Does Solaris 10 supports Lexmark PCL printers

Hi.
I need to know if Solaris 10 supports for sure PCL laser printers, I'm talking about Lexmark E120n (TCP/IP) and Lexmark E232 (Paralel). As I know these printers support PostScript with Mac OS only.
In technical specification of these printers is not mentioned that they support Solaris. However laser printers that support languages like PCL are able to work with other drivers. For example I used HP LaserJet 1200 with HP LJ4 driver and it worked fine (not on Unix !).
I checked drivers that are supplyed with Solaris, it has drivers for Lexmark Optra E and Lexmark E210.
Thank you.

In Lexmark. there are no Solaris drivers for E232 and E120.
These printers support only PCL.
All laser printers can work with other generic drivers that support its supported languages (PCL in my case).
In Printer Administrator, Solaris 10 has spooler for PCL printers.
I tryed and it works. However, Solaris 8 really can print only on PostScript printers.
Linux Fedora Core 5, has built in CUPS spooler and good print server.
I'll use it to share printer between other computers (based on Solaris 10 and other Operating Systems).

Similar Messages

  • Does Solaris 10 support cisco Virtual Port Channels over IP?

    Does anyone know if Solaris 10 support cisco Virtual Port Channels open IP?

    Hi user11114413,
    The issue you are seeing actually has little to do with VIP, and more to do with there being multiple IP addresses for us to choose from on your box. For such multi-IP boxes, you'll want to tell us the IP to use, and in your case you want to tell as a VIP. This can be done either by editing your operational configuration file, and including an <address> element within the <unicast-listener> element, or via the tangosol.coherence.localhost system property. For example:
    <unicast-listener>
        <well-known-addresses>
            <socket-address id="1">
                <address>1.2.3.260</address> <!--virtual ip -->
                <port>8088</port>
            </socket-address>
        </well-known-addresses>
        <address>1.2.3.260</address> <!--virtual ip -->
        <port>8088</port>
    </unicast-listener>or
    java ... -Dtangosol.coherence.localhost=1.2.3.260If you are using the same operational configuration on all nodes in your cluster then the system property approach is likely preferable, and would only be necessary on the two machines sharing the VIP.
    As for using VIP or an extended WKA list, the choice is yours, either will work. If you do go the VIP route, it would obviously be a very bad idea to simultaneously use the same VIP and port at the same time from the two machines.
    thanks,
    Mark
    Oracle Coherence

  • Does Solaris 10 support OmniORB v.4.1?

    Hi Guys,
    Just want to confirm if OmniORB v. 4.1 is still compatible in Solaris 10.
    If not any suggestion what can I use to replace OmniORB v.4.1?

    Hello Bruce,
    each new release adds some features and new kernels.
    It's not possible use patches to get these features.
    To support new systems between the release cycle (Solaris 10 3/05 GA, Solaris 10 1/06), there are <b>temporary</b> HW releases (Solaris 10 HW1, HW2).
    Btw. the <b>temporary</b> is a quote from the "Release Notes Supplement for Solaris 10 3/05 HW2".
    In Solaris 8 there have been PSR releases after the last "normal" release Solaris 8 2/02.
    The features from the HW releases are included in the next following release. That means the two HW releases are replaced by the Solaris 10 1/06.
    <table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
    The minimum OS version for 1.5 GHz UltraSPARC IV+ processors is Solaris 9 9/05 and Solaris 10 3/05 HW1
    The minimum OS version for 1.35 GHz UltraSPARC IV processors is Solaris 8 2/04, Solaris 9 4/04, and Solaris 10 3/05
    </td></tr></table>
    Unfortunately systems that can be upgraded to UltraSPARC IV+ are beyond the scope of these user-to-user forums.
    Michael

  • Does Solaris supports non-ASCII mount point?

    Hi,
    Does Solaris 10 supports non-ASCII mount point?
    Kind regards,
    Daniel

    # fstab generated by gen_fstab
    #<file system>   <dir>         <type>      <options>    <dump> <pass>
    none            /dev/pts      devpts      defaults        0     0
    none            /dev/shm      tmpfs       defaults        0     0
    UUID=496E-7B5E /media/STORAGE vfat    defaults,user,users,rw,exec,uid=777,gid=777   0       0
    /dev/sr0     /mnt/sr0_cd  auto     user,noauto,exec,unhide 0     0
    # This would do for a floppy
    #/dev/fd0        /mnt/floppy    vfat,ext2 rw,user,noauto    0     0
    #    +   mkdir /mnt/floppy
    # E.g. for USB storage:
    #/dev/sdb1        /mnt/usb      auto      rw,user,noauto   0     0
    #    +   mkdir /mnt/usb

  • Solaris 8 support for CMD-649

    Does Solaris 8 support the CMD-649 PCI to IDE device?
    dp

    Currently Solaris 10 is not supported in CSA 5 or the upcoming CSA 6. I am told that they will be adding Solaris 10 for CSA 6 but it is unknown as to when this will be released.

  • Does solaris dhcp server support user class

    Does solaris dhcp server support user class(option 77). In my environment, solaris dhcp server seems just ignore this option set in the client dhcp discover.
    Does anybody can help me.

    The clients are all Windows 7 x64 (but I've replicated the problem on MacOS and Solaris clients). The server is Solaris 11 x86.
    For the problem to be the ARP cache, wouldn't the client's MAC address have to change during the reboot (i.e. the change in the client's MAC address is what causes the ARP cache to get confused, and hence the client gets blocked because of the MAC mismatch)?
    Edited by: user13534003 on May 9, 2012 1:43 AM
    Edited by: user13534003 on May 9, 2012 1:46 AM

  • Does Solaris 11 Express support 8vCPU?

    I am trying to install Solaris 11 Express Live DVD on Vmware ESX 3.5. I am facing issue while creating VM with 8VCPU.
    Does Solaris 11 express supports that? Pleas send me the link if any which states that?

    My posting above regarding the T510 is an Intel Core i7 620m - as stated, works fine - 2 Cores, 2 threads per core, 4 vCPUs
    psrinfo -v output
    Status of virtual processor 0 as of: 12/08/2010 14:45:10
    on-line since 12/08/2010 08:10:57.
    The i386 processor operates at 2660 MHz,
         and has an i387 compatible floating point processor.
    Status of virtual processor 1 as of: 12/08/2010 14:45:10
    on-line since 12/08/2010 08:11:00.
    The i386 processor operates at 2660 MHz,
         and has an i387 compatible floating point processor.
    Status of virtual processor 2 as of: 12/08/2010 14:45:10
    on-line since 12/08/2010 08:11:00.
    The i386 processor operates at 2660 MHz,
         and has an i387 compatible floating point processor.
    Status of virtual processor 3 as of: 12/08/2010 14:45:10
    on-line since 12/08/2010 08:11:00.
    The i386 processor operates at 2660 MHz,
         and has an i387 compatible floating point processor.

  • Does OS 10.9.4 support HP 2605 printers?

    Does OS 10.9.4 support HP 2605 printers? I can't print out PDF files on my HP 2605 color laser jet printer.  It will print emails, and some Word files.  I believe I'm using the latest HP print driver.

    Please contact HP tech support for assistance. Also read the manual for your printer to assure correct setup.
    OS X- Printer and scanner software available for download
    OS X Mavericks- Set up a printer

  • Does iMac support epson 1800 printers  with os 10.6.8?

    I am trying to use an epson R1800 printer with my iMac.  It prints very dark photos that do not match the screen image.  Does this OS support these printers. Have other users seen this problem.  Is there any help out there?
    Thanks,
    Jo

    If you upgrade an iOS device to iOS 7, iTunes version 10.7 is sufficient.
    iTunes 11.1.3 does indeed work on OS X 10.6.8. To my knowledge, iTunes 10.7 will also run on OS X 10.6.8.

  • SOLARIS OS Support for Advance Format Hard Drives

    Hello,
    I am fairly new to the UNIX Operating System so I'm hoping that someone can help me. Does Solaris support the new Advance Format hard drives (4k sector boundaries)? I cannot find any mention of the advance format drive in the Oracle literature. I believe, based on my recent reading that Open Source Solaris depends on ZFS to handle the support of the new 4kbyte sector size.
    Thank you in advance for any information you can supply.
    Steve

    Moderator Action:
    This post has been moved to the Solaris 10 forum.
    @ O.P.,
    You originally posted your inquiry to the Clustering forum, which has nothing to do with the topic of disk cluster size.
    Glance at the documentation for Oracle Cluster 4.0 to see what clustering is all about.

  • Does Solaris 10 work on Microsoft Virtual PC 2007?

    Does Solaris 10 work on Microsoft Virtual PC 2007?

    welcome to macbook forum.
    it should work just fine since boot camp with XP or vista, will act as a PC laptop.
    But the problem might be when you have to select the partition for installing your other guest OS, unless you point that guess OS (win 2000, another XP or else) to external HD if virtual PC support guess os from external connection.
    Good Luck.

  • Does Mountain Lion support Epson Printer R800?

    Does Mountain Lion support Epson Printers R 300 and R 800

    I installed Maverick and it does`nt support these 2 printers. I want to know if Mountain Lion does

  • I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS.  If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

  • Does Solaris have file size limination?

    Dear Sir:
    Does Solaris or other UNIX OS have file size limination ?
    If yes, Please tell me
    where the manual or any documents refered ?
    Thanks Nicolas

    Hi Nicolas,<BR><BR>
    SunOS and Solaris 2.3 through 2.5.1 support file sizes up to 2GB<BR>
    in size. By size, it is understood that a file has with it, its<BR> own overhead (inode information, etc.) so closer investigation may<BR> reveal that the file in question is somewhat short of actually<BR>
    being 2GB in size.<BR>
    Solaris 2.6 has introduced the concept of largefiles.<BR>
    A largefile, indicates a file that has a size between 2GB<BR>
    and 1Tb (terabyte). <BR><BR>
    Here is a table of file and file systems limitations (for UFS)<BR> depending on Solaris releases:<BR><BR>
    <PRE>
    Single File File System
    SunOS 4.1.x 2Gb 2Gb
    SunOS 4.1.x + ODS 2Gb 1Tb
    Solaris 2.0-2.5.1 2Gb 1Tb
    Solaris 2.0-2.5.1 + SDS 2Gb 1Tb
    Solaris 2.6 ~800Gb 1Tb
    Solaris 7          ~800Gb          1Tb
    Solaris 8          ~800Gb          1Tb
    </PRE>
    <BR>On Solaris 2.6 and upwards, have a look at the manpage for<BR> largefile(5) or go to http://docs.sun.com and search for "largefile".
    <br><br>
    Hope this helps.<BR><BR>
    Caryl<BR>
    Sun Developer Technical Support<BR>

  • Does Canon iR3225 supported by Sap?

    Does this printer supported?
    IF so,please kindly suggest the device type for it.
    Regards
    Shiro

    or you  download a device type from Canon web site.
    http://software.canon-europe.com/software/0033307.asp?model=
    device type:ZCN30P (for PCL model) / ZCN30S (for PostScript model).

Maybe you are looking for

  • Aggregation problem in BW...

    Hi,   I am facing a problem writing a formula in a Bex query.I have a calculation in a query which is Tot = Summation((A-B)/A) I have a jump query from this query and in the jump query i have a formula written in cell editor which is supposed to do F

  • What is going on with apps,cannot search, cann ot locate previously purchased apps such as audubon birds. Not interested in angry birds, I want reference guides for gawd's sake

    SEARCH IS INEFFECTIVE, CANNOT LOCATE PREVIOUSLY PURCHASED BIRDING REFERENCES, I AM NOT INTERESTED IN ANGRY BIRDS I AM LOOKING FOR THE AUDUBON GUIDES

  • Cant open ipod

    Since a few day i cant open the ipod on the iphone. it load for 30 seconds but after that just the normal programms are shown on the screen. do i have to reload my iphone, and is it absolutelly save when i use a backup after that? i wont lost anythin

  • Increasing the width of scroll bar

    Hi, I have a table which is added to a JScrollPane and a JScrollBar is added. How do I increase the width of the JScrollBar? I have tried b.setSize..... and no luck :(         //Create the scroll pane and add the table to it.         JScrollPane scro

  • How can I assign " " in ssis flat file ?

    Hi, I want to each record should had start  " and  end  " i.e., "SJDD", "DKLJJ" So flat file conncetion manager text qualifier entered _x0022_ but finall output generated like::It is an error _x0022_4139801_x0022_,_x0022_NJ270_x0022 So  plz help to r