Does SBS not host sufficient services to provide 'Enhanced presence Privacy' to users homed on that server?

Hello All,
I have a question around Enhanced Presence Privacy mode. I understand from the Technet documentation that EPP can only be enabled Globally, at the Site Level or at the User Server Service level. Due to the fact that managing client-side
EPP settings is not exposed in the Lync Control Panel or Shell the recommendation for enabling EPP for a subset of users is to have a separate pool for those users.
I’m working with a customer who needs to deploy EPP for a subset of their users but considering that we’re already planning to deploy a centralised enterprise pool of 4 front end servers they are reticent to deploy another enterprise pool
to offer their EPP enabled users resiliency. Given that pool pairing only works with enterprise edition to enterprise edition or standard edition to standard edition I came up with the idea of deploying a Survivable Branch Server for the EPP enabled users
assuming that this new site would provide a target for EPP policies for those users. However, in testing this idea in the lab I’ve found that although I can create a site level policy for the SBS site the users homed on the SBS do not pick up the policy -
EPP does not work and in the Lync client Status settings the same options are offered that would be offered if EPP was not enabled.
Questions:
Is this expected behaviour? I.e. Does an SBS not host sufficient services to provide EPP to users homed on that server, even though it’s technically another site?
What is meant by the documentation when it talks about assigning the policy to the “User Server Service”? I assume there is only 1 of these services per pool?
Thank you in advance.

Hi,
I didn’t find any documents about the SBS limitation to provide EPP mode.
Please try to set a user policy to test if EPP mode works for the branch site users.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Branch Office will not host Microsoft services/servers - Sites and Subnets

Hi,
The scenario is the following:
1 Domain. Windows 2012 R2.
6 sites. 1 DC per site. 3 subnets per site.
5 sitelinks.
The sites diagram is the following:
The branch office "SITE04" will not host any Microsoft service/server/PC. Network routing/flow scheme will not change (branch office SITE04 reamins routing traffic to/from SITE05 and SITE06).
The questions are:
Does the existing SITE04 subnets must be deleted?
Does the existing SITE04 site must be deleted?
Does the existing SITE04-SITE05 and SITE04-SITE06 site links must be deleted?
if yes to any of the above questions?
How to redesign the subnets/sites/site links?
Thanks in advance!

Thanks MrX for your response.
The SITE04 branch office will not host Microsoft-based PCs/Servers/Services. SITE04 will be used for network traffic routing purposes and will host servers from another platform.
Why to mantain SITE04 subnets?
Thanks in advance!
In this case, maintaining the subnets would be optional.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

HT4623 i am an iphone user and i just tried to download theiso6 to my phone and now i can not get no service to my phone. i only can get a message that tells me to connect to itunes too activate but when i try that it says that i have no service.i am a si

i need help with my iphone activation. after installing ios6 i can not use my phone. it says no service i use a sim card from the bahamas please tell me how i can get this problem solved

Has your iPhone been jailbroken or modified to work with
other than the original wireless carrier?

What does "You do not have sufficient access privileges" mean?

Hello Gurus!
I am wondering what does "You do not have sufficient access privileges" mean? I have a G$ with 2 internal hard drives. One has OSX 10.3.9 loaded on it and the other has OSX 10.4.7 loaded on it. When I boot up in 10.4.7 and try to access (open or copy) anything in the the desktop, documents, library, movies, music or pictures folders in my user folder on the 10.3.9 disk, it tells me that "I do not have sufficient access privileges"! This is a single user machine and it automatically logs in as me... the administrator. I tried to look at Apple's technical documents regarding permissions and privileges, but it is very confusing with all of it's terminal commands and lingo. Does anyone know an easy (and hopefully GUI) way around this problem?
Thanks Much,
Mark

If you have a different system on each HD then you do not have a single user machine. The user on one system/boot volume is not the same user as the one on the other, even if they ahve the same name and password. If you boot from the 10.3 volume, you can select your user folder, go to File-Get Info, and change the access for others to read and write and click on the apply to enclosed items button. You should then be able to boot from the other system and move stuff around as you see fit. Of course, this is not a terribly secure state to leave your system in, as anyone who can gain access to your Mac can get at everything on your 10.3 home folder.
If you try this route, I'd suggest doing it only long enough to move everything to one home folder and then revert the access privs to the way they were.

ERROR: You do not have sufficient privileges to complete this installation

When attempting to install iTunes 9.0.1, I receive this message just after the installation begins: You do not have sufficient privileges to complete this installation for all users on this machine. Log on as an administrator and then retry this installation."
I am the administrator of this machine. I have tried installing in a different directory of the all users folder, however that failed with the same reason. This PC has had some anomalies of late so this may not be iTunes, but I'm without clues as to where to go to fix this.
Thanks for any clever ideas you may have. I miss the music.
Gina

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Running Mac 10.5.8 with Firefox 3.0.6, want to update, get message 'I do not have sufficient priviledges to complete...', where do I find offending folder without priviledges?

I have a MacBook Pro running 10.5.8. Firefox 3.0.6 is installed. When I try to update I get a message saying that I do not have sufficient priviledges to complete part of the operation. I take that to mean a folder containing part of the application Firefox is read only rather than read and write. I know how to change that but I've looked at the obvious Firefox folder but don't know where else to look for the offending folder.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Hello!
The cloud logo means that you purchased these songs from the iTunes Store but haven't downloaded them to your computer yet. If you want, click the clouds to download the songs and the cloud logo's will disappear for those songs too.

How come I do not get 4g service at my house?

Hello,
I am just wondering why I do not get 4g service at my house. This has been years long that I have not received 4g coverage at my house and I am able to receive the coverage about 5 miles away (near the mall). My zip code is 11767. What steps do I take to address this issue? I am getting a new phone through Verizon in which I just signed a new 2 year contract and I would like this problem alleviated immediately.
Sincerely,
Robert

I only have the issue with reception in my home. I have 4g service out in the parking out of my apartment. I have 4g service when I'm at school half of the time. The reception is awful in my apartment and I only have 4g service in my bedroom and no other rooms at all.
Candice M. Morson
J.D. Candidate 2015
Charlotte School of Law
Criminal Advocacy Certificate Program
Phi Alpha Delta

SCSFileDownloadServlet fails: User 'guest' does not have sufficient priv.

Hi,
We have an ADF application that is using SCSFileDownloadServlet to get documents from UCM. We added the servlet in web.xml and we are using this link to download the documents: /getfile?adapterName=our_adapter_name&dDocName=document12345&dID=12345
The issue is that sometimes it works but sometimes it fails throwing this message in the logs:
Event generated by user 'guest' at host 'CIS'. Unable to download 'COR-ER-421722'. User 'guest' does not have sufficient privileges. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,guest,CIS!$!csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
intradoc.common.ServiceException: !csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
*ScriptStack GET_FILE
3:checkSecurity,dID=421317,dDocName=COR-ER-421722
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.ServiceSecurityImplementor.validateSecurityPrivilegeLevel(ServiceSecurityImplementor.java:813)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:170)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:121)
at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:371)
at intradoc.server.Service.checkSecurity(Service.java:2829)
at intradoc.server.FileService.checkSecurity(FileService.java:337)
at intradoc.server.Service.checkSecurity(Service.java:2807)
at sun.reflect.GeneratedMethodAccessor456.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Is it possible to set a user/password to this servlet so it is able to download the documents everytime?
Thanks,
Josue

Hi go9189,
According to your description, you come across the error that User 'guest' does not have permission to run DBCC checkprimaryfile. This issue could happen when the login account doesn't have CREATE DATABASE, CREATE ANY DATABASE,
or ALTER ANY DATABASE permission in SQL Server instance, or that the login account has no access to the mdf and ldf files when attaching database, so SQL Server recognize the login account as a "Guest".
To solve the issue, you could pay attention to the points below.
1. Ensure that the login account has at least CREATE DATABASE, CREATE ANY DATABASE, or ALTER ANY DATABASE permission. You could grant the fixed server role 'dbcreator' or 'sysadmin' to the login account following the steps below.
a. Connect to SQL Server instance with the login account which has sysadmin fix server role.
b. Expand the folder 'Security', right click the login, and select Properties.
c. In the Server Roles tab, check the checkbox for 'dbcreator' or 'sysadmin'.
2. Make sure that the the login account has full control permission on the mdf and ldf files. For how to grant the login account with full control permission on the mdf and ldf files, please refer to the steps in the following article:
http://msdn.microsoft.com/en-us/library/bb727008.aspx
There is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/e463df4c-8d26-46cf-aa2e-bddd97c7a9b8/user-guest-does-not-have-permission-to-run-dbcc-checkprimaryfile?forum=sqlgetstarted
Regards,
Michelle Li

HT5654 I often travel abroad and my host has changed Internet provider. Then my service was interrupted and I can't update iTunes. Any tips to stop the error messages?

I often travel abroad and my host has changed Internet provider. Then my service was interrupted and I can't update iTunes. Any tips to stop the error messages?

Wow! At least on Apple TV, problem solved. Apple: what's not to love? Please give me credit if you use it in marketing campaigns... ;-)

Why would I not have sufficient privleges on my own computer to start Apple Mobile Device Service?, why would I not have sufficient privleges on my own computer to start Apple Mobile Device Service?

I performed the most recent update of iTunes, but it did not install properly. I uninstalled iTunes, then reinstalled, but now I am getting an error that states: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privleges to start system privleges." I am the owner of this computer and do not understand why I would not have sufficient privleges to start a service on my computer. Any help would be very much appreciated!
Mike

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

The '' secondary data source is not a relational data source, or does not use an OLE DB provider.

Hi,
We are using Teradata as data source in SSAS 2008R2, it’s using ‘.Net Providers\.Net Data Provider for Teradata’.
In DSV, we have two data sources both using Teradata. While processing dimensions, all dimensions coming from secondary data source has error message”
The '' secondary data source is not a relational data source, or does not use an OLE DB provider.”
But we are not using OLE DB provider for now, we’ve searched some threads that named queries can be replaced for secondary ds, but since we have a lot of tables, it’s hard to implement using named queries.
Any inputs would be appreciated.

Hi memostone,
When defining a data source view that contains tables, views, or columns from multiple data sources, the first data source from which you add objects to the data source view is designated as the primary data source (you cannot change the primary data
source after it is defined). After defining a data source view based on objects from a single data source, you can then add objects from other data sources.
If an OLAP processing or a data mining query requires data from multiple data sources in a single query, the primary data source must support remote queries using
OpenRowset. Typically, this will be a SQL Server data source.
Here are the restrictions:
The primary data source should be SQL Server and support OpenRowset to the secondary data source.
Or you design the cube in such a way that rocessing for each object only needs to access data from a single data source
I recommand you refer to the following article:
Defining a Data Source View (Analysis Services):
http://technet.microsoft.com/en-us/library/ms174600.aspx
Regards,
Bin Long
TechNet Community Support

Enable Audit on SCOM Agent An exception was thrown while processing Submit Tasks does not have sufficient permission to perform the operation.

Hi All,
An exception was thrown while processing Submit Tasks Domain\"SDK Account" does not have sufficient permission to perform the operation.
am getting this error when try to enable audit in one of Domain controllers.

Dear Mark,
i face similar problem before, i had resolve it be adding SDK service account to Operation Manager Administration group.
Regards, Ibrahim Hamdy

ADS does not work.(Service call exception)

Hi All,
According to SAP note 937697 "Usage of SAP NetWeaver BI Diagnostics & Support Desk Tools", when running the tool, it gives following error:
ADS does not work.(Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://sapbwd.ni.ad.newsint:50000/AdobeDocumentServices/Config?style=document")
I have been looking into system to find out how to solve the issue, but could not, is there anyone who can help me with exact instructions what I do need to do.
Thanks in advance
sahmad

Dear Sahmad,
I would suggest you to check notes 1004321 and 944221. The first one says that mostly of this kind of issues (and I have already seen several ones) is caused for bad passwords for user ADSUSER or this account expired. The second note is a troubleshoot note you can also do.
You can also follow this procedure to check that:
Please open the Visual Administrator and browse to Server -> Services -> Security Provider -> Policy Configurations
In the Components tab you will see the service.destinations policy. Click on this and then click on the AccessDestinations security Role. Modify this and add the J2EE_ADMIN/Administrator user to this role and save.
Maybe the password is not set correctly as well. I think it worths to be set it again. First you have to identify where your ADSUSER maintained.
Go to http(s)://<SERVER>:<PORT>/useradmin search for ADSUSER If Datasource:
- LDAP -> check psw of ADSUSER in LDAP and enter it in SM59
- UME data -> check psw of ADSUSER in Visual Admin and enter it in SM59
- ABAP -> check psw of ADSUSER the ABAP system in the following client:
Visual Admin->UME Provider->Properties->ume.r3.connection.master.client
If you want, also, you can change the ADS by the SAP Export Library, as per SAP Note 1112132. It is very simple to activate and will bypass ADS, doing every function ADS does.
I hope it helps.
Kind Regards,
Marcio

Does SBS not host sufficient services to provide 'Enhanced presence Privacy' to users homed on that server?

Similar Messages

Maybe you are looking for