Does SES11g support ACL security model in ECM11g

hi Experts:
Does SES11g support ACL security model in ECM11g?
All information I got is negative, but need some comfirmation, sometimes documentation is not accurate.
If the answer is yes, could you give me a doc url I can reference?
Best regards

Hi
I think that you can have the ACL security enabled on SES searching as well . When creating the source on SES there is a option which mentions if the source's ACL security is to be used or not .
So if that option is selected then I believe the same can be used on ses searching as well .
Try it and let me know how it works .
Thanks
Srinath

Similar Messages

Need a hint for home office / 871 does not support port-security - FPM ?

Hi,
i want to realize the following setup:
- Central Site 871 with Internet Connection and static IP
- Home office 871 with Internet Connection and static IP. On that home office router, there should be 2 Vlans: 1 for the office work and one for the user's private PC. All Traffic from the "office" Vlan is being put into a VPN to the central site. All Traffic on the other interface is being natted and goes straight to the internet.
To minimize security issues, i tried to configure port-security, so that the user cannot connect with his private PC to the office LAN ports and vice versa. Unfortunately, port-security seems not to be supported on the 871 (advanced ip services image).
Now i looked for an alternative...and came over to FPM (flexible packet matching).
If i understood right, you can classify packets for example by their source MAC address and if this field matches a specific value (the mac of the work pc), packets can be dropped by a policy.
Of course i cannot avoid that the user connects the work pc together with his private pc (this is then related to the OS Security to keep out viruses, worms, trojans, etc). But i could/want to restrict the internet access with the work pc through "normal" Internet access - the users should not be able to do that (must use the company's proxy).
I did the follwing config:
class-map type access-control match-any c2
match start l2-start offset 48 size 6 regex "0xabcd1234fedc"
match field ETHER source-mac regex "abcd1234fedc"
policy-map type access-control p2
class c2
drop
interface Vlan1
ip address 192.168.20.1 255.255.255.0
ip nat inside
ip virtual-reassembly
service-policy type access-control input p2
service-policy type access-control output p2
As this feature is quite new, i'm not familiar with it's syntax.
I also tried to use "string" instead of regexp, but i'm still able to connect the office pc to the private Lan and i am able to access the "Internet" (currently it's only setup in a lab).
As i understood so far, the offset is the value in bits, and size is in bytes. is that correct?
Has anyone yet some experience with FPM or maybe any hint for me how to realize the requested setup with the 871 routers?
bets regards,
Andy

For the FPM feature to work you will need PHDF files for the protocols you want to scan for to be loaded on your routers. The files can be downloaded from cisco's website. In your case you will have to download ether.phdf file.

CSM - does it support ACLs on a Cisco Catalyst 6500

Hi,
Does anyone know if CSM Enterprise Standard can be used to manage ACLs (standard and extended) on a Catalyst 6500?
Regards,
Piaras

Hi,
Just insert the blade and the switch should recognize it. For the 6500 series the blades are hot swap able.
HTH

Does iCloud support sharing secure notes?

I use secure notes on my Mac to store sensitive data like CC#, SSN, etc. Is there a method to share these notes with my iOS devices?
Thanks

I believe it only supports syncing with other Macs, not iOS devices. There are, of course, other apps that will accomplish this, such as 1 Password. Or, you could create password-protected documents using MS Word and upload them to a Dropbox account, then open and view them on your devices using the free Dropbox app.

Does CS6 support the old model of Wacom Bamboo Fun?

So I have an ancient Wacom Bamboo Fun tablet, model CTE-650. I recently received and installed the Adobe CS6 package (the student version... if that makes any difference) to further my graphic design dream. Long story short, I can't seem to make the pressure sensitivity work in Illustrator or Photoshop. In Illustrator, I've fiddled with different Calligraphy, Bristle and 6D brushes with different settings, and still, no luck. I can see the option on the dropdown menu, but for some reason, the CS6 programs aren't sensing the pressure sensitivity capability of my tablet.
I also have Photoshop Elements 8, and the pressure sensitivity works just fine there.
Could the problem be that my new "toys" are so new that they are no longer compatible with my 5+ year old tablet, and if so, is there a fix for it? I hope that isn't the case, because I'm still quite fond of my (first-ever) tablet, which is still going strong even with daily use.

So this is the one you have installed?
Driver and Software Installation Tool for Bamboo (PC)
28 Oct 2011
Notes
Download

Does Discoverer support Column Security

I'm developing some Reports from payroll Data, Obviously the data is Xtremely Sensitive, Is there any way I can restrict certain Column Information from Certain Users in the same Report/Worksheet.

well the abstaction is supported in tha admin edition and there u double click on the column for which the properties open up. then there one parameter hide from user or sth of that sort is there fill that as yes then that particular column will not be visible to the user (version)
cheers.,
sampath

Increased Object Type support within Data Modeler

Hi,
This is a question mainly for the Data Modeler Development Team as well as the Tools group. First of all, the production version of Data Modeler 3.0 is very nice and the improvements in the DataTypes area over what was in EA1 are great. Thanks for adding the Domain support to the definition of Attributes and Parameters for Methods, that makes life much simpler and opens the door for a much wider range of object type modeling and ease of implementations since consistency can now be maintained much easier via Domains. Also the support for straightening of lines is awesome. This is the best implementation I have seen, even better that what we had in the Design Editor in Oracle Designer, kudos again to the team that built the diagrammer interfaces.
My question is, Going forward will Data Modeler continued to be enhanced to finally fully support Oracle Objects and the object relational (OR) model? I ask this because as users of Oracle's RDBMS, we do not have a tool that allows us to fully model and implement the features provided by the Server Group in the area of Object-Relational features and functionality. Oracle Designer had some OR modeling capability, but the end of life on product stopped all further development. One of the common excuses is there is no market demand for object - relational modeling. I would argue, that the lack of market demand for object - relational applications is because we have never have had a tool that fully supports Oracle's object - relational model. Nor do have we had a development tool that allows us to implement a fully developed Oracle Object - Relational model. The tools group stopped the development of Oracle Forms support for nested objects and collections. The LOV functionality for REF columns is pretty awesome, but we can't get to nested collections much less a nested collection of REFs.
So as a member of the end user community, we are stuck in this Catch 22. The Server Group continues to support and enhance the Object - Relational model, but the Tools and Modeling Groups haven't kept up with the tools to model or implement the functionality and features supported by the database. As a result we have a partially built set of tools that allows us to scratch the surface of the Object - Relational model but are not able to take full advantage of the powerful features of inheritance, inherited and extended collections, the ability to inherit and then extend methods, etc...
The Object - Relational model was introduced with Oracle8, 10g solved the type evolution problem which made production implementation of object types realistic. My question is; Is Data Modeler finally going to fully support Oracle's object - relational model? If we as the end user community finally get a tool that does fully support the OR model, we'll finally be able to model, build and deploy applications that will in turn create that market demand which is lacking for the object relational model.
Thanks in advance,
ScottK

Phil,
Yes, having the ability to include an attribute from an data type as part of the PK, UK and or index will be very, very nice. Doing that opens a number of doors on the design, modeling and implementation sides. It would allow us to model and then create a data type which has all the common attributes for housekeeping information within each entity -> table. This is something we tried to do with Designer but was pretty involved script wise. By being able to create specialized housekeeping datatypes and then using the 'add attribute' with the scripts provided with DM 3.0, it simplifies the model after the fact. Think about it, we'll be able to have a datatype with all the attributes for created on/by and modified on/by along will all the methods to populate those attributes (formerly columns), then we can include that datatype into the entity as an attribute called say, 'row_audit' with the datatype of 'common_'. Now in one pass we have the place to hold the information of who created and modified the row as well as the date and time along with all the code required to populate and maintain that information. Everything modeled, defined and written in one place. No more have to include or write the pl/sql across several different modules, rather the calls to the method, a constructor, are within the insert or update statements for that table. If we take that train of thought and extend it to include the housekeeping functions for relational primary keys, then we can create one datatype with the attribute and methods to create a single column primary key. Once that is pulled into an entity, defined as the part of the unique identifier and then pushed down as a primary key and resulting foreign keys. We have all the code to enforce and populate primary and foreign keys wrapped up in one datatype with its supporting method as a constructor. Think of the other possibilities that would be available once we can include nested attributes w/i keys and indexes. It makes some models and designs much simpler, more maintainable, more scalable (less code to execute), etc...
I have been thinking about this. I see ya'll have provided the options for IN, OUT, IN/OUT, COPY and NOCOPY as modifiers for the parameters on methods. We also have the option for COPY / NOCOPY in the constructor method for type. Will that be included?
Lastly, since the Server Group solved the type evolution problem, that coupled with the ability to include a datatype as a definition for column really opens the design doors. For example, by using a datatype of 'common_', as mentioned above, if the system requirement appears after the system is built for a the name of the source system to be included with the 'row_audit' information, we can modify the datatype 'common_' to include these new attributes and methods and then the ALTER TYPE syntax provided by the Server and Language groups to effectively extend all the tables to include this new system requirement. Till the Server group solved the type evolution problem, this wasn't possible and we had to write several 'alter table add column' scripts. This is all replaced with the ALTER TYPE... cascade data command now. Once DM 3.0 includes the ability to reference embedded attributes, design and modeling life will be great.
Thanks in advance,
ScottK

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

JavaBean - Netscape security model is no longer supported.

Netscape security model is no longer supported.
Please migrate to the Java 2 security model instead.
Is logged to my java console window and the javabean will not be invoked. How do I migrate to the Java 2 security model. I'm tryÃng to use acrobat viewer for Java as a bean in my forms to open and print pdf documents.
Thanks,
Anders

Anders,
see also my response to your second posting on this:
VBean
My last information regarding the Acrobat Reader jar files were that they are based on Java 1.x, wchih may explain the problems you are running into. I tried these jar files one or two years ago and had problems getting them to work in a newer Java environment.
Frank

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

Does the Built-in Windows FTP Client Support a Secure Connection?

I have set up Server 2008 IIS w/ FTP. I set the SSL setting to require a secure connection. However, I can't connect to the FTP server from the built-in Windows FTP client. I CAN get it to work in FileZilla after modifying my connection properties.
Does the built-in Windows FTP client support secure connections? I received a request to set this up so our internal employees can share files with external customers. Many times our customers are unable to install any kind of third party software on their
computers.
Thanks in advance for the help.

Hi,
Based on my known, the built-in FTP client does not support secure connections.
Similar thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9500d7c2-cf18-4ab1-a0cb-1e277deab33c/is-it-possible-to-connect-to-iis-75-sslrequired-ftp-site-via-windows-explorer-or-ie-?forum=winserverNIS
If it does not help, you could ask in IIS forums as Meinolf Weber mentioned.
Hope this helps.
Regards.
Vivian Wang

Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
The only way I have found is to sell membership to a secure area where the files are linked.
When I create the secure zone, I want a one-time-fee, but the system says:
"ERROR: The payment gateway that you are using does not support recurring payments"
The payment isn't recurring!
Micah

"Note that you have to use seamless gateway to process such payments."
Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error. Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
Micah

J2sdk1.4.2_12 does not support the 64 bit data model

Hi guys,
I need support for instalation NW2004R1 for windows x64bit.
in the step "define parameters" I need set JDK Directory, I setting C:\j2sdk1.4.2_12 and when click in botton next, I receive the message " The JDK installed in directory C:\j2sdk1.4.2_12 does not support the 64 bit data model. Choose a different JDK. "
I search documents but not found.
Anybody can help-me ???
thanks
Henrique Mattos.

Hi,
You can get more information related to your issue from
service.sap.com
https://sdlc2e.sun.com/ECom/EComActionServlet;jsessionid=606D9ABC1A37F8F6D7517A9B77ACA38B
Regards
Agasthuri Doss

Using Outlook for Mac; emails and calendar announcements will not send--error message: "the server does not support secure connections" Help?

Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?

I have done a similar set of things and no results.
This is really odd, Mac Mail works other emasil clients work, just not Outlook.
The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time. I ended up having to reset mine.
Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here?

Levovo Security solution FP does not support Firefox 5

lenovo security solution fp (password bank) does not support firefox 5. I found an addon that made by UPEK http://www.upek.com/support/customersupport/techsupport/Topic.asp?ID_Topic=82
but it is for protector suite 2011 (which lenovo did not upgrade). Is there a solution for that. My real intense is with fingerprint, i want to be filled password areas in web sites.
Regards

I have Firefox 5.0.1 and the coupon printer I'm trying to use is supported by ActiveX. It appears that 5.0.1 is not compatible with ActiveX. Can you tell me how I can access this installation to print my coupons with Firefox, please? Thanks!

Does SES11g support ACL security model in ECM11g

Similar Messages

Maybe you are looking for