Does SAP direct input programs have authorization checks built-in?

Can anyone advise if the SAP direct input programs eg. RFBIBL00, RMDATIND, RCCLBI03, RM60IN00, RVINVB10 etc. have authorization checking features?
In transaction BMV0, there is a value for User Name. If the user executes the direct input job from here, but uses a different User Name in the job definition in BMV0, does that mean that the authorization check is done against the User Name maintained instead?
Kindly advise asap, thanks.

Hi Li,
This is what the SAP Doucmentation says about the USer name that is maintained in BMV0 transaction.
" User name in user master record
Background processing takes place under this user name. This person
 needs to have the application-specific authorizations necessary for
 running the direct input job (for example, all material master
 authorizations).
If you do not enter a name, the job will run under the user name of the
 person scheduling it. "
Regards,
Ravi

Similar Messages

Direct Input Programs in SAP

Hi,
Can anybody provide me the list of Direct Input programs available in SAP.
Thanks,
Sunil.

hI,
Direct Input:
A recent technique to input data safely. An alternative to batch input.
With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with help of the screens. This means that direct input has considerable performance advantages. But there are a few programs for direct input, you can use them if it accomplishes your goal. Direct Input programs work like that they update database tables directly. As you know that it is forbidden to update SAP database tables directly, since consistency and security should be considered. Exceptions are these direct input programs. So you are not able to write custom ABAP direct input programs. But of course you can write ABAP programs to update custom database tables (Z tables), if you are sure all about consistency.
SAP has created direct input programs because SAP wanted to enhance the batch input procedure, since batch input is slower. SAP offers the direct input technique, especially for transferring large amount of data. In contrast to batch input, this technique does not create sessions, but stores, updates, inserts data directly. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or transaction BMV0.
Examples for direct input programs are:
RFBIBL00 - FI
RMDATIND - MM
RVAFSS00 - SD
RAALTD11 - AM
RKEVEXTO - CO-PA
Regards
Kiran Sure

Problem with direct input program while uploading data into database

TABLES: BGR00, " Mappensatz
 BMM00, " MM01/MM02 BTCI-Kopfdaten
 BMMH1, " MM01/MM02 Hauptdaten
 BMMH2, " Länderdaten (Steuern)
 BMMH3, " Prognosewerte
 BMMH4, " Verbrauchswerte
 BMMH5, " Kurztexte
 BMMH6, " Mengeneinheiten
 BMMH7, " Langtexte
 BMMH8. " Referentielle EAN's
 Satztypen
DATA: MAPPENSATZ LIKE BMM00-STYPE VALUE '0',
 KOPFSATZ LIKE BMM00-STYPE VALUE '1',
 HAUPTSATZ LIKE BMM00-STYPE VALUE '2',
 KUN_SATZ LIKE BMM00-STYPE VALUE 'Z',
 LANDSATZ LIKE BMM00-STYPE VALUE '3',
 PROGSATZ LIKE BMM00-STYPE VALUE '4',
 VERBSATZ LIKE BMM00-STYPE VALUE '5',
 KTEXTSATZ LIKE BMM00-STYPE VALUE '6',
 MESATZ LIKE BMM00-STYPE VALUE '7',
 TEXTSATZ LIKE BMM00-STYPE VALUE '8',
 EANSATZ LIKE BMM00-STYPE VALUE '9'.
Common Data Bereich fuer die extern aufgerufenen Routinen
 Initialstrukturen
DATA: BEGIN OF COMMON PART RMMMBIMY.
DATA: BEGIN OF I_BMM00.
 INCLUDE STRUCTURE BMM00. " Kopfdaten
DATA: END OF I_BMM00.
DATA: BEGIN OF I_BMMH1.
 INCLUDE STRUCTURE BMMH1. " Haupdaten
DATA: END OF I_BMMH1.
DATA: BEGIN OF I_BMMH2.
 INCLUDE STRUCTURE BMMH2. " Länderdaten
DATA: END OF I_BMMH2.
DATA: BEGIN OF I_BMMH3.
 INCLUDE STRUCTURE BMMH3. " Prognosewerte
DATA: END OF I_BMMH3.
DATA: BEGIN OF I_BMMH4.
 INCLUDE STRUCTURE BMMH4. " Verbrauchswerte
DATA: END OF I_BMMH4.
DATA: BEGIN OF I_BMMH5.
 INCLUDE STRUCTURE BMMH5. " Kurztexte
DATA: END OF I_BMMH5.
DATA: BEGIN OF I_BMMH6.
 INCLUDE STRUCTURE BMMH6. " Mengeneinheiten
DATA: END OF I_BMMH6.
DATA: BEGIN OF I_BMMH7.
 INCLUDE STRUCTURE BMMH7. " Textzeilen
DATA: END OF I_BMMH7.
DATA: BEGIN OF I_BMMH8.
 INCLUDE STRUCTURE BMMH8. " Referentielle EAN's
DATA: END OF I_BMMH8.
DATA: END OF COMMON PART.
DATA: WA LIKE TEDATA-DATA.
 Einzelfelder
DATA: GROUP_COUNT(6) TYPE C, " Anzahl Mappen
 TRANS_COUNT(6) TYPE C, " alte Definition für rmmmbim0
 SATZ_COUNT LIKE MUEB_REST-TRANC, " Trans.zähler neu
 H_IND_COUNT LIKE MUEB_REST-D_IND, " Index welches Feld zurücks.
 SATZ2_COUNT(6) TYPE C. " Anz. Sätze je Trans. ohne Kopfsatz
DATA: XEOF(1) TYPE C, " X=End of File erreicht
 XHAUPTSATZ_EXIST TYPE C, " X=Hauptsatz zum Kopf exi.
 NODATA(1) TYPE C. " kein BI für dieses Feld
mk/15.08.94:
DATA: GROUP_OPEN(1) TYPE C. " X=Mappe schon geöffnet
*eject
 Konstanten
DATA: C_NODATA(1) TYPE C VALUE '/'. " Default für NODATA
DATA: MATNR_ERW LIKE MARA-MATNR VALUE '0 '.
DATA: MATNR_ERW_INT LIKE MARA-MATNR. "internal sight of '0 '
DATA: MATNR_LAST LIKE MARA-MATNR. "Material number
mk/11.08.94 2.1H:
If this flag is initial, the database updates will be done directly
during background maintenance instead of using a separate update
task. (no usage of this flag in dialogue mode!)
DATA: DBUPDATE_VB(1) VALUE ' '. "note 306628
data: matsync type mat_sync. "wk/99a no update in dialog if called
***INCLUDE ZMUSD070.
TABLES: MARA, "Material Master: General Data
 MARC, "Material Master: C Segment
 MARD, "Material Master: St Loc/Batch
 MBEW, "Material Valuation
 MVKE, "Material Master: Sales Data
 MLGN, "Material Data per Whse Number
 MLAN, "Tax Classification: Material
 T001W, "Plants/Branches
 TBICU.
DATA: BEGIN OF VALUTAB OCCURS 0.
 INCLUDE STRUCTURE RSPARAMS.
DATA: END OF VALUTAB.
DATA: BEGIN OF VARTECH.
 INCLUDE STRUCTURE VARID.
DATA: END OF VARTECH.
DATA: PARMS LIKE ZXXDCONV.
DATA: REC_COUNT TYPE I,
 REC_COUNT_BAD TYPE I,
 ZJOBID LIKE TBIZU-JOBID,
 ZJOBCOUNT LIKE TBIZU-JOBCOUNT,
 ZMATNR LIKE MARA-MATNR,
 ZTEXT(80) TYPE C.
CONSTANTS: LIT_ZERO(18) TYPE C VALUE '000000000000000000',
 LIT_CHAR TYPE C VALUE '_',
 LIT_CREATE LIKE BMM00-TCODE VALUE 'MM01',
 LIT_CHANGE LIKE BMM00-TCODE VALUE 'MM02',
 LIT_CHECK(1) TYPE C VALUE 'X'.
DATA: BEGIN OF INP_DATA OCCURS 0,
 MATNR(18) TYPE C, " Material code
 UMREN(6) TYPE C, " Denominator
 MEINH(3) TYPE C, " Alternate UOM
 UMREZ(6) TYPE C, " Numerator
 END OF INP_DATA.
*eject
SELECTION-SCREEN BEGIN OF BLOCK INOUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (13) TEXT-004.
PARAMETERS: P_PC RADIOBUTTON GROUP SRC DEFAULT 'X'.
SELECTION-SCREEN COMMENT (6) TEXT-005.
PARAMETERS: P_UNIX RADIOBUTTON GROUP SRC.
SELECTION-SCREEN COMMENT (6) TEXT-006.
PARAMETERS: P_DS_TYP LIKE ZXXDCONV-DS_TYP
 DEFAULT 'ASC'.
SELECTION-SCREEN END OF LINE.
*SELECT-OPTIONS: S_PATH FOR PARMS-PATH
 NO INTERVALS
 LOWER CASE.
PARAMETERS: P_PATH TYPE RLGRAP-FILENAME.
PARAMETERS: P_HDRLIN LIKE ZXXDCONV-HDR_LINES
 DEFAULT 0,
 P_JOBNAM LIKE TBICU_S-JOBNAME
 MEMORY ID BM1,
 P_DI_EXE AS CHECKBOX
 DEFAULT LIT_CHECK,
 P_MAPPE LIKE BGR00-GROUP
 DEFAULT 'MRP_UOM_LOAD'
 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK INOUT.
*eject
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 PROGRAM_NAME = SYST-REPID
 DYNPRO_NUMBER = SYST-DYNNR
 FIELD_NAME = 'P_PATH'
 CHANGING
 FILE_NAME = S_PATH-LOW
 FILE_NAME = P_PATH
 EXCEPTIONS
 MASK_TOO_LONG = 1
 OTHERS = 2.
AT SELECTION-SCREEN.
Set up parameter record
PARMS-UNIX = P_UNIX.
PARMS-PC = P_PC.
PARMS-DS_TYP = P_DS_TYP.
PARMS-JOBNAME = P_JOBNAM.
PARMS-MAPPE = P_MAPPE.
PARMS-HDR_LINES = P_HDRLIN.
*eject
 Main Processing Routine *
START-OF-SELECTION.
Initialization
PERFORM 0000_HOUSEKEEPING.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
Process input files
SORT S_PATH BY SIGN OPTION LOW.
 MOVE S_PATH-LOW TO PARMS-PATH.
 MOVE P_PATH TO PARMS-PATH.
LOOP AT S_PATH.
 AT NEW LOW.
 CLEAR INP_DATA.
 REFRESH INP_DATA.
Read source data into internal table
 PERFORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
Processs each record in internal table
 ZTEXT = TEXT-007.
 ZTEXT+13 = PARMS-DS_NAME.
 PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
 LOOP AT INP_DATA.
Reset tables for each record
 BMM00 = I_BMM00.
 BMMH1 = I_BMMH1.
 BMMH6 = I_BMMH6.
Load structures with data
 MOVE-CORRESPONDING INP_DATA TO BMM00.
 PERFORM 2000_WRITE_OUTPUT USING BMM00.
 MOVE-CORRESPONDING INP_DATA TO BMMH1.
 PERFORM 2000_WRITE_OUTPUT USING BMMH1.
 MOVE-CORRESPONDING INP_DATA TO BMMH6.
 PERFORM 2000_WRITE_OUTPUT USING BMMH6.
 REC_COUNT = REC_COUNT + 1.
 ENDLOOP.
 ENDAT.
ENDLOOP.
IF REC_COUNT GT 0
AND P_DI_EXE EQ LIT_CHECK.
 PERFORM 3000_START_DI_JOB.
ENDIF.
WRITE: / TEXT-008,
 REC_COUNT.
PERFORM 9000_END_OF_JOB.
*eject
Include containing common routines used by direct input programs
INCLUDE ZMUSD071.
*eject
 FORM 0500_INIT_BMM00 *
 Initialize I_BMM00 with transaction code and views selected *
FORM 0500_INIT_BMM00.
***this changes done by samson**
if not inp_data[] is initial.
select single matnr from mara INTO ZMATNR where matnr = inp_data-matnr.
if sy-subrc = 0.
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
else.
I_BMM00-TCODE = LIT_CREATE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
endif.
endif.
**this changes above done by samson**
Transaction code
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
ENDFORM.
INCLUDE ZMUSD069.
*eject
 FORM 0000_HOUSEKEEPING *
 Initialization routines *
FORM 0000_HOUSEKEEPING.
PERFORM 0010_LDS_NAME.
PERFORM 0020_DS_NAME.
PERFORM 0030_OPEN_FILE.
PERFORM 0040_INIT_STRUCTS.
ENDFORM.
*eject
 FORM 0010_LDS_NAME *
 Obtain logical file name from DI job details *
FORM 0010_LDS_NAME.
Check valid job name
SELECT SINGLE * FROM TBICU
 WHERE JOBNAME EQ PARMS-JOBNAME.
IF SY-SUBRC EQ 0.
 CALL FUNCTION 'RS_VARIANT_VALUES_TECH_DATA'
 EXPORTING
 REPORT = TBICU-REPNAME
 VARIANT = TBICU-VARIANT
 IMPORTING
 TECHN_DATA = VARTECH
 TABLES
 VARIANT_VALUES = VALUTAB
 EXCEPTIONS
 VARIANT_NON_EXISTENT = 1
 VARIANT_OBSOLETE = 2
 OTHERS = 3.
 IF SY-SUBRC EQ 0.
 READ TABLE VALUTAB WITH KEY 'LDS_NAME'.
 MOVE VALUTAB-LOW TO PARMS-LDS_NAME.
 ELSE.
 MESSAGE I001 WITH PARMS-JOBNAME.
 MESSAGE A099.
 ENDIF.
ELSE.
 MESSAGE I000 WITH PARMS-JOBNAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 0040_INIT_STRUCTS *
 Initialize structures for direct input records *
FORM 0040_INIT_STRUCTS.
Start of standard SAP initialization from example program RMMMBIME
*------- Write session record -
CLEAR BGR00.
BGR00-STYPE = MAPPENSATZ.
BGR00-GROUP = PARMS-MAPPE.
BGR00-NODATA = C_NODATA.
BGR00-MANDT = SY-MANDT.
BGR00-USNAM = SY-UNAME.
BGR00-START = BGR00-NODATA.
BGR00-XKEEP = BGR00-NODATA.
PERFORM 2000_WRITE_OUTPUT USING BGR00.
*----- Initialize structures -
NODATA = BGR00-NODATA.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RMMMBIMI) USING NODATA.
End of standard SAP initialization from example program RMMMBIME
ENDFORM.
*eject.
 FORM 3000_START_DI_JOB *
 Start direct input job *
FORM 3000_START_DI_JOB.
ZTEXT = 'Starting '(021).
ZTEXT+9 = TBICU-JOBNAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
CALL FUNCTION 'BI_START_JOB'
 EXPORTING
 JOBID = ' '
 JOBTEXT = TBICU-JOBNAME
 REPNAME = TBICU-REPNAME
 SERVER = TBICU-EXECSERVER
 VARIANT = TBICU-VARIANT
 NEW_JOB = 'X'
 CONTINUE_JOB = ' '
 START_IMMEDIATE = 'X'
 DO_NOT_PRINT = 'X'
 USERNAME = SY-UNAME
 IMPORTING
 JOBID = ZJOBID
 JOBCOUNT = ZJOBCOUNT
 EXCEPTIONS
 JOB_OPEN_FAILED = 1
 JOB_CLOSE_FAILED = 2
 JOB_SUBMIT_FAILED = 3
 WRONG_PARAMETERS = 4
 JOB_DOES_NOT_EXIST = 5
 WRONG_STARTTIME_GIVEN = 6
 JOB_NOT_RELEASED = 7
 WRONG_VARIANT = 8
 NO_AUTHORITY = 9
 DIALOG_CANCELLED = 10
 JOB_ALREADY_EXISTS = 11
 PERIODIC_NOT_ALLOWED = 12
 ERROR_NUMBER_GET_NEXT = 13
 OTHERS = 14.
IF SY-SUBRC EQ 0.
 WRITE: / 'Direct input job'(022), TBICU-JOBNAME, 'started'.
ELSE.
 WRITE: / 'Direct input failed with return code'(023), SY-SUBRC.
ENDIF.
FORM 0020_DS_NAME.
CALL FUNCTION 'FILE_GET_NAME'
 EXPORTING
 CLIENT = SY-MANDT
 LOGICAL_FILENAME = PARMS-LDS_NAME
 OPERATING_SYSTEM = SY-OPSYS
 IMPORTING
 FILE_NAME = PARMS-DS_NAME
 EXCEPTIONS
 FILE_NOT_FOUND = 1
 OTHERS = 2.
IF SY-SUBRC NE 0.
 MESSAGE E002 WITH PARMS-LDS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 0030_OPEN_FILE *
 Open physical file for output *
FORM 0030_OPEN_FILE.
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE. "thg191105
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE
 encoding default. "thg191105
IF SY-SUBRC NE 0.
 MESSAGE E003 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
 FORM 1000_GET_SOURCE_DATA *
 Read source data into internal table *
--> INP_DATA " Name of internal table passed as parameter *
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
 EXPORTING
 UNIX = PARMS-UNIX
 PC = PARMS-PC
 FILETYPE = PARMS-DS_TYP
 FILENAME = PARMS-PATH
 HDR_LINES = PARMS-HDR_LINES
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 INVALID_SOURCE = 8
 OTHERS = 9.
ENDFORM.
*eject
 FORM 2000_WRITE_OUTPUT *
 Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
 TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
 MESSAGE E004 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
 text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.
DATA: FILENAME LIKE RLGRAP-FILENAME. "SRY28NOV05
DATA: W_FILENAME TYPE STRING. "SRY28NOV05
DATA: W_FTYP(10) TYPE C VALUE 'DAT'. "SRY28NOV05
MOVE PARMS-DS_NAME TO FILENAME. "SRY28NOV05
MOVE PARMS-DS_NAME TO W_FILENAME. "SRY28NOV05
*BEGIN OF BLOCK COMMENT BY SRY28NOV05
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE = ' '
 CODEPAGE = ' '
 FILENAME = FILENAME
 FILETYPE = 'DAT'
 MODE = ' '
 WK1_N_FORMAT = ' '
 WK1_N_SIZE = ' '
 WK1_T_FORMAT = ' '
 WK1_T_SIZE = ' '
 COL_SELECT = ' '
 COL_SELECTMASK = ' '
 importing
 filelength =
 TABLES
 DATA_TAB = INP_DATA
 FIELDNAMES =
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_WRITE_ERROR = 2
 INVALID_FILESIZE = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 OTHERS = 8.
*END OF BLOCK COMMENT BY SRY28NOV05
*BEGIN OF BLOCK ADDED BY SRY28NOV05
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = W_FILENAME
 FILETYPE = W_FTYP
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22.
IF SY-SUBRC NE 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*END OF BLOCK ADDED BY SRY28NOV05
ENDFORM. " 2100_WS_DOWNLOAD
*eject
 FORM 4000_PROGRESS_INDICATOR *
 Write progress text to status bar *
--> TEXT " Text passed as parameter *
FORM 4000_PROGRESS_INDICATOR USING TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING
 PERCENTAGE = 0
 TEXT = TEXT
 EXCEPTIONS
 OTHERS = 1.
ENDFORM.
*eject.
 FORM 9000_END_OF_JOB *
 Close files on UNIX *
FORM 9000_END_OF_JOB.
CLOSE DATASET PARMS-DS_NAME.
ENDFORM.
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
 EXPORTING
 UNIX = PARMS-UNIX
 PC = PARMS-PC
 FILETYPE = PARMS-DS_TYP
 FILENAME = PARMS-PATH
 HDR_LINES = PARMS-HDR_LINES
 TABLES
 DATA_TAB = INP_DATA
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 INVALID_SOURCE = 8
 OTHERS = 9.
ENDFORM.
*eject
 FORM 2000_WRITE_OUTPUT *
 Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
 TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
 MESSAGE E004 WITH PARMS-DS_NAME.
 MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
 text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.

Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV

LSMW or ABAP Program:- I need BAPI function module or Direct input program

hi experts,
I have to develop the program which uploads the transportation pricing data for freight cost management.
the transcation code is XK15 for the application A.
There is a program called RV14BTCI which will uploads for the application V or M not for A.
So i can use lsmw or direct input program in both lsmw and abap program so plz help me if there is any BAPI function module or Direct input program for Application A.
thank you,
waiting for u r reply.
Edited by: SANTOSH MARUPALLY on Jan 22, 2008 6:27 AM

Hi Santosh
Am not really sure if RV14BTCI can not be used for other applications apart from V and M.
You can try using BAPI: BAPI_PRICES_CONDITIONS. Over the forum you can find few example coding.
Regards
Eswar

Problem in getting data into database with standard direct input program

HI All,
I am having problem which is not updating the records in MM01 or MM02 with standard direct input program. i have data in internal table. from that table i am trying to upload into database by using background job MRP_MATERIAL_MASTER_DATA_LOAD.
when i execute my program it is showing message job is started. then i go into sm37 and seethe job status by executing. there also i am seeing job completed succesfully.
but if i go to mm03 and find the materials are updated or created there i couldn't find the material numbers which are from internal table.
So if ny one help me it wil be great.
Thanks in Advance
Venkat N

Hi Anil,
Thanks for your answer, but i am facing problem is i have material no and denominator and Actual UOM and nominator field values in the flat file.....
by using RMDATIND direct input program with MRP_MATERIAL_UPLOAD as job name for background job while uploading data into database.
here i am not getting data in to database, but when i execute the job in sm37 it is showing that message job processing successfully completed...this is my status..
if u can help me in this it will be gr8ful..
Thanks,
Venkat N

Direct Input Program to move customers

Hi,
Is anyone aware of any Direct Input Program to move customers?
Regards,
Ravi

Hi
You could use the LSMW object
0050 - Object
Method - 0000
Award Points for useful Answers

Does file info in CS6 have spell check?

Does file info in CS6 have spell check?
If so, do I need to enable it?

CS3 will definately open a cs2 file. Something is not right if it won't. I have been using illsutrator since CS2 and have not had an issue yet.

How many sessions does SAP allow you to have ??

Dear Memebers,
How many sessions does SAP allow you to have ??
a) 3
b) 6
c) 9
d) 12.
I guess the right answer is B and C but in choices I have to select only 1, which answer will you pick and Why ??
Thank You.
Madhu.

> I wanted to know for sure what is the answer.
Hi Madhu,
If you are going to ask questions such as these, then please indicate that you have searched and what you do already know and where & why you have a doubt somewhere which is worth discussing in the forum or sharing opinions or experiences on.
Just asking for the answer only so that you don't feel too alone when answering 6 in the interview is of little value.
Normally such "answer a, b, c, or d only or be quiet"-type-threads (like certification tests are) are deleted. That is the rules, and we have them for a reason.
Anyway, you guys seem to have sorted this out amongst yourselves so there is no reason to interfere here IMO. Thanks for that.
Cheers,
Julius

How to find which custom program uses authorization checks

Hi all,
I have been asked to find out which custom ABAP program in our organization is using Authorizations checks and which is not.
Since there are thousands of custom programs I will need to automatize this process somehow. But I am not an ABAP expert and I will need some help.
Could any of you give me an idea of what would be the best strategy to find out if authorization objects/checks exist in a number of ABAP programs? (would a simple text search do?).
Many thanks,
Aldo

If you are looking out for Authorization related to Execution of any program, then look for entries in table TRDIR where field SECU (Authorization Group) is not blank.
Below SAP documentation may help you:
Authorization Group
Authorization group to which the program is assigned.
The assignment of a program to an authorization group plays a role when the system checks whether the user is authorized to:
Execute a program
--> Authorization object S_PROGRAM
Edit a program (-Include) in the ABAP Workbench
--> Authorization object S_DEVELOP
Programs that are not assigned to an authorization group are not protected against display and execution.
Security-related programs should, therefore, always be assigned to an authorization group.
Report RSCSAUTH can also be used to assign programs to authorization groups. This report is documented in detail.

Does SAP Web AS ABAP support automatic checking of revocation lists (CRL)?

Hi,
At my customer we have the scenario that X.509 client certificates (smartcards) are to be used (for authentication) to access CRM Web Interaction Center from a web browser. As I understand it, this basic scenario is supported.
But I can find any information that the ABAP stack supports automatic checking against an external CRL. Rather it seems that the valid certificates must be maintained (manually) in the CRM server, which is unwanted by the customer.
Does anyone know of ways to get automatic checking in the ABAP stack? (using the Online Certificate Status Protocol OCSP, or other method)??
We also have Portal installation and JAVA stack in the system landscape, and I understand there are ways to perform CRL checks with SAP Java?
Ideas anyone?
Thanks,
Lars

No, in Web AS 6.20 there is an older version of the ABAP stack without the feature of Web Dynpro for ABAP. On the Java stack Web Dynpro for Java comes with release 6.40 which is supported of course.
regards, Manfred

Error while running the RMDATIND direct input Program

Hi experts,
I am writing a program to load a material for the BASIC VIEW and PURCHASING VIEW and SALES VIEW and PLANT STORAGE VIEW and WARE HOUSE MANAGEMENT VIEW.
While running the RMDATIND program with the file i am getting the error " Specify the relevant unit of measure ".
Can any one help.
Waiting for your replay.
Thanks,
Kruthik.

Check UOm, Alternate UoM and EAN Number fields
Regards
Vinod

Does Crystal Reports Server 2013 have Dashboard Drivers built-in.

Hi: Does Crystal Reports Server 2013 come with built-in drivers for Dashboard 4.1.
In fact, is CentralManagementConsole/Monitors/Dashboard an example of "dashboard" technologies.
...thanks, Stanley

Abhilash,
While that is definitely the case with the full BI Platform, I'm not entirely sure that it's correct for Crystal Reports Server. CRS is limited to Crystal Reports - the features for other parts of the BI Platform are not enabled, so I don't believe you can publish from Dashboards into CRS.
Stanley,
The Monitoring Dashboard is a standard feature of the platform. Just because it works, doesn't mean that content for Dashboards is enabled. You could try publishing from Dashboards to test, but it probably won't work.
-Dell

LSMW Direct Input Custom Program

Hi All,
I have been trying to set up a custom (Z Program) for direct input method for LSMW. So far I have dicovered that it can be achieved by modifing SXDA0-3 tables.
Has anyone achieved this successfully? Any example (even the simplest one) or step by step help would be highly appreciated.
Regards,
~Mark

Yes, it does appear that this table contains the data which gives the structures names of the structures used in direct input programs.
Documentation for LSMW is limited, but here are some links.
http://www.erpgenie.com/sap/saptech/lsmw.htm
http://www.sap-img.com/sap-data-migration.htm
http://www.ficoexpertonline.com/downloads/0703.doc
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm
REgards,
RIch Heilman
Message was edited by:
Rich Heilman

EAN/UPC check digit creation with Direct Input

Hi Experts,
I am working on Material data transfer using Direct Input. Requirement is to update the EAN/UPC for each Alt. UOM in Additional data view of Material master.
Further we need to set Indicator for automatic Determining the check digit for EAN .
I got Direct IP structure BMMH8 and BMMH6 for transfeering this data but didnt got Indicator field which I can set to automatic determining the check digit for EAN
Please let me know how to pass indicator for finding the check digit automatically while creating materials using Direct Input method.
Thanks in Advance...
-Harkamal

Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV

Authorization check on standaerd sap search help

Hi friends,
Can we have authorization check on standaerd sap search help?
For example, if I want a perticular user to see the data only for the company code he belongs to...
Can we do it
Regards,
Ankit

Hi
In generally the search help don't check any authorization objects.
If you need to do it you need to develop a your own function module exit where you can filter the data can be listed in the search help.
Max

Does SAP direct input programs have authorization checks built-in?

Similar Messages

Maybe you are looking for