Does SAP Support the "XML Process Definition Language" (XPDL)

Does SAP support XPDL. IF not what is the alternative standard that they support?
regards,
Thomas

As far as I know there isn't any support for XML process description language. they only alternative is OMG BPDL, which is still under work.
Many people tend to compare XPDL to BPEL, although it is not so right. I think that this link http://kswenson.wordpress.com/2006/05/26/bpmn-xpdl-and-bpel/ explain it.
HTH,
Natty Gur.

Similar Messages

Does SAP support open tender process for Vendor selection

Hi all,
Does SAP Support Open tendering process for Vendor Selection.
I men in my clients scenario. For vendor selection process for any material starts with advertisement of tender in newspaper. Vendor replies back with his quotation. After receiving technical and commercial quotation, the organization go for technical bidding and those who qualify in technical bidding they contest for commercial bidding. After commercial bidding, comparative statement is prepared and then purchase committee approves the vendor. The problem is that any no. of vendors from any where can give their reply to the tender as it is a government organization. So, how to map this process in SAP as we are not directly sending RFQ to the vendor, instead he reply back with quotation directly once he sees the advertisement in newspaper.
I want you all to suggest me whether to keep this process in SAP or out of SAP. waiting for your response.
Regards,
Amit

Hi Ravi,
Thanks for your response. My problem is that the organization advertise its tender in newspaper of all india circulation and seeing that tender vendor reply back with quotation. They don't identify who all are the vendors to whom RFQ is send. only when reply of vendor comes with quotation client comes to know about the vendors submitting quotation. Normally one vendor is selected for one material and 20 to 25 vendors give their quotation. Is it feasible to bring those 25 vendors in SAP if only one will be selected. Because in any way, for any processing we need to create vendor in SAP. So do we need to create 25 vendors, though we know we require only one finally. Can you please clarify this issue. If you want I can mail you the whole process map.
Thanks & Regards,
Amit

Does SAP support the Contractor Witholding Regulations REG-158747-06

Purchasing and payments is not an area I am very familiar with. I am trying to get enough information to determine what sort of assistance we will need.
Can anybody tell me if the new IRS Contractor Withholding mandate (REG-158747-06 [http://www.irs.gov/govt/fslg/article/0,,id=204409,00.html] that is to start effective 1/1/2012 can be configured through "normal" configuration in SAP R/3 4.7?
As a quick summary I understand if you have a contract for a vendor that exceeds $10,000/year or monthly payments to a vendor that exceed $10,000 you will be required to withhold 3% taxes to be paid to the IRS.
Any direction insight to this would be greatly appreciated.

GigabitEthernet0 unassigned YES unset up down
The AP has a faulty NIC card. Contact Cisco TAC to get it replaced.

BPE_adapter The process does not support the given synchronous interface

We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks

Does SAP support JVM 1.5.0 for the SAPgui 6.40 Rev 6 for the Mac?

On Tuesday evening, Apple released a software update for Java 2 Platform Standard Edition (J2SE) 5.0 Release 4 for Mac OS X v10.4.5 or later. When you install the update, it will change the default version of Java virtual machine from Java 1.4.2 to Java 1.5.0. Apple also posted instructions for changing the default back to Java 1.4.2 at <http://docs.info.apple.com/article.html?artnum=303526>.
When I launch SAPgui 6.40 Rev 4 or SAPgui 6.40 Rev 6 for the Mac, they both now use JVM 1.5.0. Does SAP support that, or should I follow Apple's instructions for changing the default JVM back to 1.4.2?
Here is the information from the "About SAPgui" boxes.
SAPGUI for Java 6.40 rev 4
(Version ID 064000040400)
Build: Thu Sep 1 02:10:41 MEST 2005 on uw1059
Java VM: Apple Computer, Inc. Version 1.5.0_06-64
OS: Mac OS X(ppc) Version 10.4.6
APGUI for Java 6.40 rev 6
(Version ID 064000040600)
Build: Wed Dec 21 13:01:37 MET 2005 on uw1059
Java VM: Apple Computer, Inc. Version 1.5.0_06-64
OS: Mac OS X(ppc) Version 10.4.6

Hello,
as indicated in the system requirements of SAP GUI for Java 6.40, JRE 1.4.2 is the only supported Java version on any of the platforms including Mac OS X.
Current Mac versions of SAP GUI for Java 6.40 unfortunately do not block usage of JRE 5.0 after installing Java 2 Platform Standard Edition (J2SE) 5.0 Release 4, which causes latter to become the Java default.
We have discovered this recently and starting with the next revision of SAP GUI for Java 6.40 we will make sure that it uses JRE 1.4.2 independent from the Java default.
Until then, it is required to change the Java default back to 1.4.2 like described in http://docs.info.apple.com/article.html?artnum=303526 in order to avoid unpredictable issues.
It is planend to support JRE 5.0 with the upcoming SAP GUI for Java 7.00 on all platforms including Mac OS X.
Best regards
Rolf-Martin Woersinger
SAP GUI for Java development

This app does not support the language of the OS adobe illustrator

this app does not support the language of the OS adobe illustrator
The system language is Russian, so fellow connoisseurs help someone is not difficult

What system? What version of AI? You need to be more specific.
Mylenium

Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.

Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using.

Does SAP supports transport of TPZ files from PI7.11 to XI3.0 ???

Hi,
Does SAP supports transport of TPZ files from PI7.11 to XI3.0 ???
because after Pasting PI7.11 .tpz files into import directory of Development XI3.0 .. I am not able to find these files into ID/IR -Tools - Import ?
What could be reason ??
Regards
PS

Have check this note :Note 1247043 - Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1
BC-XI-CON-SOP
No release
XI 3.0 message protocol in the SOAP adapter
Supported with EHP 1 for SAP NetWeaver Process Integration 7.1 (version abbreviated with 7.11 from now on) is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and ABAP proxies generated in the SAP NetWeaver Process Integration versions 3.0, 7.0, 7.10, 7.11; Advanced Adapter Engine version 7.11 and 7.10; SAP Partner Connectivity Kit version 7.11 and below, Java SE Adapter Engine 7.11 and below, Integration Server 7.11. However for all above listed scenarios the following functions are currently not supported: Acknowledgements, Transport & message level security, Principal propagation, Bulk support on sender-side, HTTP destinations support. Not supported with EHP 1 for SAP NetWeaver Process Integration 7.1 is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and Java proxies, Integration Server 7. 10 and below.
( Changed at 18.12.2009 )
Regards
Pothana

Does SAP support Solaris 10 ZFS filesystem when using DB2 V9.5 FP4?

Hi,
I'm installing NW7 (BI usage). SAPINST has failed in the step "ABAP LOAD due to the DB2 error message
"Unsupported file system type zfs for Direct I/O". It appears my Unix Admin must have decided to set these filesystems as ZFS on this new server.
I have several questions requiring your expertise.
1) Does SAP support ZFS filesystems on Solaris 10 (SPARC hardware)? I can not find any reference in SDN or Service Market Place? Any reference will be much appreciated.
2) How can I confirm my sapdata fielsystems are ZFS?
3) What actions do you recommend for me to resolve the SAPINST errors? Do I follow the note "Note 995050 - DB6: NO FILE SYSTEM CACHING for Tablespaces" to disable "Direct I/O" for all DB2 tablespaces? I have seen Markus Doehr's forum Link:[ thread|Re: DB2 on Solaris x64 - ZFS as filesystem possible?; but it does not state exactly how he overcame the error.
regards
Benny

Hi Frank,
Thanks for your input.
I have also found the command "zfs list" that would display any ZFS filesystems.
We have also gone back to UFS as the ZFS deployment schedule does not meet this particular SAP BW implementation timeline.
Has any one come across any SAP statement that states NW7 can be deployed with ZFS for DB2 database on Solaris SPARC platform. If not, I'll open an OSS message.
regards
Benny

The Organizer does not support the color space in the file

I just purchased and installed PSE 8 as an upgrade to PSE 6. My catalog correctly shows all of my existing images. However, when I try to import photos into the Organizer, I get a message that nothing was imported. The reason given is that "The Organizer does not support the color space in the file." This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS. Any suggestions?
Here is my system information:
Elements Organizer 8.0.0.0
Core Version: 8.0 (20090905.r.605812)
Language Version: 8.0 (20090905.r.605812)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
Catalog Size: 83.9MB
Catalog Cache Size: 459.8MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 2GB
Free Memory: 829MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.65
Adobe Reader Version: 9.2
Adobe Acrobat Version: Not installed
CD and DVD drives:
J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard

Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-

Hi
This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
Connecting the Wedge Mobile Keyboard to a tablet PC
By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
Pair your keyboard through SSP without a passkey
Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
Select Add a device.
When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
Note
If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only.

Does XDB supports validating xml against multiple schemas?

The XMLType has some methods for validating an xml documents against a schema, e.g., SCHEMAVALIDATE, etc.. does XDB support validating xml against multiple schemas (Just like what JAXP or Xerces have done)? Or what's the current situation about this issue? thanks.

did you try using the import schema element instead of the include elemnt?

How does java support the concept of destructor?

How does java support the concept of destructor?

@KunalSurana: before you flood the forum with basic questions, do us a favour and read.
[Sun's basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
[Sun's New To Java Center|http://java.sun.com/learning/new2java/index.html]
Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
jGuru
A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch
To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
[Yawmarks List|http://forums.devshed.com/java-help-9/resources-for-learning-java-249225.html]
[The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance]
[http://javaalmanac.com|http://javaalmanac.com]
Bruce Eckel's [Thinking in Java(Available online.)|http://mindview.net/Books/DownloadSites]
Joshua Bloch's [Effective Java|http://www.amazon.co.uk/exec/obidos/Author=Bloch,%20Josh]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance ]
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]
Gosling is the creator of Java. It doesn't get much more authoritative than this.
Joshua Bloch and Neal Gafter [Java Puzzlers.|http://www.javapuzzlers.com/]

Does SAP support incremental/delta backups? if so which note describes it

I'm just about to test incremental/delta backups on udb 9.5 fp1. Now to my question:
Does SAP support incrmental/delta backups?
Is there a note, I couldnt get a hit on OSS
Are there any gotcha's? such as do I need to move read only tables to a new talbespace?
Any info on this is greatly appreciated.
Anke

Hi Anke,
You can specify whether you want to perform a full, incremental or incremental delta backup and the frequency via DB13 or the planning calender in DBACOCKPIT.
SAP Note 1269697 DB6: Backup Performance
should be of use to you and please also see our administration guide available at our main page
https://www.sdn.sap.com/irj/sdn/db6 under Administration. Specifically check the guide
"Data Recovery and High Availability Guide and Reference" mentioned in Chapter 8.3.5 Advanced Backup Techniques
There is not a specific SAP note relating to incremental/delta backups but they can be scheduled via DB13 and so, they are supported.
Regards,
Paul

Does SAP Support the "XML Process Definition Language" (XPDL)

Similar Messages

Maybe you are looking for