Does Satellite P70-A-129 support the second HDD/SSD

I recently bought this model P70-A-129 from Greece, and i am wondering if it accepts a second HDD / SSD drive.
I opened the underneath cover and there is a second connector but i don't know if it is connected to the Main-board.
Can you assist me by telling me if this model can manage a second drive?
Thanks

Hi
Its easy to test this
You can try to connect the HDD placed in the first HDD bay to the 2nd HDD controller in the 2nd HDD bay. In case the BIOS would recognize the HDD properly, the upgrade should be possible.
Please check also this Toshiba Satellite P70 / Qosmio X70 HDD replacement procedure.
http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm
It shows you step by step instruction how to remove the HDD

Similar Messages

Which Satellite P300 and P200 have a second HDD connector?

Hi.
Does anyone know which Satellite P200 and P300 laptops have 2 HDD connectors installed?
Thanks.

Hi CrazyHorse
You are right not all model which are equipped with two HDD bays support two HDD connectors.
But I found some P300 which support the second HDD:
Google is your friend :D
P300-10H
P300-10Y
P300-126
P300-128
P300-13E
P300-142
P300-14J
P300-150
P300-15D
P300-167
P300-174
P300-17C
P300-185
P300-186
P300-18B
P300-18M
P300-193
P300-19A
P300-19F
P300-19M
P300-19Y
P300-1A2
P300-1AH
P300-1AN
P300-1AO
P300-1BB
P300-1C8
P300-1C9
P300-1CE
P300-1D7
P300-1DM
P300-1E7
P300-1FM
P300-1GB
P300-1GH
P300-1GI
P300-1GO
P300-1GU
P300-1H0
P300-202
P300-206
P300-20R
P300-20W
Cheers

Need wireless driver for Satellite P70-A-129

Hello to the Community.
I have reached a dead-end and after hours of efforts I need your input.
I have installed Windows 7 x64 on my Satellite P70-A-129 and although
I have downloaded all relevant drivers from the official support page,
and tried them all (Atheros/Qualcomm, Intel, Realtek)
the Wireless adapter is not functional as none of the drivers seems to be
the one needed.
All other subsystems/drivers are fully functional. I would enormously appreciate any
input as to where to look/what to do next.
Thank you in advance
Vassilis

Yes, BT installed without problems.
Intel driver, Intel Proset application, Realtek driver, all installed without problems.
The Atheros driver completed the installation but reported that it cannot find the adapter.
In ALL of the above cases the wireless adapter appears with the yellow exclamation point, just as
when there are no drivers at all.
At this point I must mention that the wireless adapter was fully functional right out of the box (Windows 8.1),
so there is no hardware problem (the laptop is two days old).
Right now I am re-installing W7 (after so many trials and since I am not going to proceed with
s/w installations unless all hardware components are fully functional) I figured what the h*** let's
try fresh......

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page i.e the reverse side of the page, in the correct direction?in the

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

Satellite P305-s8842: How do the 2 HDDs work together?

I have the Satellite P305-s8842, it comes with dual 200 gig HDD's.
I was wondering how they work together. The main one is almost full; when it fills all the way up will it automatically start filling the second HDD?
Right now there are only two files on the second one they are a temp folder and a msdia80.dll file.
Thanks in advance for the help.

Thanks for the reply
http://www.circuitcity.com/ssm/Toshiba-Satellite-P305-S8842-17-1-Widescreen-Laptop-P305S8842/sem/rpsm/oid/215101/catOid/-12963/rpem/ccd/productDetail.do is where you can find the laptop that I have (except it is actually fusion finish black instead of the weird teal color) It says it has a 400 gig hdd but it really has two 200 gigs.
Anyway, I don't really understand how it's supposed to be used. Please don't flame, I am pretty proficient with computers but this is the first one that I've had that has two hdd's. Just trying to understand how they work together. Thanks.
Message was edited by: raskal740

Duplicate music - one on the second HDD in the cloud - why is this happening?

Duplicate music - one on the second HDD in the cloud - why is this happening?

Hey xisem,
I'd give the steps in the following document a shot:
How to find and remove duplicate items in your iTunes library
http://support.apple.com/kb/HT2905
Sincerely,
Delgadoh

Can I use the second HDD in a Mini for Time Machine?

I am looking to replace one of the HDDs in a Mac Mini with an SSD, this would be for the main OS to work on and all my files, I am not a big advocate of spreading around my files over multiple data silos. I was wondering then, as I don't have a Time Capsule, whether it would be possible to dedicate the second HDD for exclusive use of Time Machine, backing everything up?
I don't have a Mini at the moment and so don't know how OS X treats the existing setup, is the HD treated as one, or are the two clearly separate? It's a mystery to me why there are two in the first place, I summise that it was an attempt by Apple to create the illusion of a fater computer by adding in a small amount of SSD to complement the larger (and cheaper) HDD?
Anyway, would splitting the two work and would it be easily achievable with existing tools in OS X?
Thanks.

Hamper wrote:
I was wondering then, as I don't have a Time Capsule, whether it would be possible to dedicate the second HDD for exclusive use of Time Machine, backing everything up?
Anyway, would splitting the two work and would it be easily achievable with existing tools in OS X?
Yes, you can use the 2nd HDD with Time Machine as your TM back up drive.
As long as you are able to format your new SSD and the HDD, you can use them independently. I would advise using Terminal and the diskutil commands to do this as Mountain Lion 10.8.3's GUI Disk Utility will see the SSD and HDD as needing to be "fixed" (drives marked in RED) and if you choose to FIX the drives your two drives will automatically be setup as a Fusion drive and all data on the drives will be lost.

Re: Satellite P775-11P and upgrade with second HDD

I know that you can have a second HDD in higher models, but ist it possible to add a second HDD to my P775-11P???
Because the place/bay is already there, only the cables are missing....
Please help.....

I agree with Macius
If the connectors are missing, the second HDD is not possible.
The point is that all the notebooks use the same plastic covers but the motherboards might be different and this is the reason why the second bay is available but the 2nd HDD is not possible.

Second HDD/SSD Bay

Does anyone know if HP offers an Optional Second HDD/SSD bay for the Elitebook 2560P? I would like to replace the DVD with a second hard drive.

rotoruda wrote:
Does anyone know if HP offers an Optional Second HDD/SSD bay for the Elitebook 2560P? I would like to replace the DVD with a second hard drive.
Hi,
There are plenty of them on ebay..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Does Satellite Pro C850-1EQ support Sata III?

I've just picked up a new Satellite Pro C850-1EQ laptop, and am looking to replace the slow 5400rpm drive with an SSD.
I can't find the SATA specifications of this machine anywhere - does it support Sata III (6Gb/sec)?
Thanks,
Gareth

Hi
As far as I know it supports the SATA II (3Gb/s)
But you could install some software diagnostic tools like *SiSoft SANDRA*
This would provide all details about the hardware configuration.
Could you confirm that its SATA II?

Hyperlink does not open new window on the second page

Hi,
I have a report which shows list of products. Every product id has hyperlink to show details. When I click on any hyperlink on the first page, it opens in new window and looks good. But the hyperlink from the second page opens in the same window and overwrites main report.
I am not sh=ure what is happening?
Does anybody come across such problem and have the solution?
Thank you.
Julia

Hi Julia,
This is the way to resolve the issue in BO XI 3.1 SP3 :
Open the existing Crystal Report in the Crystal Reports Designer
Edit the formula which was created in the above step and replace sWindow=New with "target=_blank" as follows:
a href="http://<servername>:<port>/OpenDocument/opendoc/openDocument.jsp?sDocName=Drilldown" target="_blank"> MyTest </a>
Save this formula and save the report as well
Log onto the BusinessObjects Server box and modify the web.xml file located in C:\Program Files\Business Objects\Tomcat55\webapps\CrystalReports\WEB-INF by adding the following code in it:
<context-param>
　　　　　　<param-name>
　　　　　　　　　　　　　　　 crystal_encode_html_for_single_line_field_objects
　　　　　　</param-name>
　　　　　<param-value>no</param-value>
</context-param>
5. Save this file
6. Restart the application server (Tomcat)
7. Now, when you open the report in InfoView and click on the hyperlink, the target report should open in a new window.
Regards,
Anchal

Does sim-free iPhone 6 support the 4G of cmcc?

CMCC, China Mobile Communications Corporation is using LTE-TDD as 4G, which most of iPhones does not support. I've heard that the sim-free iPhone 6 might be fit with the 4G of CMCC, is that true? And some of my friends told me that iPhones start with A1586 can support the 4G of CMCC. Does sim-free iPhone 6 has iPhones start with A1586? Thanks!

https://www.apple.com/iphone/LTE/

Does 2011 MacBook Air 11" support the Apple Cinema 30" display?

Does the 2011 MacBook Air 11" support the enternal Apple Cinema 30" display?
Configuration
1.8GHz Dual-Core Intel Core i7
4GB 1333MHz DDR3 SDRAM
256GB Flash Storage
LN

Sql loader does not skip header rows from the second infile

Hi
I am new to Sql Loader and trying to figure out a way to load data into the table from 2 files which have different data in the same format. The files get successfully loaded into the database with just one glitch:
Its skips first 2 rows from the first file however it takes first 2 rows from the 2nd file which I do not want. Can anyone help me with this issue? How can i restrict loader from picking up the 2 header rows from the second file as well?
given below is the content of the control file
OPTIONS ( SKIP=2)
LOAD DATA
INFILE 'C:\loader\contacts\Italy_Wave11_Contacts.csv'
BADFILE 'C:\loader\contacts\Contacts.bad'
DISCARDFILE 'C:\loader\contacts\contacts.dsc'
infile 'C:\loader\contacts\Spain_Wave11_Contacts.csv'
BADFILE 'C:\loader\contacts\Contacts1.bad'
DISCARDFILE 'C:\loader\contacts\contacts1.dsc'
Truncate
into table V_contacts_dump
fields terminated by ',' optionally enclosed by '"'
trailing nullcols
(ASSISTANT_EMAIL_TX,
ASSISTANT_NM,
ASSISTANT_PHONE_TX,
BUSINESS_AREA_CD,
BUSINESS_EMAIL_TX,
BUSINESS_FAX_TX,
BUYER_ROLE_CD,
COMMENTS_TX,
COUNTRY_CD,
COUNTY_STATE_PROVINCE_CD,
DATE_OF_BIRTH_DT,
DO_NOT_CALL_IN,
DO_NOT_EMAIL_IN,
DO_NOT_MAIL_IN,
DOMESTIC_PARTNERS_NM,
FIRST_NM,
FULL_NM,
GENDER_CD,
INTERESTS_CD,
LAST_NM,
MIDDLE_NM,
MOBILE_TX,
OFFICE_PHONE_TX,
OWNER_PARTY_EMAIL,
PREFERRED_CONTACT_LANG_CD,
PREFERRED_CONTACT_CD,
PRIMARY_CONTACT_IN,
REFERRED_BY_TX,
SALUTATION_CD,
STAC_SRC_ID_TX,
STAC_STDS_SRC_ID,
STCN_SRC_ID_TX,
STREET_TX,
STREET2_TX,
STREET3_TX,
SUFFIX_TX,
TITLE_CD,
TOWN_CITY_TX,
ZIP_POSTAL_CD_TX )

It would be possible to call the loader twice with only one input-File at each run.

Satellite P20-552: Will BIOS support the 80GB HDD?

I currently have an 80 GB hard drive in my notebook. I have read that the BIOS will not handle a larger hard drive - is this an absolute or will a BIOS update correct this limitation?

Hi
I have read the same info about the compatible HDD for Sat P20.
According to some Sat P20 owners the notebook supports 30GB/40GB/60GB/80GB
HDDs.
But you know, these are not official inforamtions and I recommend simply testing several sizes.
Maybe an 100GB HDD will be supported

Does Satellite P70-A-129 support the second HDD/SSD

Similar Messages

Maybe you are looking for