Does SAP generate COMMIT WORKS when BAdIs end?

I want to call a function module "IN UPDATE TASK" from within a BAdI.
Will SAP generate a "COMMIT WORK" when the BAdI ends, so that the function module is triggered ?
If I do have to code a COMMIT WORK in the BAdI to trigger execution of the FM, won't this interfere with any commit schedules that SAP has in mind ????

Hi Narendran -
I agree with you - that's why I asked the question about whether I had to code my own "commit" in the BAdI - I have never had to do this before.
But the good news is - even though I'm calling the FM "IN UPDATE TASK" from an SCM-APO CIF BAdI, SAP generates a commit work because my FM fires even when I don't have an explicit commit work in the BAdI.
So all is well that ends well.
Thanks again.
djh

Similar Messages

Why does my MacBook stop working when I tr to plug in my iPad to do some file syncing?

Why does my MacBook stop working when I try to plug in my iPad to do some file syncing? This is the second time I have had it happen to my MacBook. The computer just shuts down and cannot be restarted. When I plug it into the charger I get a faint Green light where it plugs into the MacBook. When I took the computer into my local Mac store last time this happened (Nov 2012) they reckoned they couldn't find anything wrong with it. Has any body else encountered a similar issue?

That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

HT4993 why does my internet not work when not connected to wifi?

why does my internet not work when not connected to wifi

Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

Why does the mail not work when i updated my 5s to iOs 8?

why does the mail not work when i updated my 5s to iOs 8?

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

Why does my iTunes stop working when i try to sync music to my iPhone?

Why does my iTunes stop working when I try to sync music to my iPhone?

Morning Bandg72,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

HT204266 Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i do?

Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i have to do?

You can try cleaning the headphone jack. However, I suspect that th headphone jack needs replacement.
Apple will only exchange your iPod for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

COMMIT work in BADI

Hi all,
Can anyone tell me about, is COMMIT WORK is allowed in BADI or USER EXIT?
If not, what is the aalternative for that?
Thanks in advance.
Best Regards,
Prasad

Hi Prasad.
I would like to suggest a couple of references,
[SDN - Reference - Call Transaction / Bapi and Commit work in a Update task|Call Transaction / Bapi plus Commit work in a Update task?;
[SDN - Reference - COMMIT WORK on BADI BUPA_GENERAL_UPDATE|COMMIT WORK on BADI BUPA_GENERAL_UPDATE;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

COMMIT WORK on BADI BUPA_GENERAL_UPDATE

Hi all,
We're trying to propagate partner functions from the BP to associated business transactions.
We're using the instruction commit work in the BUPA_GENERAL_UPDATE. The problem comes when we propagate the partner functions more than once in the BP, because the first time works but the second causes a short dump (only in PC-UI, in SAP GUI it works properly).
We need to commit to unlock the modified opportunities.
Anyone knows the adecuate method to commit the work in PC-UI for transaction BP?
Thanks in advance, any help will be appreciated.
David

Hi David,
My first try would be to issue the COMMIT statement inside a Form (<i>commitroutine</i>)and call this form in as
PERFORM <i>commitroutine</i> ON COMMIT.
Let me know if it works.
Hope it helps.
Thanks, Debasish

Why does diadem intellisense not work when using scriptinclude or for global object

I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.

Here is more information on the issue.
I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.
'Test.vbs
class test
    public function test1()
         msgbox("test1")
    end function
    public function test2()
         msgbox("test2")
    end function
end class
'now create a object of the class
dim oTest
set oTest=new Test
'now when you type oTest. you get the following functions to choose from
oTest.test1
        .test2
Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
'Main.vbs
Option Explicit 'Forces the explicit declaration of all the variables in a script.
call scriptinclude("c:\1atmp\Test.vbs")
dim oTest
set oTest=new test
'now when you type oTest. it shows none of the functions in the object oTest
oTest.

Why does internet explorer stop working when I open up a tutorial in Photoshop Elements 12?

Why does my internet explorer stop working when I upen up a tutorial for Photoshop Elements 12?

Welcome to the forum.
Unfortunately, this is the Premiere Elements Forum, which is a video-editing program, and is not Photoshop Elements, an Image-editing program.
I will Move your post to the very active Photohsop Elements Forum.
Good luck, and your link, plus any e-mail subscriptions should follow.
Hunt
[Moved to Photoshop Elements Forum]

Why does my cursor not work when hovering in certain sites?

My cursor does not bring up information when i hover in sites like appointment plus. I use safari, when i downloaded firefox and signed on the cursor worked, is there something i am missing? I prefer safari, but will switch to firefox if i have to.
At my office i have an old mac with snow leopard and the cursor works on that while on safari. my home computer has lion and it doesn't work

Your Mac sends traffic to the interface at the top of the list in
System Preferences > Network
When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
The solution is to cable that Printer to your Router, not to your Mac.
Alternatively, you could add a small Switch and connect your Mac and the printer to it.
If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

Why does my .vi not work when used as a sub vi

I have a vi that produces a picture on the front panel. Displayed in the picture are solid grey levels for testing. Two grey levels are chosen inside the vi and then the picture flickers betwen the two. When I run the vi by itself it runs wonderfully, but when I run it as a sub vi it does not work. Even when I just place the sub vi in the block diagram and connect all of the controls and indicators up it doesn't work.When I use the highlighter it shows that the control values go into the sub vi and the sub vi lights up, but there is nothing output from the sub vi to the wired indicators. When I open up the Block diagram of the original vi from which the sub vi came, and highlight it while running the subvi, it
shows that it is working with information running to all of the indicators. If I start a new program with only the sub vi in the block diagram and all of the controls and indicators connected, should it not behave as the sub vi? I will attach the vi that I am using as a sub vi, and I welcome anyone to place it in the block diagram of a new vi, connect all of the controls and indicators up and see if it works. I know that there is something completely obviopus that I am missing, but I can't see it. Any help would be greatly appreciated.
Attachments:
GL_Flicker.vi ‏74 KB

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Does SAP generate COMMIT WORKS when BAdIs end?

Similar Messages

Maybe you are looking for