Does SAP supports transport of TPZ  files from PI7.11 to XI3.0 ???

Hi,
Does SAP supports transport of TPZ  files from PI7.11 to XI3.0 ???
because after Pasting PI7.11 .tpz files into import directory of Development XI3.0 .. I am not able to find these files into ID/IR -Tools - Import ?
What could be reason ??
Regards
PS

Have check this note :Note 1247043 - Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1
BC-XI-CON-SOP
No release
XI 3.0 message protocol in the SOAP adapter
Supported with EHP 1 for SAP NetWeaver Process Integration 7.1 (version abbreviated with 7.11 from now on) is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and ABAP proxies generated in the SAP NetWeaver Process Integration versions 3.0, 7.0, 7.10, 7.11; Advanced Adapter Engine version 7.11 and 7.10; SAP Partner Connectivity Kit version 7.11 and below, Java SE Adapter Engine 7.11 and below, Integration Server 7.11. However for all above listed scenarios the following functions are currently not supported: Acknowledgements, Transport & message level security, Principal propagation, Bulk support on sender-side, HTTP destinations support. Not supported with EHP 1 for SAP NetWeaver Process Integration 7.1 is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and Java proxies, Integration Server 7. 10 and below.
( Changed at 18.12.2009 )
Regards
Pothana

Similar Messages

  • Transport of  .tpz files from PI 7.0 to PI 7.10

    Hi Experts,
                      I am planning to transfer the developed Interfaces from PI 7.0 to PI 7.10. Has any one have done it before? do I need to do any manual configuration or Developments again to run the Interface perfectly?.
    Expecting some valuable answers... please..
    Thanks and Regards,
    Sunil

    Hi Jag,
                  Thanks for the reply, but in decision making document I have read that if we have few interfaces then we can move those interfaces in to PI 7.10. But if we have more interfaces it will be difficult to handle.
    Does anyone have moved complex scenarios consisting of Many BS, Many Interfaces (more than 100), Many proxies, Long running BPM scenarios. If its so please provide some details on the same,
    Your valuable replies are always appreciated.
    Thanks in advance,
    Sunil
    Norway.

  • Does SAP support Solaris 10 ZFS filesystem when using DB2 V9.5 FP4?

    Hi,
    I'm installing NW7 (BI usage). SAPINST has failed in the step "ABAP LOAD due to the DB2 error message
    "Unsupported file system type zfs for Direct I/O". It appears my Unix Admin must have decided to set these filesystems as ZFS on this new server.
    I  have several questions requiring your expertise.
    1) Does SAP support ZFS filesystems on Solaris 10 (SPARC hardware)? I can not find any reference in SDN or Service Market Place? Any reference will be much appreciated.
    2) How can I confirm my sapdata fielsystems are ZFS?
    3) What actions do you recommend for me to resolve the SAPINST errors? Do I follow the note "Note 995050 - DB6: NO FILE SYSTEM CACHING for Tablespaces" to disable "Direct I/O" for all DB2 tablespaces? I have seen Markus Doehr's forum Link:[ thread|Re: DB2 on Solaris x64 - ZFS as filesystem possible?; but it does not state exactly how he overcame the error.
    regards
    Benny

    Hi Frank,
    Thanks for your input.
    I have also found  the command "zfs list" that would display any ZFS filesystems.
    We have also gone back to UFS as the ZFS deployment schedule does not meet this particular SAP BW implementation timeline.
    Has any one come across any SAP statement that states NW7 can be deployed with ZFS for DB2 database on Solaris SPARC platform. If not, I'll open an OSS message.
    regards
    Benny

  • Does SAP support open tender process for Vendor selection

    Hi all,
    Does SAP Support Open tendering process for Vendor Selection.
    I men in my clients scenario. For vendor selection process for any material starts with advertisement of tender  in newspaper. Vendor replies back with his quotation. After receiving technical and commercial quotation, the organization go for technical bidding and those who qualify in technical bidding they contest for commercial bidding. After commercial bidding, comparative statement is prepared and then purchase committee approves the vendor. The problem is that any no. of vendors from any where can give their reply to the tender as it is a government organization. So, how to map this process in SAP as we are not directly sending RFQ to the vendor, instead he reply back with quotation directly once he sees the advertisement in newspaper.
    I want you all to suggest me whether to keep this process in SAP or out of SAP. waiting for your response.
    Regards,
    Amit

    Hi Ravi,
    Thanks for your response. My problem is that the organization advertise its tender in newspaper of all india circulation and seeing that tender vendor reply back with quotation. They don't identify who all are the vendors to whom RFQ is send. only when reply of vendor comes with quotation client comes to know about the vendors submitting quotation. Normally one vendor is selected for one material and 20 to 25 vendors give their quotation. Is it feasible to bring those 25 vendors in SAP if only one will be selected. Because in any way, for any processing we need to create vendor in SAP. So do we need to create 25 vendors, though we know we require only one finally. Can you please clarify this issue. If you want I can mail you the whole process map.
    Thanks & Regards,
    Amit

  • Does SAP support JVM 1.5.0 for the SAPgui 6.40 Rev 6 for the Mac?

    On Tuesday evening, Apple released a software update for Java 2 Platform Standard Edition (J2SE) 5.0 Release 4 for Mac OS X v10.4.5 or later. When you install the update, it will change the default version of Java virtual machine from Java 1.4.2 to Java 1.5.0. Apple also posted instructions for changing the default back to Java 1.4.2 at <http://docs.info.apple.com/article.html?artnum=303526>.
    When I launch SAPgui 6.40 Rev 4 or SAPgui 6.40 Rev 6 for the Mac, they both now use JVM 1.5.0. Does SAP support that, or should I follow Apple's instructions for changing the default JVM back to 1.4.2?
    Here is the information from the "About SAPgui" boxes.
    SAPGUI for Java 6.40 rev 4
    (Version ID 064000040400)
    Build: Thu Sep 1 02:10:41 MEST 2005 on uw1059
    Java VM: Apple Computer, Inc. Version 1.5.0_06-64
    OS: Mac OS X(ppc) Version 10.4.6
    APGUI for Java 6.40 rev 6
    (Version ID 064000040600)
    Build: Wed Dec 21 13:01:37 MET 2005 on uw1059
    Java VM: Apple Computer, Inc. Version 1.5.0_06-64
    OS: Mac OS X(ppc) Version 10.4.6

    Hello,
    as indicated in the system requirements of SAP GUI for Java 6.40, JRE 1.4.2 is the only supported Java version on any of the platforms including Mac OS X.
    Current Mac versions of SAP GUI for Java 6.40 unfortunately do not block usage of JRE 5.0 after installing Java 2 Platform Standard Edition (J2SE) 5.0 Release 4, which causes latter to become the Java default.
    We have discovered this recently and starting with the next revision of SAP GUI for Java 6.40 we will make sure that it uses JRE 1.4.2 independent from the Java default.
    Until then, it is required to change the Java default back to 1.4.2 like described in http://docs.info.apple.com/article.html?artnum=303526 in order to avoid unpredictable issues.
    It is planend to support JRE 5.0 with the upcoming SAP GUI for Java 7.00 on all platforms including Mac OS X.
    Best regards
    Rolf-Martin Woersinger
    SAP GUI for Java development

  • Does Sap Supports Linux

    Dear Masters..
                            Please Let me Know Does Sap Supports Linux OS other than XP
    Zubair

    Hi Mohamed
    From the SAP Portal:-
    The application supports the Microsoft SQL Server database. Additional system requirements are Microsoft Windows Server (2003 R2, 2003 SP1), Microsoft Windows Business Server (2003 R2, 2003 SP1) and Microsoft Windows XP SP2 (standalone installations only) as well as Microsoft Windows XP SP2 Professional (workstation platforms). The application also supports Microsoft Office (2003 SP1, 2007 und XP SP2). Further Windows operating systems will be supported in the future. The open architecture of SAP Business One will integrate with SAP Business Suite, as well as other independent software vendors, allowing companies to realize the extensive benefits of SAP from the largest division to the smallest subsidiary.
    So it seems that Linux is not an option at present
    Daan

  • Does SAP support incremental/delta backups?  if so which note describes it

    I'm just about to test incremental/delta backups on udb 9.5 fp1.  Now to my question:
    Does SAP support incrmental/delta backups?
    Is there a note, I couldnt get a hit on OSS
    Are there any gotcha's?  such as do I need to move read only tables to a new talbespace?
    Any info on this is greatly appreciated.
    Anke

    Hi Anke,
    You can specify whether you want to perform a full, incremental or incremental delta backup and the frequency via DB13 or the planning calender in DBACOCKPIT.
    SAP Note 1269697 DB6: Backup Performance
    should be of use to you and please also see our administration guide available at our main page
    https://www.sdn.sap.com/irj/sdn/db6 under Administration. Specifically check the guide
    "Data Recovery and High Availability Guide and Reference" mentioned in Chapter 8.3.5 Advanced Backup Techniques
    There is not a specific SAP note relating to incremental/delta backups but they can be scheduled via DB13 and so, they are supported.
    Regards,
    Paul

  • Does SAP support running Solaris10 X64 X86 on VMWARE?

    Does SAP support running Solaris10 X64 X86 on VMWARE?
    Thanks.

    Hello,
    no, Solaris 10 as guest OS in a VMware ESX environment is not supported for productive usage.
    Rgds,
    Roland Wartenberg
    SAP
    SAP Virtualization Week 2010 is coming
    April 13-15, 2010
    www.sapvweek.com

  • Does SAP Support the "XML Process Definition Language" (XPDL)

    Does SAP support XPDL. IF not what is the alternative standard that they support?
    regards,
    Thomas

    As far as I know there isn't any support for XML process description language. they only alternative is OMG BPDL, which is still under work.
    Many people tend to compare XPDL to BPEL, although it is not so right. I think that this link http://kswenson.wordpress.com/2006/05/26/bpmn-xpdl-and-bpel/ explain it.
    HTH,
    Natty Gur.

  • Any chance that Aperture 3 soon will support the RAW format files from Leica V-lux 3?

    Any chance that Aperture 3 soon will support the RAW format files from Leica V-lux 3?

    Were all just users here no Apple employees so no one can say (and if Apple was here they wouldn't say either)'
    It's just not the type of information Apple gives out. You can go  to Aperture->Provide Aperture Feedback to let them know you want his camera included. But when that will happen is anyone's guess.
    One strategy you can use for the time being is to shoot RAW + JPG (assuming the camera has this mode) and import both as a RAW+JPG pair making the JPG the master. Then when the RAW support comes out you can switch and make the RAW the master and process the file.
    There are other ways to deal with this until the camera is supported. Post back for more info.
    regards

  • Does  BPM support the JAVA config file feature.

    Hi ,
    Does BPM support the JAVA config file feature? like based on env(local, dev, test, stage, prod) BPM aaplication can have different values for the same property/variable using the config file. How can BPM identify its env (local, dev, test, stage, prod)
    Thanks In Advance!
    Sreekant

    931907 wrote:
    Hello Robert,
    I am refering here to both C++ client and Coherence Server. Will it work in either of the cases?
    Thanks,
    JayHi Jay,
    Coherence server: it definitely won't do anything with C++.
    C++ client: for the cache store of a local cache residing within the C++ client you may be able to specify it, but it will have nothing to do with the cluster itself. I never worked with the C++ client, so I can't guarantee you can configure it that way. Look at the following page for further documentation:
    http://docs.oracle.com/cd/E24290_01/coh.371/e22839/cpp_config.htm
    Best regards,
    Robert

  • Error message of "video format not supported" for ATV1 for files from iTunes

    I have an ATV first generation, I had to redo my windows profile and now ATV is not syncing all my movies from iTunes. It says that ATV does not support the video format from movies I downloaded from Itunes.

    I've had this happen with a whole bunch of files over time. Usually it's a disk timeout - it just took too long for iTunes to start streaming the file to the Apple TV. Sometimes it's that the file has been moved/deleted/'lost' as Alley_Cat describes. Sometimes I think that the file has too high a bit rate to play on the old Apple TV or the audio isn't suitable for it.

  • Why does Aperture 3,not process RAW files from Leica D-Lux 5 ?

             Hello:
    The purchase of my Leica D-Lux 5 came with LR 3. All raw files can be processed in that Application.However.I also have Aperture 3 and it will not process RAW files from the D-Lux 5.I hope that Apple soon will address this inconvenience.Has anyone els had the same problem?
    Hoping for a solution;Thanks John Basso.  Mac OS X 10.6.7

    I can tell you that it does process them from Panasonic LX5's - I have one. The files are probably very similar with slightly different processing metadata and a different tag. It is possible to change the tag in the RAW file prior to import that "fools" aperture into thinking that the RAW is the same as a camera that is supported. I have done this with other cameras where the RAW files were really the same but the camera was not yet "officially supported" at the time I bought it.
    I kinda remember doing it to the EP-2 or was it the EPL-1? Don't remember but there are plenty of tools that will allow this - google is your friend.
    Just make sure that your install of Ap3/OS X DOES actually have support for the LX5... Might work but I have not tried it.
    RB

  • PSE 8 does not support Nikon 7000D RAW files?

    I just got a Nikon 7000D, and when I tried to open up one of the .NEF (RAW) files in PSE 8, it wasn't supported.  I researched the Camera RAW plug-in, and from what I can tell, PSE 8 is only compatible with Camera RAW up to version 6.2.  It looks like version 6.3 is only useable with PSE 9.
    Camera RAW 6.2 does not support files from the Nikon 7000D, or at least the list I saw does not show it, so I did not download 6.2.  Is my only choice for being able to use PSE 9 with my 7000D to spend the money on PSE 9?   -Bill C

    You could also download the standalone DNG converter and make DNG files (which you may be able to process in 6.2), or use the Nikon software to convert your files and do any additional editing in PSE.

  • [FEATURE REQUEST] - dlna client in Xperia WALKMAN Android app does not support flac or ogg files

    Hi, I have found a pretty bad bug in the dlna support in the WALKMAN android app for Xperia phones.
    Please could a mod or a community person who is in contact with the developers, pass this info on to them and ask them to please work on it.
    I have the latest updated Version 8.3.A.0.5 of the WALKMAN android app installed on a SONY XPERIA Z mobile phone and I have a dlna server set up and running on my local network.
    If I download, install and use the DNLA Total Media app available in the Google play store instead of the WALKMAN app, I can play flac and m4a files; no problem.
    However, if I use the WALKMAN app to browse to my dlna server and try to play flac or m4a files, I get a small black box on screen that says "Content not available."
    If I browse to and select an mp3 file instead, the WALKMAN app will play (stream) the mp3 file and no small black box will appear.
    So it looks like the dlna part of the SONY WALKMAN app is missing support for some audio file container types which are supported by default on the Android operating system and work natively in the WALKMAN app (I tested play back from internal storage.) I believe ogg format playback is missing also. Because it is not required by the dlna specification.
    Please improve file type support in the dlna client part of the WALKMAN app for XPERIA phones. People working in professional audio environments don't use mp3 anymore (And haven't done for over five years.)
    Thank You

    Thanks for the feedback!
    As you say, i believe the DLNA standard doesn't have any support for flac and ogg but i've seen some 3:rd party apps that can do it but i'm not sure if those uses DLNA in that case or just UPnP. I will forward your feedback though.
    The only solution for this that i know of today is to use a 3:rd party app or perhaps mount the share using SMB instead from Settings -> Storage.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for