Does Safari run in Windows Server 2008 R2 (Terminal Services)?

does Safari run in Windows Server 2008 R2 (Terminal Services)?

Hi Jess,
Here are two things I suggest you check:
The Monitoring interval is set to 900 minutes, would the profile size get reduced after 15 hours and run
gpupdate/force?
Since the Sessenv.dll version is higher than the ones described in KB 2575946, the issue is supposed to be fixed. I suggest you run System File Checker to scan all protected system files.
In addition, you can also collect Gpsvc.log to determine if policies are applied successfully.
More information for you:
System File Checker (sfc)
http://technet.microsoft.com/en-us/library/bb491008.aspx
Group Policy not being applied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9884d06d-b5f8-44c9-a703-7b5211f1e0ba/group-policy-not-being-applied?forum=winserverGP
Best Regards,
Amy

Similar Messages

32-bit executable does not run in Windows Server 2008

Hi,
Sorry if this question has been asked already. I am having trouble finding a solution in the NI knowledge base and here in the forums.
I just created a simple UI standalone application in Labwindows/CVI with UI. It runs perfectly in XP when it was developed. When I ported this over to the Windows Server 2000 target and tried to run it, it is stuck in a Windows console and will not spawn main(). I tried both rebuilding it on the 64-bit machine as well as just running the exe as is, yielding the same results. I also tried running corflags against the exe on both the 32-bit dev machine and the 64-bit target but both output says "The specified file does no thave a valid managed header", which seems to be true for all CVI exe files.
Through some troubleshooting, I was able to narrow it down to a call to a function in a dll (that apparently has already been working all along). If I comment out the two calls, main() would start and life is good again. I tried visually looking through the code in the project producing the dll and things are fine.
Can someone provide me with some insight into how to proceed on this? Was it a bad build? Did I not configure the build environment correctly (I already tried changing the stack/heap usage)? Could this be caused by a bug in the software that the compiler didn't catch? What typically causes a freeze in the console that spawns main()?
Please help! Thanks in advance!
EDIT: BTW, I'm running LabWindows/CVI 2009 on both machines.

One other possibility is having sufficient rights, especially if you are invoking it via some other app, rather than manually as a logged in user. If you are not logged in and instead invoke it via a web site action, I believe you will have problems reading the registry, accessing a desktop, writing to disk, etc.
Sorry I can't be more definitive, but perhaps it will help.
Please post your conclusion, if you find it.
--Ian

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Add does not run with sql server 2008

Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
Pradnya

Hi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul

Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

   Hello to all, there are two confliting articles about this topic:
   1-
http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
Server 2008 R2 domains". This article was updated in 2013.
   2-
http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
2010 and was refered by the first one.
   What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
   Regards, EEOC.

Hi,
I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
However, the best method for you is make a lab to test the problem firstly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

PowerShell Script running Excel won't run on Windows Server 2008 R2

I have a script that creates a report of a single example of each warning or error in the Windows Event log, for each server in a list of servers,with the number of times that error has occurred in the last week on each server. It creates this report in
Excel. I have this script running automated through Task Scheduler for one client on Windows 7 and it's working perfectly. I have another client that I am attempting to run this script automated on a server running Windows Server 2008 R2. I can manually run
the script and everything works, but if I try to schedule the script everything works except for the Excel PowerShell commands. I've have tried:
Created the Desktop folders for config\systemprofile in System32 and in SysWOW64.
Configured permissions in DCOM for Microsoft Excel Application.
Configured folder permissions for config\systemprofile.
Verified PowerShell is working.
Unchecked the option in the task to only run while logged on.
Does anyone have any idea why this is happening and how I can fix it? Thanks!
Sincerely,
Christopher Beard

You might have to launch the application once as the system account so that it can set up the Excel environment, I've had the same problem when trying to update Excel files from an admin Powershell console using my admin account. Use psexec with
a -s option to run it as system account locally while logged on to the target server:
psexec -s "c:\program files (x86)\microsoft office\office14\excel.exe"
Then you'll most likely be prompted to input initials - which is what I suspect is preventing your code from running properly.
There may be some other more elegant way to handle this, but you'd be better off asking that question in one of the forums devoted to Office products.
I hope this post has helped!

Is anyone having trouble with itunes running on Windows server 2008?

We use to have iTunes running on a Dell desktop box that was acting as our file server for years. I upgraded both our hardware to a Dell Pwoeredge server running Windows Server 2008 RS and now I'm finding that iTunes will only stay running for about 3 days. It stops running and has to be force quit and then restarted to get songs playing again. Does anyone know why this is happening and how I can stop it for happening in the future? We use iTunes based music for our on-hold music for our phone system and for in-store ambiance music.
Kirk

We use to have iTunes running on a Dell desktop box that was acting as our file server for years. I upgraded both our hardware to a Dell Pwoeredge server running Windows Server 2008 RS and now I'm finding that iTunes will only stay running for about 3 days. It stops running and has to be force quit and then restarted to get songs playing again. Does anyone know why this is happening and how I can stop it for happening in the future? We use iTunes based music for our on-hold music for our phone system and for in-store ambiance music.
Kirk

Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: ‎2/‎12/‎2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: ‎2/‎12/‎2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipe

Hi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support

Cisco Security Manager Client running on Windows Server 2008 R2 (64 bit) in Terminal Service

Hello CSM Gurus,
Would there be any performance issues in CSM client software design if multiple instances of CSM client by multiple users ran concurrently on a Windows Server 2008 R2(64 bits) while CSM users accessing the server via Remote Desktop Services ?
In my environment, we have a CSM server at our major data center while security administrators from all over the world need to use this CSM server.
In order to overcome the latency of the CSM client due to the WAN network, the plan is to use a Windows Server 2008 R2(64bits) as a terminal server and all security administrators would need to access this terminal server via RDP and would launch CSM client on their desktop. The terminal server locates on the same LAN as the CSM server itself in order to minimize network latency in communications between the CSM clients running on the terminal server and the CSM server. there would be multiple instances of CSM clients running concurrently on the Windows Server 2008 R2, the terminal server.

Hi;
please check
Oracle Database 11g Release 1 (11.1.0.7.0) <<Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win64_2008soft.html
Check Database 11g Release 2 Certification Highlights [ID 1065024.1]
But please check this thread
client 11gR2 install on Win 7 Pro fails java.lang.NullPointerException
Regard
Helios
Edited by: Helios- Gunes EROL on May 14, 2010 4:49 PM

Adobe Acrobat 8.10 running on Windows Server 2008

I have installed Windows Server 2008 64 bit + updates and now tried to install Acrobat Professional 8.10.
Everything installed without any errors. However i dont seem to find a print driver for Distiller? Usually on other versions i had a Distiller printer installed automatically but strangely i cant find it. I tried to install it manually but got a bit lost and wondered if anyone can point me to the right direction?
Thanks

It may be worth mentioning that, with a few exceptions, it's generally
considered that Acrobat is not for use on a server (see the EULA).
Products you might like to look into include
* Distiller Server
* LiveCycle PDF Generator
Aandi Inston

Windows Server 2008 R2 DNS service issue with BitLocker

I recently installed BitLocker on a Windows Server 2008 Platform. I did not encrypt the boot partition because the server hardware BIOS did not have the necessary requirements to encrypt the system drive.
The Server roles are ADSM, DC and File Server. For DC operation I am also running the DNS service.
When I installed the DNS role I was prompted to install the Log files on a different volume than the OS. I did this, but unfortunately, it was the same volume that was encrypted.
Since I could not encrypt the system disk, the encrypted volume must be unlocked via password in order to mount. Here in lise my problem.
When I do a full reboot of the server, I get to the point in the boot process where my mouse is visible and operational (this would be just before the Windows OS logo displays, I believe), then the server reboots. On the next boot up I am given the diagonstics
and recovery dialog because the OS failed to boot.
I believe the failure is the DNS service trying to launch, but because the log files are on the encrypted drive and it has not been unlocked, the system sees this as a security problem and reboots
Does this make sense? If it does, is there a way to boot 2008 R2 with the DNS service disabled, say with the original install disk in recovery mode?
Any help would be greatly appreciated as this system cannot be booted in its current state.
Peter C. Hesse Network/Systems Administrator

Hi,
I believe you mean the Active Directory Logs not the DNS logs, because these are necessary to startup a domain controller, because the AD database depends on these logs.
So if you have AD logs on a different partition and that is encrypted with Bitlocker you could probably automatically unlock it.
So you did not encrypt OS partition because the server does not have a TPM fully compliant chip ?
manage-bde /?
manage-bde -autounlock -enable Driveletter:
But you have to be able to boot server normal mode I am not sure if the command can be used in DSRM mode.
Below are some links that might help:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c52ffc7d-f822-4b61-b633-46f8e04eac80/bitlocker-for-domain-controller
Hope this helps.
Regards,
Calin

Windows Server 2008 R2 - Fax service fails daily.

Hi,
We are experiencing a daily crash of the fax service on Windows Server 2008 R2.
We have installed the hotfix as mentioned here: http://support.microsoft.com/kb/973640 but still getting daily crashes.
Someone mentioned here that Microsoft wrote a code injection application that fixed it but I can't find that anywhere.
Any help appreciated.
Thanks
Event 1000
Faulting application name: fxssvc.exe, version: 6.1.7600.20788, time stamp: 0x4c75f01a
Faulting module name: cdosys.dll_unloaded, version: 0.0.0.0, time stamp: 0x4a5bde95
Exception code: 0xc000041d
Fault offset: 0x000007fedb5fd258
Faulting process id: 0x3124
Faulting application start time: 0x01cbee176ffb3077
Faulting application path: C:\Windows\system32\fxssvc.exe
Faulting module path: cdosys.dll
Report Id: fff4e925-5a0c-11e0-821f-002564fcea0f
Event 1001
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: fxssvc.exe
P2: 6.1.7600.20788
P3: 4c75f01a
P4: cdosys.dll_unloaded
P5: 0.0.0.0
P6: 4a5bde95
P7: c000041d
P8: 000007fedb5fd258
P9:
P10:
Attached files:
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBAD4.tmp.appcompat.txt
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBAF4.tmp.WERInternalMetadata.xml
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBB05.tmp.hdmp
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\WERBC1F.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_fxssvc.exe_89b8f5e86df31f4ed956a0a2c86825db0c72af9_cab_56f4bd34
Analysis symbol:
Rechecking for solution: 0
Report Id: fff4e925-5a0c-11e0-821f-002564fcea0f
Report Status: 4

Hi,
Thanks for the post.
We may have to analyze memory dump file to narrow down the cause of this issue, forum is not the best place for analyzing dump. It’s suggested to contact Microsoft Customer Support Services (CSS) so that a dedicated Support Professional can help you
on this issue.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US please see http://support.microsoft.com for regional support phone numbers.
Thanks,
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
Bjorn

Hi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Update windows server 2008 r2 to service pack1

how we can update the windows server 2008 r2 to windows server 2008 r2 service pack 1
with consideration that I already have active directory in this server
i don't find any documentation for updating windows server 2008 R2 to windows server 2008 r2 service pack 1

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Windows Server 2008 r2 File service and Storage File opened by "another user"

When I was using Windows server 2003 it show files opened by "user's name" but after changing to windows server 2008 r2 it only shows File opened by "another user" this is a hug problem in our organization which has around 200 staff's
sharing files, and dont know who has opened file,
We administrator can see and close opened file from "Manage opened files" but we want users also to see who has opened current file they are using instead of showing opened by another user displaying the user's name of the file opened.
Can anyone help me with this problem,
Thank you in Advance,

Hi,
I tried on a Windows 2008 R2 system and here is the result.
Here "2" is a standard domain user so it could be displayed correctly.
I would like to know if the issue specifically occurs on Office files? If so it could be an Office issue instead of system related. You can try one of the following 2 files:
Excel 2007 - http://support.microsoft.com/kb/2598133
Excel 2010 - http://support.microsoft.com/kb/2598143
If you have any feedback on our support, please send to [email protected]

Does Safari run in Windows Server 2008 R2 (Terminal Services)?

Similar Messages

Maybe you are looking for