Does SAP is up to date as per market?

Hello
Does SAP supports Mobile forms, which are meant for tablets / iPads, as below? Bcz now tablets become as a part of the life
LiveCycle Help | Mobile Forms Overview
If so, is it available in SAP Market Place to download?
Thank you

hi
Answered here: Re: What is the current updated version I can get it from Market place?

Similar Messages

DOES SAP charge per byte for B2B sceanrios ?

Hi All,
Does SAP charge per byte for B2B scenarios. If yes can any one provide some leads to get more information on this.
Thanks
Raju

It varies from customer to customer, from product to product.
The default procedure is to charge all B2B traffic, but in some cases the customer contract can exclude some scenarios from extra-charging.
For example, there are some standalone/engine products which require XI/PI to communicate with external Business Partners, in particular the government. In some cases, since that communication is a legal requirement, its charge is embedded in the engine license, and no extra charge is done for the external XI traffic.
As sugested, best way to be sure is to have your contract analyzed together with SAP sales contact.
Regards,
Henrique.

Does SAP have report display the history of dunning

Dear Expert,
Would like to seek for your help,Does SAP have report display the history of dunning for AR module and what are the T-code and report?
Please help.
Regards,
KH

Hi
Dunning status is updated in customer master,you can get the required data from Table LFB5
hope this will help to some extent
Thanks
Kameshwar Rao

System does not propose the delivery date based on factory calendar

Hi,
I am creating a sales order for a delivery date for this sat which is (2/22/09)
I have maintained 2 separate calendars for
1) shipping point
2) for the route
The route has a transit time of 1 day and the calendar has sat and sunday as non working.
the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
The material is available in the warehouse
Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
In the schedule line i do see the date as 2/22/09 only.
The delivery was created with the following dates
Picking = 2/17/09
Transportation Planning = 02/18/2009
Loading =02/18/2009
Planned GI= 02/18/2009
Delivery Date = 02/22/2009
How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
Can any one explain the behaviour of SAP for the delivery date logic

Dspsac,
Delivery date can be any date. For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route. You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
Calculations are explained in SAP online help
[Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
Regards,
DB49

UME using SAP R/3 as Data Source

Hi,
We are trying to set User authentication to SAP R/3 system, not load balanced system, on the User Management Configuration values: Client=501, Userid=sapjsf, Password=pwd, sys id=RS1, Group and Message server= blank, Application server= server.company.com, Sys. number=00, Max pool=10, Max wait=300000.
When testing connection, I get this message:
(System ID): com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'mshost' missing
(System ID & System Number): OK
Is this an error? since our SAP R/3 is not a load balanced system.
Did we miss any item for the setup, in dataSourceConfiguration_r3.xml? The SAPJSF "communication user" got the right sap role and authorizations.
Portal version : EP6 SR1
Regards
Huzaifah

Hi,
If u want to Use The SAP R3 System as Data source u may
do it from config tool if u got following message.
WARNING! You are not allowed to select dataSourceConfiguration_r3.xml as active configuration file.
(For Portal Patch less than SP13 u must download two data source file which is attached with note - 718383
and upload it to portal which is described in the note)
the following are the procedure which i apply ,
Go to System Administration -> System Configuration ->UM Configuration
Now Do not change Data source from Here.
Make sure your data source is "Database Only"
(dataSourceConfiguration_database_only.xml)
Now enter the following value under SAP System Tab.
Client : - Your sap system client
User:- Sap user
password: - password
System language:- your system language
Application server: - Host name or IP of sap system
System Number : - SAP instance number
Maximum Size of Connection Pool : - As per req.
Maximum Wait Time in Milliseconds :- 10000
Now, save the changes and shutdown the portal server.
Using Config Tool change the data source. Run the following
<drive:\> usr\sap\<sid>\JC<instance number>\J2EE\configtool\configtool.bat
(Make sure the portal system is shutdown)
Under Cluster Data -> Global Server Configuration -> services -> com.sap.security.core.ume.services
Now find the key: - ume.persistence.data_source_configuration
The default was : - dataSourceConfiguration_database_only.xml
change the value to :- dataSourceConfiguration_r3.xml
click on set and from flie-> apply
Now restart the portal server ur data source changer to SAP R3 System
Regards,
Kaushal

SAP R3 Connection in Data Services - Configuration is

Dear all,
We are having an error when going through the steps in the configuration of BusinessObjects Data Services 3.2 with R3. The error is in the SAP R3 server.
Herewith the steps in regular font (based on the SAP BusinessObjects guide) and our output results in bold. If you can take a look on it, it will be great for us.
To install provided functions using the CTS system:
1.     Copy the provided transport files to the appropriate directories on the SAP server.
Installing Functions on the SAP Server Installing the functions using CTS
Note:
In these steps, 900XXX.SXX is a variable. To substitute the correct file name for the current release, see the readme.txt file in the ...\DataServices\admin\R3_Functions\transport directory.
-     Copy R900XXX.SXX to the /usr/sap/trans/data directory.
-     Copy K900XXX.SXX to the /usr/sap/trans/cofiles directory.
As we have R3 connection we have moved the R63 file. Complete name of the files are:
-     R900086.R63
-     K900086.R63
2.     Log on to the SAP server and run the transaction /nSE37 to determine if function group ZAW0 already exists. The CTS system will install the Data Services functions into a single function group ZAW0 that it automatically creates on the SAP server if it does not already exist.
-     If function group ZAW0 exists and contains previously installed Data Services functions, add an unconditional mode 2 option (parameter U2) to the tp import command described in step 4 below (tpimport S<xx>K900<xxx> <SID> U2).
-     If function group ZAW0 exists and is used for another purpose, modify the transport file to use a different function group (such as ZAW1) to install the Data Services functions. Make sure the function group you use does not already exist in your system.
-     If you are installing the transport files on a Unicode-enabled SAP server, manually create the function group ZAW0 with the Unicode attribute set.
In our case we have found there is already a ZAW0 created -> nothing to do in this step
3.     From a command window, run the following transport command:
-     tp addtobuffer S<xx>K900<xxx> <SID>
(where SID is the SAP system ID)
You receive the response:
This is tp version <SAP TP and SAP versions> for <database type> database.
Addtobuffer successful for S<xx>K900<xxx> tp finished with a return code: 0 meaning:
Everything OK
This is the command we have run and the error retrieve
The SID is NDV.
C:\tp addtobuffer R63k900086 NDV
This is tp version 372.04.57 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown, ....)
We have modified the statement with different names for the R63 file, but we didnu2019t success. We are retrieving same error.
We also have applied the command in the following link:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/etpsettings-could-not-be-opened-875506
and retrieve another error. The following step would be doing the u201CSAPEVTPATHu201D downloading, but, we are not sure if this would fix the issue or if the issue is related to something else.
4.     Run the next transport command:
tp import S<xx>K900<xxx> <SID>
(where SID is the SAP System ID)
We couldnu2019t reach this point, as we are having an error in the command below.
Thanks for your help on this!
Beatriz Minguez

There is a problem in the transport file supplied with BODS installation folder. Pls refer to the SAP Note :
1616269 - Problems when installing Data Services 4.0 SAP transport files (900155.R63)
We have used the new transport files but we are still getting the below warnings in the log files and it returned with return code 4 :
Maximum length ("255") for "CHAR" in transparent tables exceeded
The SAP Note 1446648 - Warning Messages installing SAP R3 transports for Data Services sayou can ignore those warnings but we are still not able to see the ZAW0 Function group in SE37.
Let me know if you are able to do it successfully.

In FB60, duplicate invoice check does not work if invoice date is different

In FB60, duplicate invoice check does not work if invoice date is different
This issue is in FB60 and not MIRO.
Duplicate invoice check is activated in vendor master.
I posted an invoice for a vendor with amount $ 100, Reference 1234 Invoice date Nov 01, 2011
I tried posting for same vendor (and also Co Code) with amount $ 100, Reference 1234 Invoice date Nov 01, 2011. System does not allow. This is fine.
Now I change only date, from Nov 01 to Nov 02, and system allow posting.
Why I don't get the error message when date is different ? It should not be treated as a different invoice since invoice reference, amount, Vendor and Co Codes are same.
SAP documentation says that it checks document date during duplicate invoice check even for FI invoices, then why does it allows in this case.
Is this a bug ?
I already tried changing settings in SPRO under LIV, this does not impact FB60 invoice booking.
Thanks
Sandeep

Hi,
Use BTE - 1110 - (Check on Invoice Duplication) for FB60. Take the help of your ABAPer to make a coding in Function module mentioned in BTE.
Need to make a copy of the FM and then you can do relevant coding.
refer the link.
[http://www.thesapconsultant.com/2006/10/sap-business-transaction-events.html]
Regards,
Shridhar

Does SAP system provide 3 way matching report from PO up to payment in AP

Dear expert,
Would like to seek for your help to advise, does SAP system provide 3 way matching report from PO up to payment in AP with the following information?
Vendor Number
Vendor Name
AP Document Number
AP Document Date
Payment Document Number
Payment Document Date
Payment Amount
PO reference Number and Date
Item Description
Please help.
Regards,
KH

Hi Atif,
Thank you for the prompt reply, however I have a few question to seek for your advise as below:
a)I would like to know does SAP system have any standard report which have the information of 3 way matching report from PO up to payment in AP module?
b) I have find one report using T-code:FBl1N (vendor line item) is able to display the report with information of invoice,payment and there is one field purchasing document in the report however this field do not have any po number refer to the invoice.
I would like to know what the field purchasing document mean for (i.e what are the information capture on the column purchasing document)?
Please help.
Regards,
KH

Does SAP create missing files TRACExx when starting up?

Hi there,
I'm working on a documentation regarding a system copy from a productive system to a consolidation system.
We're using Sun Solaris 10/64Bit with Oracle 10g2 and Netweaver 7.00.
In the directory /usr/sap/<SID>/DVEBMGS_xx/log there are several files SAP uses:
- ALALERTS
- ALMTTREE
- ALPERFHI
- ENQBCK
- SLOGxx
- TRACE
- TRACE00...TRACE07
My question concerns the TRACE-files. Only the file TRACE seems to be used by the consolidation system, but there are still eight files TRACE00 up to TRACE07 that were last accessed in 2008 and before.
These files are filled with data from former consolidation systems that got overwritten everytime by the system copy. Now, after the new copy, the SAP system is still down. May I delete these files? Does SAP create these files new when starting up?
Greetz, Uwe.

Hi,
Yes you can delete those files at any time. Check SAP Note 16513, it may help you.
Thanks,
Sushil

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

SAP Best Practices for Data Migration :repositories only on MS SQL Server ?

Hi,
I'm implementing the "SAP Best Practices for Data Migration" (see https://websmp109.sap-ag.de/bp-datamigration).
As part of the installation you have to install MS SQL Server Express Edition. The installation guide contains detailed steps to do this. All repositories for Data Services should be running on SQL Server, according to the installation guide.
The customer I'm working for now does not want to use SQL Server, but DB2, as company standard.
So I use DB2 for the local and profiler repositories.
I notice however that the web application http://localhost:8080/MigrationServices does not support DB2.The only database type you can select in the configuration area is MS SQL Server.
Is this a limitation, a by design ?

Hans,
The current release of SAP Best Practices for Data Migration, v1.32, supports only MS SQL Server. The intent when developing the DM content was to quickly set up a temporary, standardized data migration environment, using tools that are available to everyone. SQL Server Express was chosen to host the repositories, because it is easy to set up and can be downloaded for free. Sone users have successfully deployed the content on Oracle XE, but as you have found, the MigrationServices web application works only with SQL Server.
The next release, including the web app, will support SQL Server and Oracle, but not DB2.
Paul

Does SAP BO has Idoc structures

Like SAP R/3, does SAP BO also has Idoc structures to send and receive data from the external system, mainly the production related data.
Can some one help me on this.
Thanks and Regards
Pari

Hi Pari,
Just to clarify further what Gianluigi said:
SAP B1 is technologically different - no IDocs etc...
Regards,
Frank

Does SAP support incremental/delta backups? if so which note describes it

I'm just about to test incremental/delta backups on udb 9.5 fp1. Now to my question:
Does SAP support incrmental/delta backups?
Is there a note, I couldnt get a hit on OSS
Are there any gotcha's? such as do I need to move read only tables to a new talbespace?
Any info on this is greatly appreciated.
Anke

Hi Anke,
You can specify whether you want to perform a full, incremental or incremental delta backup and the frequency via DB13 or the planning calender in DBACOCKPIT.
SAP Note 1269697 DB6: Backup Performance
should be of use to you and please also see our administration guide available at our main page
https://www.sdn.sap.com/irj/sdn/db6 under Administration. Specifically check the guide
"Data Recovery and High Availability Guide and Reference" mentioned in Chapter 8.3.5 Advanced Backup Techniques
There is not a specific SAP note relating to incremental/delta backups but they can be scheduled via DB13 and so, they are supported.
Regards,
Paul

Does SAP ECC6 support advance tax return (rfumsv00)/GST reporting for USA a

Does SAP ECC6 support advance tax return (rfumsv00)/GST reporting for USA and Canada?

Hello
I think it does.
However please check this
In some countries, you cannot use the general program for tax returns to create the annual tax return because of specific national reporting requirements. For these countries, SAP delivers additional country-specific programs to meet these reporting requirements.
For the individual country-specific reports, see the General Ledger menu under Reporting ® Tax Reports.
The program RFUSVX10 performs the data medium exchange, allowing you to transfer the DME file to a hard drive or diskette. You can find more information on this topic in the program documentation.
Regards

Does SAP Netweaver Mobile support integration with devices like Intermec?

Hi All,
We have a scenario where the customer is currently using SAP Console based approach for RF transaction related requirement. The device used is Intermec CK31 for barcode scanning and updating the data in the SAP backend. Some example scenarios are Goods Issue & Scrap. Since the SAP Console based approach does not support Offline mode, the customer is interested in evaluating the option of using SAP Netweaver Mobile for the solution.
Related to this requirement, we have the following queries.
1) Does SAP Netweaver Mobile support Intermec CK31 device without a product like Mobile Factory. What are the pros and cons in this approach of using SAP Netweaver Mobile only? If yes, are there any documentation how this can be accomplished?
2) Are there simulators for Intermec scanning devices like Intermec CK31 to be used while application development?
3) Can Mobile Factory be used for implementing this requirement? Can it support offline scenarios without SAP Netweaver Mobile? Does Mobile Factory provide Simulators for the devices such as Intermec CK31 for application development?
An early response would be greatly appreciated as we are in the process of evaluating a right approach for the customeru2019s requirement and the same needs to be provided soon.
Thanks in advance.
Suresh

Hi,
Refer to note 1057759 for the delivered Drivers for Peripherals and devices supported in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
Regards,
Suma

Does SAP is up to date as per market?

Similar Messages

Maybe you are looking for