Does SAP ECC 6.0  run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?

HI all,
Does SAP ECC 6.0  run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
Thanks in Advance
Sapsanthose

sapsanthose wrote:
HI all,
>
>
>
> Does SAP ECC 6.0  run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
>
>
> Thanks in Advance
>
> Sapsanthose
Hi,
Yes, it does. Check the service.sap.com/pam
Best regards,
Orkun Gedik

Similar Messages

  • SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server

    Hi,
    I need to find out whether it's possible to install SAP R/3 4.6C
    with Oracle 9.2 on a Windows 2003 - Server.
    Is is only possible to install this sap-system with Oracle 8.1.7 on a Windows 2000-Server? Or are there some other ways?
    If no, please tell me the possibilities for the correct installation of the desired sap-system.
    Awaiting for your feedback.
    Kind Regards

    ->SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server
    GreetZ, AH

  • Best practice for installation oracle 11g rac on windows 2008 server x64

    hello!
    can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
    best regards,
    christian

    Hi Christian,
    Check this on MOS
    *RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
    DOC Modified: 14-DEC-2010
    Regards,
    Levi Pereira

  • Install and uninstall of Oracle 11g R2 on Windows 2008 Server

    Hi,
    I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
    Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
    [5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
    Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
    Questions:
    What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
    What do I need to do to ensure a re-install is successful?
    Uninstalling Oracle -
    1.     Log in as the Administrator.
    2.     Stop all Oracle Services.
    3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
    4.     Delete the C:\app\oracle directory.
    5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
    HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

    Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
    Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
    Uninstalling Oracle -
    1. Log in as the Administrator.
    2. Stop all Oracle Services.
    3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
    4. Delete the C:\app\oracle directory.
    5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
    HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
    HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

  • Oracle 10g R2 on Windows 2008 Server

    Hi all,
    Can I install Oracle 10g Release 2 on Windows Server 2008 64-bit? If not, is there any workaround solution? Our brand new server was shipped with Windows Server 2008 CD and we cannot install Windows 2003 on that machine.
    Thanks in advance.

    Please note that AS 10g R2 is not certified on Windows 2008, as per:
    Oracle Application Server 10g Release 2 (10.1.2.0.2) Certification Information
    [http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html]
    All certifications are posted here:
    http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
    Version 10.1.3 is certified on Windows 2008 and 2008 R2, noting that this is not an upgrade from 10.1.2. It provides a different suite of products. You can decide on 10.1.2 verses 10.1.3 depending on your needs. For all product offerings, the Oracle Fusion Middleware 11g (11.1.1.) is certified on 2008 and 2008 R2.

  • Possible to run Discoverer 9i on Windows 2008 server

    Hello,
    We have Oracle Discovere 9i currently running on a windows 2000 server against a oracle 9 database. The server is due to be upgraded to windows 2008 server - is it possible to install and run discoverer 9i on the new windows 2008 server - is there a compatibility mode ?
    Many thanks,
    Lawrence

    I don't know if CE holds a full blown version of a JVM required to run forms....we don't have any certification plans currently for CE.
    Regards
    Grant Ronald
    Forms Product Management

  • Dataguard installation oracle 11gr2 on windows 2008 server

    Hi,
    I have oracle 11gr2 database on windows 2008 server. I have been given a primary and secondary server with the same setup.
    Now i want to install dataguard. AFter installing i need to test it for disaster recovery.
    Can anyone please suggest me a document for this? I searched in this forum but i couldnt get any.
    Please help.

    An obvious place to look at is our Online Documentation about Data Guard Installation:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e17022/toc.htm
    See
    3 Creating a Physical Standby Database
    there.
    There is not much special-Windows for Data Guard - of course you need to create Windows Services for both Databases etc. as described here:
    http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • No receiver could be determined while doing SAP ECC Integraion with MDM 7

    Dear All,
    Can you please help me to resolve the following issue.
    We are doing SAP ECC Integration with MDM 7.1 by using MDM PI Adapter.
    Source side we are processing MATMAS.MATMAS05 IDoc and Receiver side we are using MDM PI Adapter to Connect the MDM System.
    I have checked the Configuration by using Test Configuration Wizard, it showing every thing fine there.
    Is it because of any network connection issue at the Target system (MDM) side?
    Plz check the error message for your reference;
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Receiver Determination
    -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIServer</SAP:Category>
    <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:Stack>No receiver could be determined</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Thanks
    Mahesh

    Hi,
    From error looks like it is not failing at receiver determination step. if you all configurations are fine, then this could be because of system cache refresh.
    Go to Edit mode in your scenario and again save it and activate it. Do a cache refresh and check if it works.
    Regards,
    Shiv

  • Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

    Dear all,
    while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
    we are getting error as not support.
    please confirm wether this version of OS is uspported or not.
    thanking you in all,
    by
    Animesh

    actualy we tried to change Oraparam.ini file in the installation folder...
    edited ...  windows= 5.0, 5.1, 6.0
    we had entered 6.0
    Yes - that is necessary.
    and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
    Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
    if you suggest us to use 2003 64 bit for temporaray .... purpose.
    and is there any specified procedure to UPgrade OS.
    like... DB should be updated before OS upgradation.
    You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
    The question you have to ask is:
    Why do you need Windows 2008? Is there any technical implication?
    Markus

  • Oracle obdc driver 32-bit doesn't run on 64-bit windows 2008 server r2

    Does anyone know a way to run OBDC driver on windows 2008 server r2?, a way to run the app?

    Pl post in the Heterogeneous Connectivity forum (Heterogeneous Connectivity as this forum is meant for issues related to database installs
    HTH
    Srini

  • Does Windows 2008 Server run ok under Mac Mini Bootcamp?

    Does anyone have any experience of installing and running Windows 2008 Server on a Mac Mini (of which has either Mac OS or Mac OS Server installed), under Bootcamp?
    I currently have an old Dell with Windows 2008 server which acts as my Domain Controller, Exchange Server for a small home-office network. It's due an upgrade as the hardware is so old (and noisy!) and like the idea of having a nice compact, quiet Mac Mini, but want to make sure it can carry out the same duties under bootcamp on Win2008?

    Windows 2008 can be installed in Boot Camp.  However I don't believe it is officially supported by Apple so there may or may not be issues with installing the Boot Camp Drivers (or future updates to the Boot Camp drivers.)  Not something I'd be recommending for a "production" environment.  If this is a test/dev system, then probably worth trying, depending on how critical your network uptime is.
    Also, you didn't mention if your Dell came with Windows 2008 preinstalled, but if it did, then likely it has a "branded" version of Windows that won't activate correctly on non-Dell hardware.  (If your Windows disks have "Dell" on them, they won't work with the Mac.)  So you may need to purchase a retail or volume license copy of Windows 2008.
    In general, for a server running as a DC & Exchange, you'd want RAID1 as a minimum so that would be the Mac Mini Server, not the "desktop" Mac Mini.  Unless you have one lying around, you're looking at something around $1500-$2000 to start, depending on whether you can transfer your existing Windows 2008 & Exchange installations.  (Another $500-$2000 depending on what vesions of Windows & Exchange.)  And probably 8GB of RAM since Windows 2008 & Exchange on 4GB is pushing it.  Considering the costs, I suggest you look at the Dell T110 series or the HP Proliant 110 series.  Both lines are very quiet and are supported for Windows 2008 from the factory, including Windows Small Business Server, which includes Exchange.  While not as small as a Mac Mini, they are mini towers and about the size of a typical PC desktop.
    If you really wanted a small footprint, then HP has a "microserver" series.  You'd probably need to call HP to get the build you want as the online ordering is limited for that model.  From Dell, there is the Zino model desktop.  Again, not supported for a "server", but you were going to consider a the non-server version of the Mac Mini, then the Zino has at least a chance of you reusing your existing versions of Windows if they're Dell branded, thus saving your something in the range of $500-$2000 for new software.  (But I would NOT recommend a non-server chassis without RAID1 hard drives, so the Zino is not my choice.  I just offer it as a possibility if you accept the risk of an unsupported installation, as would have been installing Windows 2008 in Boot Camp.)
    So yes, it will work.  But I wouldn't recommend it for a production environment, especailly if you have the "desktop" computer without RAID1.

  • Windows 2008 Server R2 & SAP Business One

    Does anyone have any experience, good or bad, with SAP Business One and Terminal Service on Windows 2008 Server R2?  We are finding a number of issues with this configuration and we are looking for any feedback that is out there.
    Here is the situation - our customer is running SAP Business One v2007 SP01 PL09 Hotfix4 on a Windows 2008 Server R2 machine.  All users (15 max) access SBO via Terminal Service to this machine, which also holds the databases (SQL Server 2005).  The machine currently has 20GB of RAM.
    What we are finding is:
    1) When any process related to SBO (SBO core or add-ons) consumes some portion of memory, none of that memory is ever released back to the O/S until SBO is completely closed.  So over the course of a day each user ends up simply consuming more and more memory as forms are opened for transactions.  While we do see this in Windows 2003 Server to some extent, at least some memory is released when a given form is closed.
    2) Once the system hits a point where around 75% of RAM is consumed the users start seeing application "hangs" and are forced to manually terminate SBO (via Task Manager) and restart.  There doesn't seem to be any paging or use of virtual memory (if my terms are right) in use.
    3) If the system is busy and a new window/form is opened the new window immediately (within one or two seconds) presents the "Not Responding" message on the new window.  Depending on the circumstances the application is simply waiting for resources and will continue opening normally.
    I would appreciate feedback from anyone who has experience with Windows 2008 Server R2; and especially using it for Terminal Services.  My personal feeling is that it is a platform that should be avoided but we would certainly like to hear what other folks have to say.
    Regards,
    Ross Unger
    Third Wave Business Systems

    I believe the supporting of this OS is still on Planned basis.  You may check with SAP support to give them a good user case to fight with any non-compatible issues.
    Thanks,
    Gordon

  • Oracle 10g installation on Windows 2008 VMware

    Hi everybody,
    hope you can help me with that issue; I try to install a ECC 6.0 test-system with Oracle 10g on a Windows 2008 VMware instance.
    I am getting a strange error when executing sapserver.cmd when I try to install the Oracle software; the Oracle Universal Installer 10.2 is aborting at the very beginning with an error popup with following content. First I enter the Drive letter for installation and SID and then OUI trys to start...
    The program was not closed properly. An internal error occured. Please provide Oracle support with following datas:
    "unknown"
    "unknown"
    "unknown"
    Any ideas? I did not find anything in Metalink or on the SAP Marketplace. And I am aware that Oracle is not official supported on VMWare; on Windows 2003 I did not occur any similar problems.
    kind regards
    Philipp

    The OUI doesn´t work (yet) on Windows 2008, you will need to wait for the OUI 10.2.0.4.
    Markus

  • Bank Statement management in SAP B1 on a VMWare Windows 2008 server

    Hi everybody,
    One of our customer is using a VMWare Windows 2008 server with SAP B1.
    Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
    Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
    Everything including bank statements transfer was working very fine on a "real" server before new implementation.
    When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
    "JAVA Virtual Machine Launcher : could not find the main class : program will exit."
    JAVA is well installed on the VMWare server.
    We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
    Does anybody already have this problem with Integration Platfom on VMWare server ?
    Is there a solution to our problem ?
    Thanks for all your contributions.
    Best regards.
    Michel

    Hi Michel,
    First of all, your PL is too low.  AFAIK, the first supported PL for 2007A SP00 is PL30.  You may upgrade your PL first to see if that is a bug or not.
    Thanks,
    Gordon

  • Oracle ebs installation on windows 2008 R2

    Hi Hussein,
    I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
    The Prerequisites Software are:
    1.Chose and Operating System windows 2008 (32 bit):
    Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
    2.Install the Microsoft Visual C++ 2008 software.
    See the post for installation of – Microsoft Visual C++ 2008
    3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
    See the post for installation of – MKS Toolkit.
    I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
    Regards,
    Raj

    hi Raj
    3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
    See the post for installation of – MKS Toolkit.
    I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
    Yes go for cygwin
    please see
    Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
    Oracle E-Business Suite R12 Installation Steps on Windows XP
    ;) AppsMAstI :)
    Sharing is Caring

Maybe you are looking for