Does sap provide fully loaded HANA sandbox for POC

Hi,
One of our potential customer looking out for a POC but they wonder wether SAP provides a fully loaded sap hana sandbox where could carry out a PoC.
Any input will help.
thanks,
Tilak

Tilak:
What is the objective of your POC?
If you are trying to stress test HANA with high volume of data - then you need to speak to your SAP rep to get a performance tuned sandbox. However, if you are not too much concerned about stress testing but would like to show-case the HANA solution to your IT department showcasing steps involved in modelling a HANA solution, etc.. then you can use the AWS Amazon  environment.  I have done few POCs in my own AWS environment with the latest and greatest backend and front-end patches.
Hope this helps. Do let me know if you have any specific questions.
Regards,
Rama

Similar Messages

  • Does SAP Provide any standard conversion program for Batch Managment activa

    Hi,
    An idea if SAP Provides any standard program to conversion of non batch managed material to batch managed material in a productive SAP Environment and close open documents,
    It would be great help if somebody can reply to these queries.
    Thanks in advance
    Regards
    Bijaya Pradhan

    Hi
    Use the same Driver program RIPROV00 which is used as Script driver program to fire the output from smartforms also
    Only thing is little bit you have to modify the program such that it triggers the smartform instead of Script.
    I think there is no smartform driver program for this IW21.
    see some standard SF driver program like RLE_DELNOTE and
    modify it and use it.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Does SAP provide framework for statistical calculations ?

    Hi all,
    Does SAP provide any framework for statistical calculations ?...The reason for asking this question is, in order to calculate the BSUoS (Balancing Services Use of System ) charges.
    There is a need to calculate the amount to levy charges for use of the Electricity transmission system. For that there are some statistical calculations need to be done.
    Please let me know, if SAP provides solutions for such requirements.
    Any information on this requirement is helpful.
    Sample Calculations:
    IBCd = u03A3j d CSOBMjd + BSCCVjd + NI jd +TLjd + BSCCAd u2212OMd u2212 RTd
    FYIncPayINTd = (PT int u2212 FSOINTd ) * SF int
    and so on.
    Regards,
    Sairamakrishna Kante
    Edited by: sairamakrishna kante on Aug 6, 2008 8:26 AM

    Hi,
    I understood your requirement as, you would like to have a  pre-configured set for every business process like sales, returns etc... These pre-configured solution r available in SAP in terms of BC set, more information you can get in the SAP Best practise (http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm)  wer for every business process you can install the building block which SAP has created.
    Regards
    Mani

  • Does SAP provides standard webservices?

    HI Experts,
    Does SAP provide any standard webservices in PI for  different areas of modules like FI,HCM etc.. for  payroll,ESS etc...
    IF So, How to access and make use of them.
    Thanks in advance
    Reyaz

    Hi Reyaz
    SAP provides Enterprise Services for various modules and industries.
    you can access these and get more information from'
    http://www.sdn.sap.com/irj/sdn/esworkplace
    You can also browse these entreprise Services in the systems like HU1, etc hosted in ESworkplace
    It is possible to consume these Enterprise Services using PI. these could be inbound as well as outbound. the proxy implememation is also provided for these Enterprise Services in the backend.
    Regards
    Monika

  • Does SAP business one require solution manager for license keys ?

    Does SAP business one require solution manager for license keys or you can directly get the license key from service.sap.com?

    Hi,
    Welcome you post on the SAP business one forum.
    In general, only SAP partner can get the license key. However, partner can assign the right to customer so that they can get it from portal directly.
    Thanks,
    Gordon

  • Does SAP provide COM objects for windows

    I am working with R/3 4.7 on WAS 6.20.  I am running win 2003 and SQL server. An admin asked me if SAP provided COM objects for controlling systems?
    Anyone know about this?
    Thanks

    Hi,
    I understood your requirement as, you would like to have a  pre-configured set for every business process like sales, returns etc... These pre-configured solution r available in SAP in terms of BC set, more information you can get in the SAP Best practise (http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm)  wer for every business process you can install the building block which SAP has created.
    Regards
    Mani

  • Does SAP support JVM 1.5.0 for the SAPgui 6.40 Rev 6 for the Mac?

    On Tuesday evening, Apple released a software update for Java 2 Platform Standard Edition (J2SE) 5.0 Release 4 for Mac OS X v10.4.5 or later. When you install the update, it will change the default version of Java virtual machine from Java 1.4.2 to Java 1.5.0. Apple also posted instructions for changing the default back to Java 1.4.2 at <http://docs.info.apple.com/article.html?artnum=303526>.
    When I launch SAPgui 6.40 Rev 4 or SAPgui 6.40 Rev 6 for the Mac, they both now use JVM 1.5.0. Does SAP support that, or should I follow Apple's instructions for changing the default JVM back to 1.4.2?
    Here is the information from the "About SAPgui" boxes.
    SAPGUI for Java 6.40 rev 4
    (Version ID 064000040400)
    Build: Thu Sep 1 02:10:41 MEST 2005 on uw1059
    Java VM: Apple Computer, Inc. Version 1.5.0_06-64
    OS: Mac OS X(ppc) Version 10.4.6
    APGUI for Java 6.40 rev 6
    (Version ID 064000040600)
    Build: Wed Dec 21 13:01:37 MET 2005 on uw1059
    Java VM: Apple Computer, Inc. Version 1.5.0_06-64
    OS: Mac OS X(ppc) Version 10.4.6

    Hello,
    as indicated in the system requirements of SAP GUI for Java 6.40, JRE 1.4.2 is the only supported Java version on any of the platforms including Mac OS X.
    Current Mac versions of SAP GUI for Java 6.40 unfortunately do not block usage of JRE 5.0 after installing Java 2 Platform Standard Edition (J2SE) 5.0 Release 4, which causes latter to become the Java default.
    We have discovered this recently and starting with the next revision of SAP GUI for Java 6.40 we will make sure that it uses JRE 1.4.2 independent from the Java default.
    Until then, it is required to change the Java default back to 1.4.2 like described in http://docs.info.apple.com/article.html?artnum=303526 in order to avoid unpredictable issues.
    It is planend to support JRE 5.0 with the upcoming SAP GUI for Java 7.00 on all platforms including Mac OS X.
    Best regards
    Rolf-Martin Woersinger
    SAP GUI for Java development

  • Does Weblogic Provides any in built utility for server side browser detection

              Hi
              Does Weblogic Provides any in built utility or package for server side browser
              detection i.e. to know the browser details
              of the client with the first request.
              One such available product is BrowserHawk(http://www.cyscape.com).
              any thing similar to this available?
              Thanks in advance
              Mrutyunjay
              

    Hey Mohammed,
              yes, you could use just wl server to do file uploading. in your html client
              code, you need to specify the type of the data that you are sending as
              follows:
              <form action="UploadTestServlet" enctype="multipart/form-data" method=POST>
              File: <input type=file name=file><br>
              <input type=submit>
              </form>
              This will send your file to be processed by the UploadTestServlet. You need to
              code UploadTestServlet yourself to parse and extract useful data. check out
              www.servlets.com for a utility class that does just that
              Winston
              Mohammed Ali Usmani wrote:
              > Hi to All;
              >
              > I want to know if I can use weblogic (webserver) for file uploading from
              > client browser without using any ftp server.
              > Do I have to use some special code (may be in my servlet/html page) for
              > handling this. I mean that do I have to provide the implementation of RFC
              > 1867 by myself at server side?
              >
              > Or it is just merly a browser support? It doesn't effect the webserver at
              > all?
              >
              > Thanks
              

  • Does SAP provide a standard tool that can make the SAP Hot Backup ?

    Dear Guru ,
    We are planning a Disaster Recover Plan . And we eager that we have one Hot Backup SAP Production system ...
    The idea is like that :
    1 . Real Production System transfer redo log or archive log to Hot Backup Server in every 15 minutes .
    2 . Hot Backup Server refresh the database base on the redo log or archive log .
    3 . Once Real Production System shutdown , the Hot Backup server can be as the Real Production system for daily usage .
    Is SAP providing this kind of tool as well ?
    Thanks a lot .
    Best Regards,
    Carlos Zhang

    SAP runs on many combinations of databases and operating systems. The database vendors usually have methods and tools to do what you want so no, SAP doesn't provide any tools because SAP is only the application using the database.
    You'll have to ask your database vendor.
    Markus

  • Does Oracle provide public Symbol Files (PDB) for OCCI/OCI ?

    When debugging an application under Windows (with Visual Studio or WinDBG) that makes use of OCCI it would often be convenient if there be symbol files (PDB files) for the Oracle OCI/OCCI libraries. ( [public symbol files|http://msdn.microsoft.com/en-us/library/ff553493%28VS.85%29.aspx] , just as Microsoft makes available for all system libraries)
    Does Oracle provide these?
    thanks,
    Martin

    Hi,
    I have this bug opened http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=7191593 and http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=7175004.
    I also opened Jetty bug https://bugs.eclipse.org/bugs/show_bug.cgi?id=335813 and It sounds like it is a JVM on windows 2008 problem..
    In order to investigate it further I also need these .pdb files which I am trying to get with no success (http://stackoverflow.com/questions/12265573/looking-for-java-pdb-files-analyze-a-crash-hdmp-file)
    Thanks.

  • Does OBIEE provide any tool or API for creating documentation for the RPD.

    Hi,
    I have a requirement to generate a user guide type of doc for a given subject area which should list following details.
    1. All the objects name and description entered for each objects in presentation layer.
    2. All the columns of each objects and their description entered in the presentation layer.
    3. All the objects and their hierarchies.
    Does OBIEE provide any tool or API through which we can generate documentation having these informations automatically?

    HI Venkat,
    Thanks for the reply. I have one question. If I give a description for any object or it's columns, that doesn't appear if I use Repository Documentation utility given in your link.
    Also if I populate the table from the flat file it generates and import into physical layer and bring into Presentation layer. It gives consistency check error while saving and in BI Answer I can't see any columns of that table. Do you have any workaround for that?
    I have also seen your other Article of Generating Metadata Dictionary. How is this different then the one you suggested.
    Thanks,
    Niraj

  • Online Meet-up 3. Does SAP provide explicit support for ALE?

    hi,  
        yes, it does support.
    for details on what is ALE please refer
    Online Meet-up, 4. What is ALE?
    regards,
    arul sekar

    Please refer to SLIDE NO: 11 of the On-line Meetup Presentation for details on where ALE fits in SAP context.
    It is between AII and Device controller.
    regards,
    arul sekar.

  • Does SAP provide  visual funciton for configuration of business process  ?

    I mean ,take the defining the sales process for example, a company may have many types sales,the standard sales process, sales without delivery, sales with delivery by other companies so on and so forth.
    Can I have a visual configuration which makes the work easier.   I mean finish the process definition by just picking ,dragging the relevant icons which represent different documents type.
    I know,oralce EBS and many other ERP have such functions.
    BTW. I am a novice at SAP.
    thank you very much
    Edited by: humility on Dec 15, 2008 4:25 AM

    Hi,
    I understood your requirement as, you would like to have a  pre-configured set for every business process like sales, returns etc... These pre-configured solution r available in SAP in terms of BC set, more information you can get in the SAP Best practise (http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm)  wer for every business process you can install the building block which SAP has created.
    Regards
    Mani

  • Does SAP have  function to allow the prices for the activities type to copy

    Hi Expert,
    Would like to seek for your help refer to above subject.
    Does SAP have  function to allow the prices for the activities type to copy from previuos fiscal year to current fiscal year so that we do not need to manually set up the acitvities types prices via KP26.
    What are the T-code and what are the configuration need to be set in order to use the function.
    Please help.
    Regards,
    KH

    Hi,
    Thank you for the prompt reply.
    However, would like to seek for your advise does SAP provide standard report to view the cost of activities incur?What are the T-code?
    Thank you.
    Regards,
    Karen

  • A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?

    A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?

    Sorry I do not know what the problem may be. <br />
    If no-one comes up with better ideas of what causes this then my questions and suggestions:
    What do you mean by an infinite loop ? <br />
    The page loads and then goes blank. What exactly happens next, does the page fully load and fully display again before going blank, and repeat this cycle endlessly in the same tab.
    You do say the problem persisted in safe-mode and you had looked at the basic troubleshooting article. Buy that you can stop the problem by disabling javascript.
    * did you disable all plugins - and did you still get the problem then ?
    As you mention disabling javascript stops the problem, have you tried with<br /> Java script enabled but
    * block popups ON
    * load images automatically OFF
    * advanced options - ALL OFF<br /> What happens do you get the problem then or not.
    While on this firefox site if I look at the error console Ctrl+Sift+J or Tools -> Error console If I clear the console content and reload the webpage the error console shows only a couple of messages. YouTube home page give a lot of yellow triangle warnings about 200, but no red warnings, do you get red warnings.
    You could also try on the problem sites eg YouTube changing the permissions with tools -> Page Info | Permissions
    Did you try the Basic Troubeshooting suggestion of making a new profile. (Heeding the warning not to delete settings, otherwise you loose all bookmarks etc) did that help ?

Maybe you are looking for