Does setting the PLOGI PRELU switch to BTCI trigger batch job

Hello HR Experts,
When I set the PLOGI PRELU switch to BTCI do I have to schedule the batch job to run daily or will it run automatically by just setting the BTCI switch?
Thanks.

Hi, 
You have to create a job and assign the RHINTE report. It has to be done once manually and job will take care every other time.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

Similar Messages

Although I set the on/off switch to ON with "change with buttons," the alerts will not change individually. Any suggestions?

I'm having issues with the alerts volume control.
Although I set the on/off switch in settings to ON with "change with buttons", the alerts volume will not change individually. Any suggestions?

I don't mean to be rude or anything but did you check to see if it's on hold? I had the same problem, I nearly worked myself to tears trying to figure out why it wouldn't turn off! hope you fix you're problem.
P.S.-Maybe you should just let the batery run out till it goes dead, hey, then it will be off right?

How do I set the buttons on my website to trigger an iFrame when I hover over them?

How do I set the buttons on my website to trigger an iFrame when I hover over them? At the moment they work when I click on them.
I have tried everything to try and get them to work when I hover over them.
If anybody could point me in the right direction or give me any help it would be greatly appreciated.
imbriggy

I think this would pose a major usability issue for touch screen devices that have no mouse and thus don't respond to mouseover/hover. In that sense, OnClick is much more reliable. But to answer your question, you would need to invoke the event with JavaScript.
Nancy O.

Does setting the screen brightness to the MAX shorten the life of the LCD?

On daytime I set it to about 80%. That's bright enough.
Also, another thing I noticed was I tried to cover the speakers with my hands. The keyboard lit up a little bit but the screen dimmed down. Is it normal?

While setting the brightness to maximum doesn't shorten the LCD's actual lifespan it does however, I believe, speed up the degradation on how bright your screen will be.
As for when you cover the speakers… yes, this is normal. What's happening is that the ambient light sensors (which are under the grilles, are picking up a reduction is ambient light and in doing so is setting the screen brightness down and activating the backlit keyboard.

What does setting the internet zone security level to high actually do?

I was asked to set the Internet zone security level to high via a GPO, this has been done for a test group of users. The setting has been confirmed, but as far as I can see it has not actually done anything.
Can anyone tell me what changes I should see to the behavior and/or access of websites now the security level is set to high?

Hi,
Setting the internet zone security level to high might prevent harmful content with maximum safeguards and less secure features are disabled.
When you visit some sites with script pop up, the script will be disabled if you set the security level to the high level. For more information about
the internet zone security level, please refer to this:
http://blogs.technet.com/b/steriley/archive/2008/09/16/internet-explorer-security-levels-compared.aspx
Regards.

Want to set the 16 DIP switches to use the Instrument simulator in RS232

Can't find the meaning of the 16 DIP switches in the NI Instrument Simulator documentation for use in RS232.

The switch settings are in the latest version of the manual. You can download it from here.

Is it possible to retry the err mess in Adapter engine thru Batch job

Hi Experts,
Is it possible to restart the errored messages in the adapter engine thru a batch job as we have for the Integration server, apart from setting the maximum number of retries and the intervals in the J2EE visual cmposer..?..
In case the receiver R/3 system is down, for long time is it possible to retry the error message in the Adapter Engine?. Also clarify me in case the R/3 system is down will the errored message be available in SXMB_MONI itself ?..
Thanks for your replies in advance.
Regards,
Rajesh

Rajesh,
I don't think you can create a batch job for this. The standard option is retry limit as you have specified.
>>in case the R/3 system is down will the errored message be available in SXMB_MONI itself ?..
It depends, based on the communication mode.
If Server proxy, yes error in SXMB_MONI.
If RFC, no error in SXMB_MONI. Error in Communication channel Monitoring.
Not sure about IDOCs.
Regards,
JaiShankar

HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

Does anybody no how to switch off automatic updates on the iphone 5.

Does anybody no how to switch off automatic updates on the iphone 5 many thanks was1521 UK.

The reason i asked about automatic updates was because my provider 02 told me about it they said turn it off or get something called a Bolt-on which would provide me with so much internet data at a set price so thanks for your reply Kilted Tim.

I like to watch tvcatchup or sky go or I player on my iPad while falling asleep, the problem is that the iPad then stays on all night. I would like to find an app that allows me to set a timer for the iPad to switch itself off automatically.

I like to watch tvcatchup or sky go or I player on my iPad while falling asleep, the problem is that the iPad then stays on all night. I would like to find an app that allows me to set a timer for the iPad to switch itself off automatically, like the sleeper function on a TV.
Does such an app exist? Can anyone help me? Thanks

You can try the Sleep Timer.
https://itunes.apple.com/sg/app/music-sleep-timer/id320583424?mt=8

How to set the time on a switch

Hi
Does anyone know how to set the date and time on a switch?
Thanks
Dan

Dan,
Use the 'clock set ...' command.
Paresh

HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

How can I switch off the automatic window size and set the size of the window manually

I need to open the web-page in a window of a certain size. The javascript function window.resizeTo (w, h) does not work. If I open the window using the window.open ("", "", "width: w, height: h, ..."), there is another problem.
The hyperlinks that have to be opened in a new tab in the same window or at least in the window of the same size, will open in another tab of the first window from which I called window.open().
I do not know what it is, bug or as intended, but the normal full-featured window with the right size I cannot get.
In Russian:
Мне нужно открыть страницу в окне определенных размеров.
Из консоли Firebug с помощью javascript пробовал window.resizeTo(w,h) - не работает. Если открывать окно с помощью window.open("", "", "width:w, height:h, ..."), то возникает другая проблема: ссылки, которые должны окрываться в новой вкладке в том же окне или хотя бы в окне того же размера, открываются в другой вкладке первого окна, из которого я выполнял команду window.open(), которое неправильного размера.
Не знаю, что это. Баг или так задумано. Но открыть нормальное полноценное окно с нужными размерами не получается никак.

You need an extension if you want to set the window dimensions to a specific value or you need to open a pop-up window with window.open and specify the width and height. 
Otherwise a new window opens with some default dimensions as saved in localstore.rdf and you can't easily adjust the dimensions via JavaScript in that case.

How does one set the DPI when resizing images in Bridge?

I am sure I am missing something here (so excuse me if its a simple answer) but I am used to using Photo Mechanic and there you are able to set lots of variables while resizing. I don't understand this Bridge resizing window when using Batch Processing thru Photoshop.
-There are two boxes for sizing. If you put the same dimension in both does it just set the longest dimension to that size?
-What if I want say a 10x10 inch image at 72 DPI for web use as opposed to a 10 x10 inch image at 300 DPI for printing purposes, where does one enter that info?
Thanks,
Joshua

You don't "resize" anything in Bridge, nor does it set PPI, pixels per inch—and most certainly NOT "DPI" (Dots [of ink] Per Inch) which is exclusively a feature of the printer.
Bridge is just a File Browser. It used to be called simply the Photoshop File Browser". It doesn't open, edit, manipulate resize or even save anything.
It merely hands the file(s) over to the appropriate application, whether that be Photoshop, adobe Camera Raw, Illustrator, InDesign or even MS Word.
You wrote:
-What if I want say a 10x10 inch image at 72 DPI for web use as opposed to a 10 x10 inch image at 300 DPI for printing purposes, where does one enter that info?
Again, you mean PPI in both instances there.
You enter that in whatever application you're sending the image from Bridge.
For instance in Photoshop:

Does setting the PLOGI PRELU switch to BTCI trigger batch job

Similar Messages

Maybe you are looking for