Does running Photoshop CS5 and CS6 cause problems with plugins?

I have Phootshop CS5 (32 bit) and have also installed CS6 (64 bit) on the same PC. After installing CS6, and reinstalling the plugins, many plugins do not run on CS but continue to work on CS5? In some cases (Topaz for example), some filters load and others do not. Any ideas?

Thanks
Worked!

Similar Messages

ATI Radeon 7000 series and Photoshop CS5 and CS6

Interesting to note, Running windows 7 64bit I have bought a new graphics card, it is an ATI Radeon HD7900 bought to run Photoshop CS5 and 6 unfortunately the graphics card is not displayed in the photoshop prefrences, I checked the list of cards supported by Adobe and the Radeon 7000 series was listed.....I rang Adobe who states that the HD7000 is not supported, so until (if ever ) it is I cannot use the full functionality of Photoshop CS5 extended. I'm not sure if all the Radeon HD cards are supported or not, but maybe check before you invest in a new card.

The Radeon 7000 series cards should work fine with both CS5 and CS6, but as Steve noted there is a problem with the current drivers for the card. Until the 12.7 driver is released next month, I'd suggest using the following driver:
http://support.amd.com/us/kbarticles/Pages/AMDCatalyst126beta.aspx
Use the control panel on your system to completely uninstall your current driver before installing the 12.6 beta driver. Please let us know if the beta driver resolves the issues you're seeing.
Thanks,
Adam

Open Photoshop CS5 and CS6

I can't open Photoshop CS5 and CS6 versions simultaneously. When I launch CS6, and then CS5, it takes me to CS6, and vice versa.
Is it possible to keep open the two versions? With Indesign I can do it.

As far as I know that is normal behavior: only one instance of Photoshop at a time. Forum members have reported running two versions of Photoshop simultaneously using virtual machines on their computer (which emulate separate computers).

Are Photoshop CS5 and CS6 compatible with Windows 8

Are Photoshop CS5 and CS6 compatible with Windows 8?

Yes, I'm running CS6 on 8.1, and I'm sure CS5 works as well.

Photoshop CS5 and CS6 does not start. Windows 7

I am using Photoshop CS5 as well as CS6, 64-bit on Windows 7. Since the last few days, I noticed that Photoshop would take a very long time to start (earlier it used to start within few seconds). Today, I found that both the Photoshop versions do not start at all. Nothing happens when I click the short-cut on the Task Bar. Neither do they start through the Start Menu. Why does this happen and what is the solution?

Have you tried using the task manager to see if Photoshop is hung and look at your windows reliability history to see if Photoshop CS5 an CS6 are crashing?

Compatibility with Photoshop CS5 and CS6

Anyone who can help me please leave a comment or a suggestion. I would gladly appreciate it!!
I am starting a Digital Media class in college and CS5 is what is setup on the computers and textbooks are also about CS5 as well. They haven't upgraded to CS6 yet. I am mainly doing Photoshop, Flash Professional, and Illustrator in this class. The first program we are using is Photoshop. I have just paid for and downloaded the Creative Cloud and everything pertains to CS6.
My question is should I stick with using Photoshop CS5? Or can Photoshop CS6 be used as long as I don't use the newer parts of the program?
Also will there be compatible issues in say for instance I am doing a project and going back and forth from my computer at home (with CS6) to working on it at school (with CS5)?

As long as you enable the "Maximum Compatibility" option, you will always have data to work with. Of course some features will not be available, but that should not be that big an issue. I'd rather be concerned about Flash and Illustrator, which are much more prone to converting data into non-editable stuff when saving from a newer version to an older version....
Mylenium

Photoshop CS5 and CS6 not opening after Windows 7 update

Hi there!
I have my Mac on repair so I have to use Photoshop on a very old Windows 7 laptop of mine (the first PS licence I bought was for PS CS4 Win then extended to CS5 during grace period)
It always worked fine (slow but fine ) since today. I was updating a couple of softwares (Intuos + Spyderpro) and I have been asked to restart my computer to make the updates effective. I've noticed that Windows during the restart was updating itself as well and I said "well, ok!" and let it go. But once my computer had restarted I couldn't open PS CS5 anymore. Desperate I went to the Adobe trial pages and downloaded CS6 but it doesn't work as well. I tried to repair some log errors via CC cleaner and delete PS preferences from its folder but no luck. I don't know what else to do. Bridge works fine. I don't understand what happened and how to solve it.

Hi Valeria,
My first inclination was to recommend just reinstalling, but since you said you did a new install of CS6 and that isn't working either I'm not sure if that would help. The user preferences was also a great thing to try.
These might be some other general suggestions for good next steps:
- Try launching with right-click Run as Administrator
- Create a new administrative account, log out of your current one, and attempt launching from there
- See if you get the same behavior if launching while in a Selective Startup
http://windows.microsoft.com/en-us/windows/run-selective-startup-system-configuration#1TC= windows-7
- Uninstall any changes you made since it stopped working, you should be able to uninstall the Windows update from within Programs and Features, uninstall the Intuos + Spyderpro temporarily to rule them out
Hope that helps,
- Dave

Photoshop cs5 and cs6 closing by itself?

Hello,
On a PC with XP.
Recently cs5.1 extended started closing by itself after being open for just a few minutes.
Upgrade to cs6 today and the same thing happened:
Opened photoshop, created a .psd file, added color and text, left the program and it closed by itself.
Don't understand. Help.
Thanks
John

There's really no way anyone's going to be able to diagnose the problem based on just what you have said.
Chances are a display driver update or something that's been installed/changed on your system has made the environment unstable or insufficient for Photoshop to work.
You might even have contracted malware.
Something's wrong with your system. You might even have to go so far as to either restore from a backup to a time in which it was working, or do a fresh install.
If you do have to start over, I recommend you consider upgrading to a modern operating system.
-Noel

Photoshop cc and cs6 Major problem

Hey guys i really need help with this. My adobe photoshop closes after splash screan. heres a video of it ( http://gyazo.com/6bbc0b4dac9594cfe146ab4080f6f75e )
my system requirementrs meet the expectation of it. i have tried so many things please help. thanks

Look in your Window Application Event Log. There should be errors logged there that may identify the faulting module.
Your basic remedies to try may include removal of 3rd party plug-ins and reinstallation of Photoshop.
-Noel

How do I manipulate color after changing an image to halftone with bitmap in Photoshop CS5 and CS6?

Hi,
I'm just starting to play with turning into images into halftone image. So far I've learned how to do it 2 ways: 1) using the Pixelate>Halftone filter and 2)Converting the image to grayscale then bitmap>halftone. After either technique, I'm a little lost on how to best changel color - not as whole but to convert different section to different colors - kind of Andy Warhold look. I've tried the history brush. I've dragged it into illustrator (which I tried live trace). But I'm not quite getting the flexibility of just painting different areas different colors. Also, what angles work best to avoid strange grid effects?
Any techniques or inside advice would be greatly approciated! Thanks, Andrea

Why not apply the halftone to a duplicate layer, that way, you still retain the colors, you can then allow some or all of the colors to show through, using blend modes, masks or opacity changes.

CS5 Production Premium causing problems with CS4 Production Premium

I have been using CS5 Production Premium alongside CS4 Production Premium for a while now. After Effects, PhotoShop & Illustrator work alright together (both CS4 & CS5 versions). My job actually necessitates me keeping both versions on my machine.
I had need to use both Premiere Pro CS4 and Encore CS4, and neither of the applications would initialize. The following is the error message from clicking the Premiere Pro CS4 application file.
I am uncertain what the application event log is or where it is located.
Over on Creative Cow's site, I posted a similar message in the forums, in which a user stated that I should not have CS4 and CS5 on the same partition of my drive.
I do have a secondary internal hard drive on which I could install one of the suites, however, I want to make sure that it is done properly and efficiently. I have seen some issues with uninstalling CS4 after installing CS5, so I wanted to ask for help before I simply begin to rip software off my PC (since After Effects and PhotoShop - which work - actually comprise 95% of my Adobe workload).
Any suggestions or guidance is appreciated. Also, which version (CS4 or CS5) would be better suited on the secondary drive?
Thank you in advance for your time and assistance.
Stephen Rutherford
Current System Configuration:
Intel i7 920 PC 2.67 GHz
Windows Vista Ultimate 64 Bit
12 GB DDR3 RAM
NVIDIA GeForceGTS 250 512MB DDR3
Adobe Production Premium CS5/CS4/CS3
3D Studio Max 2011/2010/2009

I am running CS4 Design Premium and Lion without any real issues. I can't guarantee it will be the same for you, but my experience has been good.

Will photoshop cs5 and lightroom 3 work with os x mountain lion?

I want to upddate to OS X Mauntain Lion but want to know if I will still be able to use my photography programs with it.

I suggest checking here:
http://roaringapps.com/

My Mac is 15 months old and all of a sudden it has started resetting the time and date then I get a message saying not all apps will work because of the pre Jan date any help as to why ? Causing problems with wireless router.

My Mac book pro is 15 months old and now suddenly it has started resetting the date and time, causing problems with applications and my wireless access. Any suggestions as to why this is happening and how to fix it?

Seems the time isn't being saved to your computer correctly, it may be a corrupt file that isn't saving the time anymore.
You can move the
com.apple.systempreferences.plist
file out of your Users/Library/Preferences folder to the desktop and reboot.
then go to your System Preferences > Date and Time and set a time server close to your location (or in your time zone)
(trash the file on the desktop if no ill issues occur later on)
or you can follow/bookmark these support docs to reset your PRAM and SMC (and for future reference)
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509
I don't remember exactly where OS X is keeping it time settings now, but I think one of those choices should help resolve your issue and won't hurt anything giving them a shot. Perhaps someone else could refresh my memory.

Warning CS4 CS5 and CS6 Photoshop Action Users

Adobe introduce the Adjustment Panel in CS4 and included two option that you should NEVER CHANGE from their default setting. For if either or both are change from their default settings some actions that add adjustment layers will fail to work properly. They may or may not produce error pop-ups.
I have been trying to get this fixed for a couple of years now. The other day I received an e-mail from an Adobe programmer informing me that he had been assigned the task to fix the problems I've been having. He included information he was considering. It was clear he did not fully understand the problems and that keeping one of the options would make it impossible to maintain compatibility with previous versions of Photoshop. I wrote two e-mails explaining the problems and a third detailing what the problems I saw with what was proposing. He wrote back the all he wanted to do was to work on part of the problem not the whole problem. I wrote a fourth note but Adobe is back is stealth mode.
The two options in the Adjustment Panel fly-out menu are:
"Add Layer Mask by Default" checked by default. This is how Photoshop always worked prior to CS4 there was never an option not to add one so nothing was ever recorded whether or not a layer mask was to be added they always were. Changing this will make Photoshop not backward compatible.
"Clip to Layer" not checked by default. There has always been an option to clip adjustment layers to the previous layer. So when the option is used the action recorder records the option "With Clipping Mask" in the make adjustment layer step. When the Adjustment Layer is not clipped the option "with Clipping Mask" is not recorded. In the past these recordings played back correctly and still do if the Adjustment Panel fly-out option "Clip to Layer" is not checked. However if Adjustment Panel option is checked even though is was nit when the action was recorded for the option "With Clipping Mas" is not recorded Photoshop clips the layer because of the Adjustment Panel current Option setting. That could be fixed. The current option setting has no meaning in this context in fact the Adjustment panel may not have even been used to recode the Make Adjustment Layer step.
Here is a link to a simple action recorded in CS6. It opens a new default size document add an Levels Adjustment Layer deletes the layer mask and then clips the adjustment layer to the previous layer. The Action will play correctly in all versions of Photoshop prior to cs4. It will fail in CS4, CS5 and CS6 if either or both of the Adjustments Panel fly-out options are changed from their default setting. http://www.mouseprints.net/old/dpr/CS6AdjLayer.atn

Generally, you would have got the option to remove the old versions. However, you can uninstall the old versions but you should do it from Windows Add/Remove modules in the Control Panel so that it doesn't remove the common files from your machine.
If you are not constrained by disk space then the best thing is to leave the old programs on the system until you are familiar with the new features of the upgraded program.
I have renmoved the old programs from my Windows 7 because I wasn't using them. These days I use "Corel Paintshop Pro X5" and "Corel Draw Graphics Suite X6".
Photoshop is for something I need to test for my colleagues who are not familiar with certain features in Corel so I tell them how to do it in PS CS6.
Hope this helps.

Photoshop CS5 and photoshop CS6

I own Photoshop CS5 and i upgraded to photoshop CS6 I can't download on my new mac laptop please help

you can download to your mac. you'll need mac serial numbers to install.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Does running Photoshop CS5 and CS6 cause problems with plugins?

Similar Messages

Maybe you are looking for