Does SignalExpress support USB-9211/15 & USB-6015/16 ?

Hi gsa,
Here is a list of hardware which is supported:
- NI M Series and E Series DAQ (DAQmx only)
- NI High-Speed Digitizers
- NI Signal Generators
- NI Dynamic Signal Acquisition (DSA)
- NI Analog Output
- Third-party devices (*Requires downloading or creating a LabVIEW based user-defined step)
You see, that you must program a LV based user-defined step in SignalExpress if you want to use the USB boards.
Regards,
Luca
Regards,
Luca

Similar Messages

Does signalexpress support keithley 2400 series source meter?

I am a stranger to labview, but willing to use Labview signalexpress 2.5 to realize data acquisition from keithley 2000 multimeter and keithley 2410c source meter.
After installation of drivers for 2000 and 2410 download from NI.com, I was able to choose the driver of keithley 2000 from signalexpress at the device setup, and It work well for data acquisition. However when I duplicate the same process for keithley 2410c, the driver installed was not availabe for selection. There are a few of drivers for 2400 series at NI.com, I downloaded the file of 16M for labview. Is it available for labview signalexpress?
By the way, both device were availbe in the GPIB (from the MAX, tests passed ) with different GPIB address.
Thanks for your help~
Message Edited by jackzhg on 04-17-2008 10:24 AM

Lynn,
If memory serves me correctly this is possible.
The easiest way I got it working was to first get it all ticking along ok in their Lua based IDE, then once the script was working perfectly I just used LV to send the script as text to the instrument over GPIB. Worked a treat.
nrp
CLA

Upgrade usb-9215 with usb-9162 for ni-daqmx

we have purchased usb-9215 last month. we are disappointed with daqmx-base we want to upgrade to daqmx and try it with measurement studio. it looks if we can shift to usb-9162 carrier we can upgrade to daqmx.
pls advice.
NI-DAQmx Upgrade for USB-9211 and USB-9215 Devices Installation Guide - July 2005 - Manuals NI-DAQmx Upgrade for USB-9211 and USB-9215 Devices Installation Guide - July 2005 - Manuals

Tom W. wrote:
Hi All- I want to point out an inaccuracy in John's post- the USB-9215 is NOT supported by NI-DAQmx. You must use a USB-9215A if you would like to program using the NI-DAQmx driver as the USB-9215 is and will only be supported by NI-DAQmx Base. Please check this KnowledgeBase for more details. Thanks-
Huh. I was relying on the readme.html file that ships with NI-DAQ 7.5, which lists simply "NI USB-9215".
I note that the article linked by Tom includes, "An upgrade kit is available for the USB-9211 and USB-9215."
If the original poster just bought his 9215, perhaps he can trade it in on a new one.
Tom- is NI still selling both? Is there a difference in specs, or just in the under-the-hood workings?
John Weeks
WaveMetrics, Inc.
Phone (503) 620-3001
Fax (503) 620-6754
www.wavemetrics.com

HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
More information on these topics can be found here:
How do I set up Time Machine to a shared drive on another Mac?
How do I set up Time Machine to a Time Capsule or Airport Extreme?
"Rotating" Time Machine backup disks

USBed itunes library from windows 7 comput to windows 8.1 comput, will not open "does not support .itl files" gave me a list of programs to choose from, could not find one to work

New laptop with 8.1, Used USB to transfer itunes library from windows 7 computer into My music on 8.1, cannot get it to play, I get the usual does not support extension itl message and a list of programs, a few of which I tried with no luck. songs are a mix of CDs and amazons, no songs actually bought from apple, but player dashboard is itunes. Just direct wired transferred to Droid phone and it worked first time.

did it work out for you . How did you activate the Windows 8 ??

HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed Ahmad

Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

TS2634 I am trying to connect my camera through a USB and it says it does not support this device

I just bought the USB connector for mynipadbandntried to connect my camera but it comes up does not support this device. What do I need to do in order to connect my camera ?

What model camera?
Cheers, Tom

Elements 8 does not support USB 2.0 Webcams?

From what I've gathered Adobe Premiere Elements 8 does not support USB 2.0 Webcams, only supporting USB 1.0 . Is there a driver or something to allow support for USB 2.0 Webcams?
- I have an Xbox Live Vision Camera.
- Windows 7 Professional (Awesome)
- Adobe Premiere Elements 8 trial version
I don't wat to buy this until I know my webcam will work. I liked the onion skinning ability of Adobe, but if I can't get my webcam to work it doesn't really help.
Thanks.

USB Web-cams pose all sorts of problems for most NLE programs. One possibility would be to use the capture software that came with the camera, of other, and then using the files in PrE. Depending on what the potential capture formats/CODEC's are available, conversion might be required.
Good luck,
Hunt

VB6 NI-USB-9237 DAQmxCreateAIVoltageChan selected physical channel does not support the measurement type required

I have a VB6 program with code that properly reads analog inputs from an NI-USB-6008.
I tried to re-use the code for a strain-gage module NI-USB-9237, but at the DAQmxCreateAIVoltageChan step I get the following error:
"Measurements: Selected physical channel does not support the measurement type required by the virtual channel you are creating.
Create a channel of a measurement type that is supported by the physical channel, or select a physical channel that supports the measurement type."
Should I be calling a function other than DAQmxCreateAIVoltageChan?
If so, what is it, or where can I find the reference for such functions?
Or - if that is the right function, should I pass different arguments? Currently I'm calling:
DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default, -10, 10, DAQmx_Val_VoltageUnits1_Volts, "")
Thanks in advance for your help
-Chris Hardy
Solved!
Go to Solution.

I figured it out from 372251a.PDF
First, the correct function is DAQmxCreateAIVoltageChanWithExcit
Second, you can't just ask for one sample on one channel - ask for 2 samples instead.
-Chris Hardy

Does LabVIEW support USB 2 interface?

I need to transfer data from the USB port 2 but I'm thinking of using LabVIEW for interfacing. Does LabVIEW support USB2?

Yes, you can talk to USB devices using the LabVIEW 7e VISA VIs (see the attached image of the VISA USB Function Palette).
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
VISA_USB_Function_Palette.gif ‏38 KB

Does anyone know about a VI for the NI USB-9211 thermocouple DAQ?

I just bought a USB-9211 from NI. It works fine if I run the VI, executable, that comes with it. However, I would like to change the LabVIEW code to play with the temperature data that I am collecting, but since the CD came with executables only, I can't access the code. I have never collected data from a USB-port before, so I guess if I had a code that would allow me to collect the data coming into the USB port, that would help me a lot. Does anyone know of a code I can use?
Thanks,
-jc

Hello jc,
If you click on the following link, it should take you to some example code written for the USB-9211. In the zip file there should be a VI as well as an executable. I'm assuming that the executable is the same one that you have seen. However, the VI should show you how to use the DAQmx Base driver to do thermocouple measurements with the USB-9211.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=ECF5A8CCAA164657E034080020E74861&p_node=201210&p_source=External
Hope this helps!
Take care,
E.Lee
Eric
DE For Life!

Does Garageband support 2 usb mic

Hi all
I am planning to records my podcast via Garageband. I have a question, does Garageband support 2 USB microphone at this same time ? Please help
Regards
PL

I am using two Audio Technica AT2020 USB microphones as an aggregate device and it works great in Garageband 6.0.4 on a MacBook Air. I would a just a few notes.
First, you may have issues with your USB ports supplying enough power for two microphones. I am using a powered USB hub and this works well.
Second, I see some issues if I shut down the computer and restart it. I may be doing something wrong, but ended up having to delete the aggregate device and create a new one for it to work properly. This is pretty easy and I have just taken to doing this each time rather than screwing around after starting GarageBand. Your mileage may vary.
Third, I am not able to control the volume on the two microphones in GarageBand - the slider is greyed out. In order to adjust volume, open the aggregate device in the Audio MIDI application and you can adjust the sliders there - this will work while GarageBand is running too. They defaul to a very low level for me and I find that this is needed to get a "hotter" signal in Garageband.
I went this route because I already owned one AT2020 USB. If I was starting over again from scratch I might have just gotten a USB interface/mixer and used regular microphones. Would probably make things easier and wouldn't cost much (if any) more since the AT2020 USB is $50 more expensive than the analog version.
FWIW, I have been really impressed with the quality of the AT2020 USB for recording acoustic guitar and voice.

Does Nokia Asha 501 comes with USB cable?

Does Nokia Asha 501 comes with USB cable?
Solved!
Go to Solution.

No it doesn't, scroll to the bottom of this link "What's in the box" http://www.nokia.com/global/products/phone/asha501-dual-sim/specifications/
Happy to have helped forum in a small way with a Support Ratio = 37.0

Can the USB-9211 Thermocouple Input device measure voltages ?

Can the USB-9211 be used to measure voltages ? It is designed for thermocouple measurements and its operating manual states there is a current source between its TC+ and TC- input terminals.
What amount of current is flowing ? Does it depend on the selected thermocouple type ? Can the current level be controlled by sotware ?
One application for me is to measure resistances of 1 ohm or less by measuring the voltage drop across the resistance induced by flowing a current through it. Might the 92111's current source be somehow used for this ?
What is its peak to peak input noise ? Its specs say 1 uV rms.
This is a delta-sigma converter. Is each successive measurement accurate or does some digital filtering have to be account for and thus it takes several readings for a signal change to become accurate ?

The 9211 measures voltages between 0 and 80 mV only. The current source is only use to force a full scale input if an open thermocouple is connected and cannot be controlled by software. The input impedance of each channel between TC- and TC+ is 20M Ohm. However, the current that flows in the amplifier is very small, 50 nA.
The main problem here is the fact that the current source is not controlled by the user. This means that connecting a resistor of 1 Ohm between TC- and TC+ would not just produce a voltage that maybe due to external exitation, but the internal source should also be taken into account. Since the user has control over it, it would be a guess work to try to make sense of any voltage value read in.
its peak to peak input noise is 1 uV rms as indicated in the specs.
So as long as the measurements allow for enough settling time (12S/s), each one is accurate.

Does SignalExpress support USB-9211/15 & USB-6015/16 ?

Similar Messages

Maybe you are looking for