Does SAP support incremental/delta backups? if so which note describes it

I'm just about to test incremental/delta backups on udb 9.5 fp1. Now to my question:
Does SAP support incrmental/delta backups?
Is there a note, I couldnt get a hit on OSS
Are there any gotcha's? such as do I need to move read only tables to a new talbespace?
Any info on this is greatly appreciated.
Anke

Hi Anke,
You can specify whether you want to perform a full, incremental or incremental delta backup and the frequency via DB13 or the planning calender in DBACOCKPIT.
SAP Note 1269697 DB6: Backup Performance
should be of use to you and please also see our administration guide available at our main page
https://www.sdn.sap.com/irj/sdn/db6 under Administration. Specifically check the guide
"Data Recovery and High Availability Guide and Reference" mentioned in Chapter 8.3.5 Advanced Backup Techniques
There is not a specific SAP note relating to incremental/delta backups but they can be scheduled via DB13 and so, they are supported.
Regards,
Paul

Similar Messages

Does SAP support Solaris 10 ZFS filesystem when using DB2 V9.5 FP4?

Hi,
I'm installing NW7 (BI usage). SAPINST has failed in the step "ABAP LOAD due to the DB2 error message
"Unsupported file system type zfs for Direct I/O". It appears my Unix Admin must have decided to set these filesystems as ZFS on this new server.
I have several questions requiring your expertise.
1) Does SAP support ZFS filesystems on Solaris 10 (SPARC hardware)? I can not find any reference in SDN or Service Market Place? Any reference will be much appreciated.
2) How can I confirm my sapdata fielsystems are ZFS?
3) What actions do you recommend for me to resolve the SAPINST errors? Do I follow the note "Note 995050 - DB6: NO FILE SYSTEM CACHING for Tablespaces" to disable "Direct I/O" for all DB2 tablespaces? I have seen Markus Doehr's forum Link:[ thread|Re: DB2 on Solaris x64 - ZFS as filesystem possible?; but it does not state exactly how he overcame the error.
regards
Benny

Hi Frank,
Thanks for your input.
I have also found the command "zfs list" that would display any ZFS filesystems.
We have also gone back to UFS as the ZFS deployment schedule does not meet this particular SAP BW implementation timeline.
Has any one come across any SAP statement that states NW7 can be deployed with ZFS for DB2 database on Solaris SPARC platform. If not, I'll open an OSS message.
regards
Benny

Does SAP support open tender process for Vendor selection

Hi all,
Does SAP Support Open tendering process for Vendor Selection.
I men in my clients scenario. For vendor selection process for any material starts with advertisement of tender in newspaper. Vendor replies back with his quotation. After receiving technical and commercial quotation, the organization go for technical bidding and those who qualify in technical bidding they contest for commercial bidding. After commercial bidding, comparative statement is prepared and then purchase committee approves the vendor. The problem is that any no. of vendors from any where can give their reply to the tender as it is a government organization. So, how to map this process in SAP as we are not directly sending RFQ to the vendor, instead he reply back with quotation directly once he sees the advertisement in newspaper.
I want you all to suggest me whether to keep this process in SAP or out of SAP. waiting for your response.
Regards,
Amit

Hi Ravi,
Thanks for your response. My problem is that the organization advertise its tender in newspaper of all india circulation and seeing that tender vendor reply back with quotation. They don't identify who all are the vendors to whom RFQ is send. only when reply of vendor comes with quotation client comes to know about the vendors submitting quotation. Normally one vendor is selected for one material and 20 to 25 vendors give their quotation. Is it feasible to bring those 25 vendors in SAP if only one will be selected. Because in any way, for any processing we need to create vendor in SAP. So do we need to create 25 vendors, though we know we require only one finally. Can you please clarify this issue. If you want I can mail you the whole process map.
Thanks & Regards,
Amit

Does SAP supports transport of TPZ files from PI7.11 to XI3.0 ???

Hi,
Does SAP supports transport of TPZ files from PI7.11 to XI3.0 ???
because after Pasting PI7.11 .tpz files into import directory of Development XI3.0 .. I am not able to find these files into ID/IR -Tools - Import ?
What could be reason ??
Regards
PS

Have check this note :Note 1247043 - Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1
BC-XI-CON-SOP
No release
XI 3.0 message protocol in the SOAP adapter
Supported with EHP 1 for SAP NetWeaver Process Integration 7.1 (version abbreviated with 7.11 from now on) is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and ABAP proxies generated in the SAP NetWeaver Process Integration versions 3.0, 7.0, 7.10, 7.11; Advanced Adapter Engine version 7.11 and 7.10; SAP Partner Connectivity Kit version 7.11 and below, Java SE Adapter Engine 7.11 and below, Integration Server 7.11. However for all above listed scenarios the following functions are currently not supported: Acknowledgements, Transport & message level security, Principal propagation, Bulk support on sender-side, HTTP destinations support. Not supported with EHP 1 for SAP NetWeaver Process Integration 7.1 is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and Java proxies, Integration Server 7. 10 and below.
( Changed at 18.12.2009 )
Regards
Pothana

Does SAP support running Solaris10 X64 X86 on VMWARE?

Does SAP support running Solaris10 X64 X86 on VMWARE?
Thanks.

Hello,
no, Solaris 10 as guest OS in a VMware ESX environment is not supported for productive usage.
Rgds,
Roland Wartenberg
SAP
SAP Virtualization Week 2010 is coming
April 13-15, 2010
www.sapvweek.com

Does SAP Support the "XML Process Definition Language" (XPDL)

Does SAP support XPDL. IF not what is the alternative standard that they support?
regards,
Thomas

As far as I know there isn't any support for XML process description language. they only alternative is OMG BPDL, which is still under work.
Many people tend to compare XPDL to BPEL, although it is not so right. I think that this link http://kswenson.wordpress.com/2006/05/26/bpmn-xpdl-and-bpel/ explain it.
HTH,
Natty Gur.

Does SAP support JVM 1.5.0 for the SAPgui 6.40 Rev 6 for the Mac?

On Tuesday evening, Apple released a software update for Java 2 Platform Standard Edition (J2SE) 5.0 Release 4 for Mac OS X v10.4.5 or later. When you install the update, it will change the default version of Java virtual machine from Java 1.4.2 to Java 1.5.0. Apple also posted instructions for changing the default back to Java 1.4.2 at <http://docs.info.apple.com/article.html?artnum=303526>.
When I launch SAPgui 6.40 Rev 4 or SAPgui 6.40 Rev 6 for the Mac, they both now use JVM 1.5.0. Does SAP support that, or should I follow Apple's instructions for changing the default JVM back to 1.4.2?
Here is the information from the "About SAPgui" boxes.
SAPGUI for Java 6.40 rev 4
(Version ID 064000040400)
Build: Thu Sep 1 02:10:41 MEST 2005 on uw1059
Java VM: Apple Computer, Inc. Version 1.5.0_06-64
OS: Mac OS X(ppc) Version 10.4.6
APGUI for Java 6.40 rev 6
(Version ID 064000040600)
Build: Wed Dec 21 13:01:37 MET 2005 on uw1059
Java VM: Apple Computer, Inc. Version 1.5.0_06-64
OS: Mac OS X(ppc) Version 10.4.6

Hello,
as indicated in the system requirements of SAP GUI for Java 6.40, JRE 1.4.2 is the only supported Java version on any of the platforms including Mac OS X.
Current Mac versions of SAP GUI for Java 6.40 unfortunately do not block usage of JRE 5.0 after installing Java 2 Platform Standard Edition (J2SE) 5.0 Release 4, which causes latter to become the Java default.
We have discovered this recently and starting with the next revision of SAP GUI for Java 6.40 we will make sure that it uses JRE 1.4.2 independent from the Java default.
Until then, it is required to change the Java default back to 1.4.2 like described in http://docs.info.apple.com/article.html?artnum=303526 in order to avoid unpredictable issues.
It is planend to support JRE 5.0 with the upcoming SAP GUI for Java 7.00 on all platforms including Mac OS X.
Best regards
Rolf-Martin Woersinger
SAP GUI for Java development

Does Sap Supports Linux

Dear Masters..
Please Let me Know Does Sap Supports Linux OS other than XP
Zubair

Hi Mohamed
From the SAP Portal:-
The application supports the Microsoft SQL Server database. Additional system requirements are Microsoft Windows Server (2003 R2, 2003 SP1), Microsoft Windows Business Server (2003 R2, 2003 SP1) and Microsoft Windows XP SP2 (standalone installations only) as well as Microsoft Windows XP SP2 Professional (workstation platforms). The application also supports Microsoft Office (2003 SP1, 2007 und XP SP2). Further Windows operating systems will be supported in the future. The open architecture of SAP Business One will integrate with SAP Business Suite, as well as other independent software vendors, allowing companies to realize the extensive benefits of SAP from the largest division to the smallest subsidiary.
So it seems that Linux is not an option at present
Daan

Does SAP Support Adobe Acrobat 8.1.4 ?????

Hello Colleagues,
I just want to now which all versions of Adobe SAP supports and in particular if Adobe Acrobat 8.1.4
is supported.
Thanks & Regards,
Kavitha.

Captivate 4 is sold als a separate product, but you can also find it in the eLearning Suite, which contains also Acrobat 9 Pro (but also Flash CS4, Dreamweaver CS4, Photoshop CS4, Soundbooth CS4...etc). Acrobat Reader (version 9 for the moment) is indeed completely free. Why do you ask this question: thinking about integrating Captivate in pdf-documents?

Does SAP support Oracle SDO

Please state the system database server component of the SAP solution with specific reference to database supported :-
Oracle SDO (Spatial)

Hi,
AFAIK, no SAP product use Oracel Spatial. This can be confirmed on the SAP note [740897: Info about the Oracle license scope; Required Oracle options|http://service.sap.com/sap/support/notes/740897]

Does SAP support work and motion study

Does any of the SAP module supports Time and motion study analysis. Something like the "Maynard Operation Sequence Technique (MOST)"

Yes..I got a reply from SAP. It is valid for ECC 6 too.

Does SAP support the Contractor Witholding Regulations REG-158747-06

Purchasing and payments is not an area I am very familiar with. I am trying to get enough information to determine what sort of assistance we will need.
Can anybody tell me if the new IRS Contractor Withholding mandate (REG-158747-06 [http://www.irs.gov/govt/fslg/article/0,,id=204409,00.html] that is to start effective 1/1/2012 can be configured through "normal" configuration in SAP R/3 4.7?
As a quick summary I understand if you have a contract for a vendor that exceeds $10,000/year or monthly payments to a vendor that exceed $10,000 you will be required to withhold 3% taxes to be paid to the IRS.
Any direction insight to this would be greatly appreciated.

GigabitEthernet0 unassigned YES unset up down
The AP has a faulty NIC card. Contact Cisco TAC to get it replaced.

Does SAP support GLNs?

Hello gurus,
we would like to use GLNs (Global Location Number, GS1 standard) to identify our various locations for our vendors. I.e. we would like to specifiy the delivery point in our POs using GLNs.
Is this possible in SAP? Where would I maintain the GLNs for the various storag locations and what PO-field could I use to communicate the GLN to our vendor via iDocs?
Thanks in advance
Alicia

G'day Alicia,
SAP prior to ECC6 has nothing. We have had to implement our own version including a Z-Table that mapps Plants and Storage Locations with Vendors and customised a user exit to deal with all this.
We are curently upgrading to ECC6 and I have found a new table V_EAN_GLN
Here you can choose to use:
Company Code
Purchasing Organization
Shipping Point
Plant
Sales Organization
But not Storage Locations. Which seems strange so i am not sure how it can be used.
Hope this informs but I dont think it helps!
Thanks
Luke

Does SAP still supports WCEM or it only supports Hybris?

Dear Experts,
Does SAP still supports WCEM or it only supports Hybris?
If we are going for new implementation on Web channel for one of our client, does SAP supports this or will it suggest for Hybris?
Best regards,
VZAY

Hello,
BPC 10 does not support SQL 2014 yet. It will in a future SP release but that is still tentative. BPC 10.1 SP02 is scheduled to support it but that too is tentative as well.
You may want to review SAP KB-1486745 - Does BPC support SQL Server
Developer Edition?
Thanks,
April

Regarding SAP supporting modules

Hi all,
My client is interested to implement SAP for shipping project. The system should be able to cater jetty, container terminals, Finance, HR, Logistics, Warehouse etc. It should also be able to integrate with multiple legacy systems developed earlier on J2EE technologies. Does SAP supports all the specified modules integrations? If not? Suggest me the other alternative please.
thanks in advance

Hi,
Yes the SAP system supports all the modules which you have mensioned above.So in order to integrate these modules u would have different steps to follow integration and also interfaces to carry. Yes SAP supports all the specified module integration. See to that the basis consultants and abapers set the interfaces and other settings correctly.
Regards
Can quary back if u have any issue
Asha

Does SAP support incremental/delta backups? if so which note describes it

Similar Messages

Maybe you are looking for