Does Safari have issues with Java?

When I log into my IG Index financial spread betting account safari usually quits unexpectedly immediately after the dealing screen has loaded. This is causing me huge frustration. The site relys a lot on Java. I believe there were issue with Java in Mac OS 10.3.9 that may still exist on 10.4.X
Any ideas?

Do you have the latest versions of Java installed?
Have you enabled Java in Safari's preferences?

Similar Messages

Does anyone have issues with start up time

does anyone have issues with start up time

Have you tried a reset?
Press & hold both Home & Power until you see the Apple logo.
If that doesn't fix it, restore it as new and see if that fixes it.

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?

Only concrete way is to use it less sorry see here every method possible has been tried
https://discussions.apple.com/thread/4329696?start=2970&tstart=0

Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

Photo Stream only handles images and your videos are not uploaded or shared with other devices.
Use iPhoto to import from your device. It can bring in the videos and image files.

Hi, does anyone have issues with the Camera app uploading photos to the photo album? This happens after I downloaded iOS8.1.2

I have just updated my iPhone iOS to 8.1.2. Since then, the camera is not able to upload photos to the album immediately and some are even lost. Does anyone have the same issue or know how to fix this?

I found it much easier to have my apps on the last page and let the pre-loaded apps stay where they are on the first couple of pages. While I'd prefer to have my apps first, at least they are all together. I found it far too much work to try to move them around another way, plus it shifts some things around in a way that I did not intend.
BTW, I definitely prefer the Fascinate's arrangement of the icons over the Droid X2, which is always in alphabetical order in a vertical non-stop continuum.

Does anyone have issues with the instrument library?

I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?

Just loaded the 6.0.2 update a few days ago. I was hoping it would fix the dropping of wifi where the 4g and 3g always kept. I have restored the router and I have even switched towers through AT&T's help, but to no avail. I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again. I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as being in my home most of the time. I am planning to take into AT& T store for a new one, just not happy with the wifi situation. It is sad that this cannot be fixed with an update. I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those. I hope At&T and Apple are reading these dialogs. Please let me know if fixes are on the way!

Does PCI6534 have issues with power on io's and host cpu not powered

Are there any issues with the PCI6534 when the io has power applied and one boots the host CPU?

Hello;
I couldn't understand exactly what you meant by that.
I'm assuming you are asking if you will damage the board in case the I/Os are active and the CPU is turned off. If that is the question, the answer is no, you won't damage the DAQ device.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Does anyone have issues with Windows 7 and Acrobat 8 Pro

I am using Windows 7 and Acrobat 8 Professional. I have 3 installs that work great but 1 that keeps getting a flashing box the size of a popup and then the entire machine freezes up and requires a reboot to work at all. The flashing box is so fast, I cannot read and data on it and as no other programs or software will function at the crash, I am not sure how to troubleshoot. I did a repair, no help. I uninstalled and reinstalled but again, no help......Any tips would be appreciated... Thanks all,

You should be able to move the problem plugin from the plugin folder of Acrobat to a temporary folder and see how it runs. You also did not indicate if it was a 64 bit version of Win7. If the latter, be sure to update Acrobat (should do that anyway). Several folks have been successful with Win7 X32, but I am not sure about X64. Often the updates will fix most of the problems and are even recommended in XP.

Does anyone have issues with iOS 5.1.1?

My iPod Touch 4G is running (I say running, It's actually imitating a slug on sleeping pills) iOS 5.1.1. It normally crashes (Goes into recovery mode) about once a week. For an example, when I wake up, I check the time; and it won't even open when I press the home or sleep buttons. Then it will kick into the much-loved pre-crash loading screen. Sometimes it will snap out of it's trance, other times, I will let it sit for a half-hour or so, and when I come back, I find myself staring at the iTunes logo in rage -_- So I'm wondering if this is a known problem with 5.1.1, or If I recieved a device with a bad OS or hardware.

I personally have an iPod Touch running on iOS 5.1.1 and have no such problems. However, I do notice my iPod is running slower, and will freeze, though it's rare, maybe once a month or so.
May I suggest formatting your iPod?

Does anybody have issues with the weather?

My phones weather app says the sun rises at 1am and sets around noon when clearly it's still night time at 1am and the sun is out at noon...***??!?!

Hei thanks about the messages. I didn't know about dellfand. I would try if only the system would still be broken.
somehow it has happened again the same thing that happened the last time (I hope - give me a couple of days to verify the system is stably ok)
I installed i8kutils and i8kmon, played a bit with the i8kmon.conf settings and then out of desperation removed i8kmon, removed i8kmon from the daemons in rc.conf but left i8k in the modules in rc.conf. Somehow now the fans do not behave like before... they still fan very conservatively (almost at full speed with temperatures of 50 degrees) but it is immeasurably better than the alternating madness I had before.
I'll keep you updated
P.S. regarding the bios it might be because I have refreshed the bios with the latest version just after I bought it. Looking at the version number it was quite an update...
Cippa

Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro

Hi Guys and Gals.
Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
Regards,
Jase

Well, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not. They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job. I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
Two and a bit years is a long time in tech terms.
Stephen
eni wrote:
I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result?

Does anyone else have issues with charging the 4? Both my daughter and I are experiencing issues.

Does anyone else have issues with charging the 4? Both my daughter and I are experiencing issues.

HLDkro wrote:
our original ones got frayed and no longer work. Been buying USB charges from my local pharmacy.. Need a new one every 2-3 weeks. I went to Verizon and bought a compatable one and right now I have my phone balanced on the garbage can with the cord strategically placed for it to charge. The USB does not work pluged into a wall, however, the same cord does work in my car.
" I have my phone balanced on the garbage can with the cord strategically placed for it to charge."
Makes it sound like the charging port is damaged or loose.

Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.

Jon....
Don't confuse the threads here with 'typical' experience. Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
If you are having repeated crashes it is really pretty basic. You either have a physical problem with your pad, or you are using too much memory.
The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now. That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.
This happens, more often than not, when using safari with multiple windows open on graphic intense sites. It can also happen with a memory intensive game, and residual apps in the background.
Double tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
If the problem persists, you may have a software issue, and a trip to the genius bar may be in order.

Hot mail is not working after firefox upgrade. I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week .

I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week after firefox upgrade. After entering login the page freeze. I am not able to continue.
I reviewed the thread. I am not using Foxit.
I reviewed hot mail forum. They suggest firefox upgrade causes this issue.
I tried after clearing my browser's cache and cookies. The situation remain same. Any idea?
What is the workaround?

Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22

Photoshop cs6 won't allow me to highlight my existing text layers. Does anyone have experience with this problem?

Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?

Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
http://www.adobe.com
Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
Cheers
Don

Does Safari have issues with Java?

Similar Messages

Maybe you are looking for