Does Siebel Management Server supports multiple gtwy servers/siebelservers?

Hello,
Does Siebel Management Server supports multiple gtwy servers and siebel servers when running getservers.pl ?
Does Siebel Management Agent service run under windows 2008 OS?
Cheers
Kota

Hi,
In addition to making sure Agent Proxy on all AD FS servers is enabled, please also verify that the IIS 6 Management Compatibility and
IIS 6 Metabase Compatibility role services are installed. (Some AD FS 2.0 scripts depend on Internet Information Services (IIS) Windows Management Instrumentation (WMI) objects being installed.)
Here are two links for your reference:
Discovery Does Not Work in ADFS 2012 R2 MP
http://blogs.technet.com/b/omx/archive/2014/05/07/discovery-does-not-work-in-adfs-2012-r2-mp.aspx
http://scug.be/christopher/2012/03/07/opsmgr-scom-adfs-2-0-mp-discovery-issue/
Regards,
Yan Li
Regards, Yan Li

Similar Messages

Does access manager only support uid as rdn?

I am deploying 2005q4 access manager and my directory does not use uid as the rdn for user entries. Does access manager only support uid as the rdn in user entries? I am trying to test JES with mail and calendar etc and trying to figure out how to use my data design.

no, it can support any attribute for the naming attribute. For LDAP authentication there are usually two directories involved: the LDAP server where authentication occurs and the LDAP server where user profiles are stored.
If you only need to authenticate against an LDAP server where the RDN is not uid (for AD is samaccountname), you simply need to change the naming attribute in the LDAP authentication module
if you the LDAP server where user profiles is stored does not use UID, you may have a little more work on your hands. If you are using AM 7 in realm mode you simply need to create a new LDAPv3 user store configured for your needs. If you are using AM 7 in legacy mode or < AM 7 you will need to modify the DAI service and quite possibly the amUser and amConsole services.

How does create a server with multiple Clients ?

Any people can lead me .
How does create a server with multiple Clients ?
Thanks

For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
I posted a Simple Socket Server that uses 1+2*clients threads.

Does solaris dhcp server support user class

Does solaris dhcp server support user class(option 77). In my environment, solaris dhcp server seems just ignore this option set in the client dhcp discover.
Does anybody can help me.

The clients are all Windows 7 x64 (but I've replicated the problem on MacOS and Solaris clients). The server is Solaris 11 x86.
For the problem to be the ARP cache, wouldn't the client's MAC address have to change during the reboot (i.e. the change in the client's MAC address is what causes the ARP cache to get confused, and hence the client gets blocked because of the MAC mismatch)?
Edited by: user13534003 on May 9, 2012 1:43 AM
Edited by: user13534003 on May 9, 2012 1:46 AM

Does Siebel 8.1 Supports Hijri or Arabic Calender ?

Dear Sir,
Does Siebel 8.1 Supports HIjri or Arabic Calender ?
I have Insurance application in my company.I have Account screen,in this account screen one field has created called Date so for this date Field I want Arabic Calender.Does It possible in Siebel 8.1.If it is possible in siebel 8.1 then please give me the details.
please reply me soon.I am waiting for your Reply.
Thankx & Regards
Ahmed.
Edited by: 857690 on Jan 15, 2012 1:27 AM

Sorry, the question is
Does Weblogic 8.1 supports "referral"?

Does the Messages server support transports?

Just curious, but does the built in Messages (Jabber) server support Jabber transports? These are the gateways that allow a Jabber account to act as a proxy for Windows Live Messenger, ICQ and other protocols.
The reason I ask is that I'm currently using OpenFire to run an MSN gateway, as it allows me to effectively use Messages as an MSN/Live Messenger client. While there's nothing wrong with OpenFire, I'm concidering using OS X server for managing a set of machines and I figure it's better to avoid installing anything OS X Server might already povide

http://forum.java.sun.com/thread.jsp?forum=4&thread=396128&tstart=0&trange=15
the same problem,
could someone help us ?

Does Intelligent Management Center Support UPS's?

My IT department is getting Intelligent Management Center to replace some monitoring in SolarWinds. I want to know if Intelligent Management Center supports UPS's and what brands?

[email protected] wrote:Hello everyone! I am curious what everyone does in their standard client accessswitch closet, do you have UPS's in every closet or do you have nice surge suppressors to protect your client access switches? Sent from Cisco Technical Support iPad App
How big is your network, and how much money do you have to spend?
I've most recently been working on data-center sized networks, and they tend to be covered by large, center-wide UPS's with generator backup - the UPS and associated rectifiers isolate the protected kit from any chance of surges, so they're not needed on a rack-by-rack basis.
That's not a viable option for a smaller network or client base, so you sometimes need to think outside the box - one place I'm working on has two racks, one large UPS in the bottom of one rack and a PDU for each rack running the essential hardware (switches, servers, not monitors or non essential stuff) running off the one UPS.
There's no one size fits all solution - if you have widely distributed network closets/racks and don't want to put a UPS in each rack, your best bet might be getting switches with redundant power supplies and ensuring each supply runs off a separate electrical phase - since a lot of power outages only affect one phase at a time, you can often survive brief otuages on the secondary supply until the primary is restored.
Cheers

Does the IPhone 3G support multiple phone lines?

Looking into purchasing the iphone 3G - does the 3G support multiple Phone lines or numbers? Such as a business and personal number?

You should probably call and ask AT&T, as that would be something that would need to be configured on their end.

Does CISCO C3560X VLAN support multiple Network segments which are further configured with HSRP function

Hi Cisco experts,
My name is Kumagai and I need your expert opinions below.
I am trying to configure one VLAN1 support multiple network segments as below.
(this should be a very straight forward configuration and should be OK, I think ? )
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
The only issue that is eating me is the above network segments are using HSRP too
and I am not sure is this possible with a combination of VLAN1 supporting multiples which are
further supported with HSRP settings in Cisco environment.
!example of HSRP:
interface Vlan4
ip address 172.30.4.253 255.255.255.0
no ip redirects
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
<<< what will happen if I add the HSRP configuration as below into the above VLAN1 with multiple Network segment ??)
I would like to summarize my "Combined" configurations as below but I need your expert opinions on
whether the configuration below is workable without any problem ??
Or it is a total flop because Cisco does not support the configuration below !!!
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
standby 30 ip 172.30.31.254
standby 30 priority 105
standby 30 preempt
standby 60 ip 172.30.61.254
standby 60 priority 105
standby 60 preempt
standby 70 ip 172.30.71.254
standby 70 priority 105
standby 70 preempt
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
Thanking you in advance !!!!!

Hi,
As far as i know we dont set the ip helper address on the radio interface. It should be on the L3 interface of corresposding VLANs i.e.
int vlan 20
ip helper-address 192.168.33.xxx
int vlan 60
ip helper-address 130.20.1.xxx
I'm assuming that your using SVI's (int Vlan 20 and int Vlan 60) rahter than physical interfaces. Also hope you have configured switch port as trunk where this AP is connected.
Modify the AP config as below since you are using data vlan as the native vlan
interface Dot11Radio0.20
encapsulation dot1Q 20 native
interface FastEthernet0.20
encapsulation dot1Q 20 native
Ideally your AP fastethernet configuration should looks like below and not sure how you missed this as this comes by default when you have multiple vlans for multiple ssids.
interface FastEthernet0.20
encapsulation dot1Q 20 native
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.60
encapsulation dot1Q 60
no ip route-cache
bridge-group 60
no bridge-group 60 source-learning
bridge-group 60 spanning-disabled
Hope this helps.
Regards
Najaf

[SOLVED]Looking for a tiling manager which supports multiple monitors

I use musca and I absolutely have no problems with it other than this :
http://bbs.archlinux.org/viewtopic.php? … 04#p774104
I also tried emailing the musca distribution list but it bounced, so I am not sure how actively it is being maintained.
So I am on the lookout for a new tiling window manager. I know Xmonad supports multiple monitors, but I do not know haskell and I was hoping to find something else as well. Xmonad is also not a manual tiler.
So let me know if anyone of you knows of a tiler that has the above support.
EDIT : I have already looked at the Comparison of Tiling Window Managers over at the wiki. Infact I was the one who added Musca's entry in that table.
Last edited by Inxsible (2010-07-13 05:49:13)

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

Does Sun Messaging Server support Microsoft Active Directory

Hello,
I just got this qustion. Does Sun Messaging Server work with Microsoft Active Directory?
Thanks.

Please post in the messaging server forum: [http://forums.sun.com/forum.jspa?forumID=708|http://forums.sun.com/forum.jspa?forumID=708]

Does the weblogic server supports c++ corba client /IIOP?

hi:)
I have a c++ corba client interacts with WLS using IIOP. I am just wondering
what ORB i need to use 2) trsaction propagation 3 ) security
thankx,
suresh reddy

I suggest trying the RMI IIOP newsgroup. I do not quite understand your
question.
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Sunesh Kumra" <[email protected]> wrote in message
news:[email protected]...
Hi Michael,
Is it allowed to use your own multi-threaded library from within WLS ?Note that
the WLS Beans do not contain the threads, the threading part is in somelibrary
which the WLS Beans communicates with. Can the Helper classes which arepackaged
with the WLS Beans span threads of their own ?
Most importantly, is it allowed to use some vendor's ORB (for exampleOrbixweb)
within WLS because the thread created by the ORB might interfere with WLS
threads ??
Michael Girdley wrote:
2.1) CORBA client initiated transactions will not be supported,
everything else will workYes, that is my understanding.
2.2) None of the EJB security services will be available in EJB
method
called by a CORBA client (i.e. getCallerPrincipal() andisCallerInRole()
will fail)Yes, that is my understanding. I would suggest that you place this onthe
RMI IIOP newsgroup. The developers who write the code for this feature
actually hang out over there.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"<=one way=>" <[email protected]> wrote in message
news:[email protected]...
1) We must support both C++ and Java clients that will be requesting
services from our EJBs running in WLS. The clients are internal appsrunning
in different companies and we would prefer to avoid requiring our
clients
to
use an ORB by a specific vendor. At the same time we do not want to
deal
with potential problems related to the implementation differences by
different ORB vendors. What would be the best way to handle thissituation?
2) WLS documentation has the following paragraph:
"WebLogic RMI over IIOP is the framework for EJB-to-CORBA mapping
support.
Currently, however, a standard for passing user identity -- requiredto
implement EJB-to-CORBA mapping -- does not exist and the requirementfor
transaction propagation from the client is in question. While RMI overIIOP
does allow CORBA clients to access EJBeans, the following services
will
not
be available:
EJB transaction services
EJB security services"
Does this mean that:
2.1) CORBA client initiated transactions will not be supported,
everything else will work
2.2) None of the EJB security services will be available in EJB
method
called by a CORBA client (i.e. getCallerPrincipal() andisCallerInRole()
will fail)
Thanks in advance
"Michael Girdley" <[email protected]> wrote in message
news:[email protected]...
Yes, check out the documentation on the RMI over IIOP on our web
site.
>>>>
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"indham inc" <[email protected]> wrote in message
news:[email protected]...
hi:)
I have a c++ corba client interacts with WLS using IIOP. I am justwondering
what ORB i need to use 2) trsaction propagation 3 ) security
thankx,
suresh reddy

Does Netscape Enterprise Server support Java Web Start?

Hi,
I working on this problem too. Could you send me about
your project's details ? (spec and config)
My email: [email protected]
Thank you.I've come to the conclusion that Java Web Start does not support hosting applications on password protected servers. It plain does not not work.
If anyone can get it to work, please let me know.
For me the JWS version based servlet is not a hosting option. I'm stuck with a dumb old IIS server. The only reason I'd want to use the version based servlet hosting is to work around the update bugs.
See my other recent postings.
I've posted a bug-report on the bugparade, but it will take three months before I should expect a reply.
At that point, they may dismiss the bug-reports as "intended features", in which case I do wish there was more options to "turn off" "features" in the JNLP file. ;-)
For now I've been my client has accepted "security by obscurity" for the beta version of the program I'm working on, i.e. I've put the program in a "secret" place and turned off password protection.
�yvind

Does iPlanet Portal Server support ipsec (IP Security Protocol)

IPSec operates at the operating system level, not the application level. Solaris 8 supports IPSec so you can use iPSec to set up tunnels between the gateway and the profile server to secure the connection.
Does this answer your question?
Kent

Does the 2106 WLC support multiple interfaces?

I am trying to lab something up and I believe I am doing something incorrectly. My management VLAN works fine, the AP on port 7 finds the controller fine, but my VLAN 80 doesn't seem to be mapped to port 2. I mapped a test WLAN to the VLAN, and setup a DHCP scope, and a client can get on the WLAN, acquire an IP address, etc. I thought I coudl then map that VLAN (80) to port 2 and have it go out a cable modem. Doesn't seem to be working that way, however.
Anyone know if this is supported, or what am I doing wrong?
Thanks in advance!

You are getting FANCY Tim!
For starters you should really use a switch because sometimes you may get odd behavior connecting right to the WLC. Also the WLC is like a layer 2 switch and doesnt route. Ive done something similar in fact. We call it offnet. We break out the ports and have 1 going external. We used a switch inbetween the ap and comcast line.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Does Siebel Management Server supports multiple gtwy servers/siebelservers?

Similar Messages

Maybe you are looking for