they have installed just the RoboHelp HTML application. They should have the details for the RoboHelp for Word application, or better still the RoboHelp Office application which gives you the options of what to install according to your needs.
The RoboColum(n)
@robocolumn
Colum McAndrew

Generating RoboHelp for Word with RH6 in HTML Doesn't Remove MSO styles

Here's the Word portion of the question, which I really
should post under a separate heading. (The WebHelp portion is under
WebHelp - DiMost, posted March 19, 2007)
In RHx5, I use(d) RoboHelp for Word to convert my documents
from an Information Mapping format (with tables) to a stripped-down
document that I converted to HTML without all the Word inline
styles.
- Applied a "conversion" template to the doc
- Imported the doc into the RH for Word file.
- Converted the styles and removed page breaks
- Converted ONE heading to the main topic
- Created WinHelp and checked to be sure there are no
corrupted tables and the topic converted
- Generated in WebHelp
- Imported the HTML document output to the main WebHelp
project. (The document arrives without all the MSO word inline
styles)
- Applied the CSS for the project.
Document conversion complete....all the inline styles were
removed.
NOW, RH 6 retains all the styles and converts every heading
style to a topic, even though RH5 did not.
Converting it in RoboHelp for Word x5 worked really well, but
doesn't appear to work now. And importing the Word doc directly
into RH6 for the WebHelp project is still the huge mess it was
before. It looks like it still requires hand-stripping all that
code out by hand.
Believe me, I have tried everything (including freestanding
apps) to get rid of the Word (MSO-whatever) embedded styles out of
the Word HTML.
I welcome any ideas. Thanks!
Diana

I don't think anything changed on defining what should be a
new topic. Check the options as you import as that can make such a
difference and of course your RH6 settings will be different
initially.

Upgrading to Windows 7 with Robohelp for Word X5

Currently using Robohelp for Word X5 on Windows XP Professional with Microsoft Office 2003.
I'm a consultant and my client's IT department is planning to upgrade to Windows 7. Does anyone know if X5 will work with Windows 7?
Thanks,
Brenda Hutch
Consultant

I very much doubt you have a snowball's chance in hell. Rh 8 was the first version to be supported under Windows 7 and then only when patched.
Another consideration is that even if it did work, the outputs would not be compatible with modern browsers. They would not work on Chrome for example. Time to upgrade more than the operating system is my take.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Does RoboHelp 10 include RoboHelp for Word?

Similar Messages

Maybe you are looking for