Does safari 5.1 work in 32 bit mode

HI,
I am using a 32 bit plugin which works fine in safari 5.0.5 when run in 32 bit mode. But I have installed safari 5.1 recently and i launched safari in 32 bit mode by checking the check box from Get Info. But still my plugin doesn't work. Does safari 5.1 work fine in 32 bit mode as safari 5.0.5. I read some were that from Lion Mac OX 10.7 , safari 5.1 will work in 64 bit mode. does that mean support for safari in 32 bit mode completely removed?

Hi Barry,
Thank you for the info..
To verify if I am seeing this issue with only my plugin..i tried installing adobe shock wave plugin and tested using the following url- "www.adobe.com/shockwave/welcom" . Animation available in that page is not getting displayed. But i dont get a pop to launch the browser in 32 bit mode. If I launch safari in 64 bit mode itself I get the pop telling the plugin will work fine only in 32 bit mode.
Where as i can see the animation getting played fine in safari 5.0.5 in 32 bit mode and pop msg to launch the browser when tried in 64 bit mode.
Can you please give me some input on what settings you have done to launch safari in 32 bit mode , other than checking the check box "open in 32 bit mode" under safari->getInfo .
Regards.

Similar Messages

  • Itunes 11.1.5 does not recognize the switch to 64 bit mode from 32... won't open

    itunes 11.1.5 does not recognize the switch to 64 bit mode from 32... won't open

    Is there some background story to this that might give us some clue?  An error message quoted exactly? Did you just do an update?
    Try starting iTunes with the shift key held down.  If it starts it is probably some old plugin presenting problems.

  • Magic Mouse not working in 32 bit mode?

    Hello,
    I decided to boot my 64-bit 8 core Mac pro in 32 bit and the mouse (bluetooth apple magic mouse) was not working... The keyboard did work however.
    Im not necessarily looking for a remedy to this problem as I don't really plan on using my system in 32 bit mode on a regular basis..... I was just wondering why it might be doing this..
    Anyone have an idea?

    Never mind... this is the MAC Pro section!
    I must be really out of it this morning.... :/
    Message was edited by: MACATTACK2010

  • Safari won't run in 32-bit mode?

    Hi, until yesterday I was able to run Safari in 32-bit and some applications/utilities such as LiveDictionary and WebSnapper could run in this manner. Suddenly this morning the above mentioned applications don't work any more and I think the problem is that Safari for some strange reason is not running any longer in 32-bit mode. Its setting in 32-bit mode is OK. I have toggled on/off the 32-bit setting. I have reset safari. I have re-installed Livedicionary and WebSnapper, but they don't work any more. Any idea about this issue? Is there any tools to verify run-time in which mode Safari is running?
    Thank you.

    G'day Enzo - and welcome to the forums!
    To confirm the mode of an application, simply open Activity Monitor. It will tell you what you need to know.
    Personally, I am running Safari in 64bit mode... and waiting for the developers of 1Password to finally release the updated version that is fully compatible. The benefits of running in 64 bit mode are many!
    Cheers,
    Rodney

  • Why does Safari not automatically open in full screen mode?

    In Yosemite, if I'm in full screen mode, then I close my browser (completely quitting, not just closing the window), then re-open Safari, I am not in full screen mode. The browser corners are pulled to the maximum screen size but I am not in full screen mode.
    Does anyone know a solution to this? Is this a bug or a "feature?"
    Thanks,
    Mason

    I have never used Span before, but inspired by your post, I tried it.
    My results are the same as yours in non-fullscreen mode, but different in full screen mode.
    When I press "F", image 2 appears on monitor A (as you said), but briefly I see image 1 on monitor C, then it blacks out.  Pressing "F" again reveals the two images in their original positions.
    If I select a block of images, but not all the columns of images on monitor B, the images are somewhat randomly assigned to A and C.  When I press F, the images on C move to A, and C blanks out to black.
    Now I know why I have never used Span I think!
    What is the purpose of this thing?! 

  • ITunes only works in 64 bit mode and older movies doesn`t play

    Hello,
    I have ~400 movies, including tv shows and movies, but from the last iTunes updated, I cannot play my library or add news movies, not from iTunes menu ou using iFlicks as always did. And my home sharing didn`t working anymore.
    I read googled about and I think it`s maybe because some issues with  64 bit mode, but iTunes will not working in 32 bit anymore, so what should I do? Any help????

    At Mike Johnson12's suggestion I posted my problem separately at https://discussions.apple.com/message/15801854#15801854 .  The only response I have received there so far is from another person who has experienced the same problem you & I have.  That makes at least 3 of us. Please feel free to hijack my post there if you think it might help!

  • Photoshop CS5 TWAIN plugin not working in 32-bit mode

    I'm having trouble scanning via TWAIN in Photoshop CS5. I'm on an iMac running OSX 10.6.6, My Scanner is an Epson Perfection V350, and after installing the latest driver and an online chat with an Epson rep, they told me to download the latest Photoshop TWAIN plugin from the Adobe site, then run Photoshop in 32-bit mode.
    I tried that and the option to scan finally appeared in the import menu and the Epson Scan interface appeared. However, upon trying to preview or scan, the whole lot crashes.
    The Epson Scan program works as a standalone app, so the problem clearly lies within Photoshop. However I want to scan in Photoshop, not the clunky standalone app!
    Is there anything else to try?

    I would say it's more likely that there is a problem with CS5 and/or the new TWAIN plugin.
    Epson claim that since their application works standalone, than it's not at fault.
    Photoshop CS4 worked fine - I could scan via TWAIN perfectly. I've since removed the CS4 apps. And of course CS5 no longer supports it in the same way. Following Adobe's OWN recommendations of installing the TWAIN plug-in and running PS in 32-bit only led to complete software crashes.
    Of course I can scan in Epson Scan on it's own, but after 15 years of happily scanning via TWAIN in Photoshop, I don't see why I should change my way of working to something that would be less convenient.
    On another post I read something about having the correct TWAIN plugin - I could only find one for CS5 on the downloads page, so I assume I got the right one.

  • Jazz.suit font doesn't work in 64 bit mode

    Ever since the new update, and using 64 bit mode, the jazz fonts disappear. Most of the score stays intact (including events which are generated by any other font, such as jazztext, jazztextextended), but anything which uses the Jazz.suit font simply disappears.
    In 32 bit mode, this doesn't occur.
    I tried to replace my Jazz.suit font and it didn't fix it, and this is happening uniformly on 3 computers I use at work with Logic Pro 9.1. Unchecking use external font if available fixes this (basically doesn't use the jazz.suit font) and Sonata and Swing fonts work (the other choices).
    Any ideas?
    Message was edited by: Lorenzini

    Yea! I'm having the same problem over here!

  • Magic Mouse not working in 64-bit mode

    I just booted up in 64-bit on my new iMac i7, and it seems the magic mouse will not work. I tried to turn it off and on with no luck. Am I missing something??
    Thanks.

    got it working. I had to re-connect it in the BT pane.
    Message was edited by: gr8fl4295

  • Which iTunes plug-ins won't work in 64 bit mode?

    When I open iTunes 11.0.2 on mi iMac (recent upgrade to Mountain Lion) I get the following message:
    I have gone to the info window of iTunes and checked the  box, but it has made no difference.
    Any suggestions! I could, of course, just check "Do not show this message again".

    Yea! I'm having the same problem over here!

  • Keyboard does not work for 64 bit applications

    Hello,
    I hope someone can help me with this strange problem.
    I can not use my keyboard for applications running in 64 bit mode. E.g. Adobe Lightroom 2 or the Chess application that came with the OS.
    When I start up this applications in 32 bit mode everything is working.
    Regards,
    Do lo

    Welcome to the Apple forums:
    I had been using my mouse for the chess game, but I just tried typing
    e2 e4 and it worked. I presume that's what you mean by keyboard
    The activity monitor says it is a 64-bit Intel app.
    It's version 2.3 if that helps.
    Interesting that the voice commands do not work for me. After calibrating and seeing that the test commands work in the calibration window, the command for the chess game all result in a question mark. It hears, it does not understand. Ditto in 32-bit mode.
    Cannot help you with Adobe
    Message was edited by: nerowolfe

  • Changing Safari to 32 Bit mode

    I have seen a few instructions on how to change safari to 32 bit mode.
    Finder>application>safari>get info
    However when I get to the get info, general there are no options for me to change to 32 bit mode. Please help!

    Hi Esquared, Thank you for your answer.
    So if there is a website that only works on 32 bit mode I will be unable to access it with my Mac?

  • Does the ethernet port work when the using airport express in client mode?

    I am considering using an airport express to extend my existing wireless network to a room where I can't get a cable to.
    I will need to connect a at least 3 devices to the airport express.
    The questions are:
    - is an airport express the right answer to this problem?
    - if so, does the ethernet port work (AE on client mode) as a passthru into the main network?
    - can I plug a hub to it?
    Thanks
    RFSF

    Hi Tesserax,
    Really appreciate you taking time to respond.
    I stopped by the Apple store this weekend and one of their sales people ( not one of their genius bar people) told me NO to all questions.  I tend to believe more answers from people in this forum but just realize that I have not mentioned one possibly important point:
    the main AP to which I will be connecting the airport express is not an Airport Extreme/Express AP. 
    Thanks,
    Ricardo.

  • "Open in 32-bit mode" not available

    Two iMacs, (2.66GHz & 1.83GHz), both running 10.6.2. The GET INFO window for SAFARI on the older iMac does not show the checkbox with "Open in 32-bit mode" beside it - the newer iMac does. Other noticeable difference is "Open using Rosetta" is 'active' (available {but not selected]) on the older iMac (Rosetta is installed), whereas it is 'greyed out' on the newer machine (where "Open in 32-bit mode" is available).
    It 'appears' as if, on the miscreant iMac, that Safari IS running in the 32 bit mode whereas iPassword 2 is working fine in Safari - that version of 1Password isn't suppose to work in the 64 bit mode. If this is the case, how do I get SAFARI back to the 64 bit mode.
    Thanks

    HI Jim,
    Open your Activity Monitor application. (Applications/Utiities) and select My Processes from the pop up menu.
    You can view which apps run in 32 or 64-bit mode under Kind on the right.
    If you don't run Safari in 32 bit mode, Safari is likely to crash and freeze. So your iPassword 3rd party app should be ok.
    Carolyn

  • Do not upgrade to an IvyBridge processor if you need to boot into 32-bit mode with Lion

    I recently upgraded to a MBP running the Ivybridge processor and tried to boot into 32-bit mode.  Although it did boot after a short period (3-5 mins) it totally crashed a locked up.  This was precursored by a graphics error and then the mouse cursor could be moved but nothing else could be done and it was only solved by a hard shut down (holding down the power button).  Previously I had been running a MBP with the Sandybridge architecture and this booted fine into 32-bit mode and worked without a problem.
    I spent a lot of time on the phone with Apple care who said they'd not had any reports of this issue and we went right though my system until they said there was nothing else they could do and I should try a re-install of Lion.  I did this onto another hard-drive, booted into it and managed to get the machine to crash again... leading me to understand that it's nothing to do with my setup.
    Thinking it might be an issue with my firmware on the mac today I visited an Apple store and tried booting 5 MacBook Pro's and a MacBook Air - all running IvyBridge - into 32-bit mode and managed to cause the same crash on all of them.  If the machine is just booted an left with finder it didn't seem to want to crash but when I opened programs, mainly mac mail, it didn't take too much longer for the crash to occur.
    If there are any Apple engineer reading this could you try and reproduce the issue and look at fixing this please as a lot of people still use 32-bit and if I'd known that the IvyBridge processors weren't going to work in 32-bit mode I would have stayed with the Sandybridge MBPs.
    Many Thanks,
    Adam Peters,

    That is a pain then.  Pretty much all of the OS included applications (finder, Mail, iTunes, Safari,...) are all fully 64-bit programs now (since Lion) so I can see where launching them when booted into 32-bit mode could cause stability issues.
    If you boot into 32-bit mode and just run the Tascam software without launching anything else, will it work?
    Was it alright in 10.6? And if so, how about keeping 10.6 in a virtual machine or on a separate disc or partition?

Maybe you are looking for

  • ORA-27101: shared memory realm does not exist after kernel upgrade

    Hi, I have installed ECC 6.0 on windows 32 bit.  After I upgraded the kernel, the database can't be started as well as SAP.  When I checked the logs, the error ORA-27101: shared memory realm does not exist was encountered. M  calling db_connect ... C

  • File to IDOC Scenario: where to import the idoc structure?

    Dear all, I have a short organizational question for you all. I have created a scenario where the MDM server places a file in a FTP directory and XI will take it from there for processing to IDOC towards the SAP system. During design time I need to i

  • Using 'personal hotspot' successfully - any ideas for making it work?

    I signed up for a 'personal hotspot' on my Verizon iPhone4 months ago but find that it rarely works.  Have others been able to make it work?  Any ideas on how I can use it successfully?  I am using it in New York City.

  • Converting Crystal reports to Oracle D2K reports or BI Publisher

    Hi I have one requirement I need to convert crystal reports to oracle D2k reports is there any tool which will make my work easier any body who has work on it please suggest. Thanks in advance Edited by: Qwerty on Jul 9, 2010 12:44 PM

  • Error in Oracle XML demo

    HI Gentlemen, I executed the XML demo procedure that creates a CLOB and from this populates XMLDemoTable. Every step described was correctly executed, i e package installation, SOURCE_DIR creation etc. However, I always get ORA-31000: Ressource 'acco