Does Solaris support VRRP?

Can you run Virtual Router Redundancy Protocol on Solaris 2.6 or greater?

Solaris 9 and 10 have the cdrw(1) command to write CD or DVD
media using an MMC-compliant CD/DVD recorder device.
On Solaris 9 you may have to install the latest cdrw patch to get
DVD support.

Similar Messages

Does Solaris supports non-ASCII mount point?

Hi,
Does Solaris 10 supports non-ASCII mount point?
Kind regards,
Daniel

# fstab generated by gen_fstab
#<file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
UUID=496E-7B5E /media/STORAGE vfat defaults,user,users,rw,exec,uid=777,gid=777 0 0
/dev/sr0 /mnt/sr0_cd auto user,noauto,exec,unhide 0 0
# This would do for a floppy
#/dev/fd0 /mnt/floppy vfat,ext2 rw,user,noauto 0 0
# + mkdir /mnt/floppy
# E.g. for USB storage:
#/dev/sdb1 /mnt/usb auto rw,user,noauto 0 0
# + mkdir /mnt/usb

Does Solaris support GPT?

Any idea does the latest version of the Solaris support GPT (GUID Partition Table)?
Thanks,
- Johnny

tanww888 wrote:
Any idea does the latest version of the Solaris support GPT (GUID Partition Table)?
Go take a peek in Google.
Use keyword `gpt` for your search.
First result: http://en.wikipedia.org/wiki/GUID_Partition_Table
Perhaps leave that Wikipedia reference as a bookmark in your browser, so as to have a reference for changes that might appear.
See section 6.1 of that Wikipedia entry:
http://en.wikipedia.org/wiki/GUID_Partition_Table#Unix-class_operating_systems
Additionally, using gpt + solaris for Google keywords, there are additional links to be found.
Lastly, here is a forum discussion from September 2010:
OVM server cannot install on GPT boot partition
Granted, it involves GPT and Linux, but there are points in there to consider with regards to your choices for hardware.

Does SAP support Solaris 10 ZFS filesystem when using DB2 V9.5 FP4?

Hi,
I'm installing NW7 (BI usage). SAPINST has failed in the step "ABAP LOAD due to the DB2 error message
"Unsupported file system type zfs for Direct I/O". It appears my Unix Admin must have decided to set these filesystems as ZFS on this new server.
I have several questions requiring your expertise.
1) Does SAP support ZFS filesystems on Solaris 10 (SPARC hardware)? I can not find any reference in SDN or Service Market Place? Any reference will be much appreciated.
2) How can I confirm my sapdata fielsystems are ZFS?
3) What actions do you recommend for me to resolve the SAPINST errors? Do I follow the note "Note 995050 - DB6: NO FILE SYSTEM CACHING for Tablespaces" to disable "Direct I/O" for all DB2 tablespaces? I have seen Markus Doehr's forum Link:[ thread|Re: DB2 on Solaris x64 - ZFS as filesystem possible?; but it does not state exactly how he overcame the error.
regards
Benny

Hi Frank,
Thanks for your input.
I have also found the command "zfs list" that would display any ZFS filesystems.
We have also gone back to UFS as the ZFS deployment schedule does not meet this particular SAP BW implementation timeline.
Has any one come across any SAP statement that states NW7 can be deployed with ZFS for DB2 database on Solaris SPARC platform. If not, I'll open an OSS message.
regards
Benny

Does SRP series routers support VRRP?

Hi,
can somebody check if SRP routers support VRRP or HSRP? In documentation isn't this capability mentioned. I need make a backup to my main IOS based router.
Regards, Martin

Hi,
the console port indeed does not support RS232 modem control (data set ready/Data Carrier Detect (DSR/DCD), data terminal ready (DTR)). However, you cannot change the settings on the console port. You need to configure your modem to to ignore DTR and assert autoanswer. The associated Hayes-compatible commands are AT&D0 and ATS0=1, respectively.
Regards,
Nethelper

Does solaris dhcp server support user class

Does solaris dhcp server support user class(option 77). In my environment, solaris dhcp server seems just ignore this option set in the client dhcp discover.
Does anybody can help me.

The clients are all Windows 7 x64 (but I've replicated the problem on MacOS and Solaris clients). The server is Solaris 11 x86.
For the problem to be the ARP cache, wouldn't the client's MAC address have to change during the reboot (i.e. the change in the client's MAC address is what causes the ARP cache to get confused, and hence the client gets blocked because of the MAC mismatch)?
Edited by: user13534003 on May 9, 2012 1:43 AM
Edited by: user13534003 on May 9, 2012 1:46 AM

Does Solaris 11 Express support 8vCPU?

I am trying to install Solaris 11 Express Live DVD on Vmware ESX 3.5. I am facing issue while creating VM with 8VCPU.
Does Solaris 11 express supports that? Pleas send me the link if any which states that?

My posting above regarding the T510 is an Intel Core i7 620m - as stated, works fine - 2 Cores, 2 threads per core, 4 vCPUs
psrinfo -v output
Status of virtual processor 0 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:10:57.
The i386 processor operates at 2660 MHz,
     and has an i387 compatible floating point processor.
Status of virtual processor 1 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:11:00.
The i386 processor operates at 2660 MHz,
     and has an i387 compatible floating point processor.
Status of virtual processor 2 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:11:00.
The i386 processor operates at 2660 MHz,
     and has an i387 compatible floating point processor.
Status of virtual processor 3 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:11:00.
The i386 processor operates at 2660 MHz,
     and has an i387 compatible floating point processor.

Xdb_installation_trigger does not support object creation of type SNAPSHOT

hi everyone, i'm using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit on solaris sparc 5.10
we like to send an email through SSL, and after searching here and there I found out that oracle DB 11g able to go throught the SSL.
since upgrade our DB to 11g would not be an option, so i tried to export XDB of 11g and import it into XDB 10gR2 schema, it was a mess...
then i just reinstall XDB using catnoqm.sql & catqm.sql
and now one of our programmer cant run some script like above
CREATE MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY
TABLESPACE MARKETING_TABLES
PCTUSED    40
PCTFREE    10
INITRANS   2
MAXTRANS   255
STORAGE    (
INITIAL          64K
MINEXTENTS       1
MAXEXTENTS       UNLIMITED
PCTINCREASE      0
FREELISTS        1
FREELIST GROUPS 1
BUFFER_POOL      DEFAULT
+)+
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
AS
+/* Formatted on 9/23/2010 1:07:42 PM (QP5 v5.114.809.3010) */+
SELECT   coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date,
SUM (scheme_adm) scheme_adm,
SUM (appl_unit) appl_unit,
SYSDATE mkt_sysdate
FROM   (SELECT   NVL (a.coy_id, '01') coy_id,
a.branch_id appl_branch_id,
DECODE (a.buss_unit, 'NMC', '2101', 'UMC', '2102', '2352')
appl_object_code,
a.platform product_type,
TRUNC (c.contract_active_date) ppdcf_paid_date,
NVL (s.ms_amt, 0) scheme_adm,
NVL (o.total_item, 0) appl_unit
FROM   ordmgmt.om_trn_appl_ms_lvl_object s,
ordmgmt.om_trn_appl_hdr a,
acctmgmt.ar_trn_sum_contracts c,
+( SELECT appl_no, COUNT ( * ) total_item+
FROM   ordmgmt.om_trn_appl_object
GROUP BY   appl_no) o
WHERE       s.appl_no = a.appl_no
AND a.appl_no = o.appl_no
AND s.ms_code IN ('MS03', 'MS14')
AND c.appl_no = a.appl_no
AND c.contract_no = a.contract_no
+/*AND c.office_code = a.branch_id*/+
AND NVL (a.coy_id, '01') = NVL (c.coy_id, '01'))
GROUP BY   coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date;
COMMENT ON MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY IS 'snapshot table for snapshot MARKETING.FIFSYS_MKT_SCHEME_MV_COY';
and this error shown:
ORA-00604 error occurred at recursive SQL level 1
ORA-20000 Trigger xdb_installation_trigger does not support object creation of type SNAPSHOT
ORA-06512 at line 32
maybe some of you know how to solve this problem??
and, this in the script of the xdb_installation_trigger
DROP TRIGGER SYS.XDB_INSTALLATION_TRIGGER;
CREATE OR REPLACE TRIGGER SYS.xdb_installation_trigger
BEFORE
CREATE ON DATABASE
DECLARE
sql_text varchar2(200);
val number;
BEGIN
if (dictionary_obj_owner != 'XDB') then
if (dictionary_obj_type = 'FUNCTION' or
dictionary_obj_type = 'INDEX' or
dictionary_obj_type = 'PACKAGE' or
dictionary_obj_type = 'PACKAGE BODY' or
dictionary_obj_type = 'PROCEDURE' or
dictionary_obj_type = 'SYNONYM' or
dictionary_obj_type = 'TABLE' or
dictionary_obj_type = 'TABLESPACE' or
dictionary_obj_type = 'TYPE' or
dictionary_obj_type = 'VIEW' or
dictionary_obj_type = 'USER'
+)then+
if (dictionary_obj_type != 'PACKAGE BODY'
+) then+
sql_text := 'select count(*) from ALL_OBJECTS where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
sql_text := 'select count(*) from dropped_xdb_instll_tab where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
insert into xdb_installation_tab values
+(dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type);+
end if;
end if;
end if;
else
raise_application_error(-20000, 'Trigger xdb_installation_trigger does not support object creation of type '||dictionary_obj_type);
end if;
end if;
end;
+/+
/********************************************************************************/

i'm so careless, after checking a fresh installation of the same version DB, i dont found xdb_installation_trigger.
so just by simply remove that trigger & everything works just fine. :)

DRG-10849 catsearch does not support functional invocation

I have this error message: DRG-10849 catsearch does not support functional invocation
this is my query:
SELECT *
FROM
(SELECT
/*+ FIRST_ROWS(50) */
NTQ.*,
ROWNUM RNUM1
FROM
(SELECT
/*+ INDEX(DL_TSD_DEFTR_CI) */
FROM ima_ol.DL_TSD_SITUATION s
WHERE (CATSEARCH(DEF_TRANS,'milano ',NULL)>0)
AND (s.FORECAST = 0)
AND (s.STATE IN (1,0,4))
AND (s.ARCH_STATE = 0)
ORDER BY s.VET_TS DESC
) NTQ
WHERE ROWNUM <=50
WHERE RNUM1 >=1
my oracle and system version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
"CORE 11.1.0.7.0 Production"
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
have suggested that to solve the problem I should alter the statistics of the offending table to force to use this index how do I do?
thanks in advance

there is a topic which is older. maybe it helped.
Oracle Text 10g Release 2

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

Does SAP support running Solaris10 X64 X86 on VMWARE?

Does SAP support running Solaris10 X64 X86 on VMWARE?
Thanks.

Hello,
no, Solaris 10 as guest OS in a VMware ESX environment is not supported for productive usage.
Rgds,
Roland Wartenberg
SAP
SAP Virtualization Week 2010 is coming
April 13-15, 2010
www.sapvweek.com

Does Solaris 10 work on Microsoft Virtual PC 2007?

Does Solaris 10 work on Microsoft Virtual PC 2007?

welcome to macbook forum.
it should work just fine since boot camp with XP or vista, will act as a PC laptop.
But the problem might be when you have to select the partition for installing your other guest OS, unless you point that guess OS (win 2000, another XP or else) to external HD if virtual PC support guess os from external connection.
Good Luck.

X does not support locale

Hellow, i setup SGD 4.2, but when i start an application or object manager via ttwebtop locally on the server. I get this error messages everytime after starting:
/opt/tarantella/bin/ttwebtop -url http://localhost/tarantella.
bash-2.05# /opt/tarantella/bin/ttwebtop
X does not support locale
Cannot set input modifiers
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
bash-2.05#
Can anyone help me.
Extra input:
Solaris 9/05 SPARC
THX

Did you ever get this working?

Error -11040 Driver does not support this function- Informix SE db

Hello,
Weu2019re getting an error -11040 "Driver does not support this function" when trying to connect to an ODBC data source to an InformixSE database. This is with Crystal 2010 and 2008 on a Windows XP sp2 box. Weu2019re trying to use the ODBC(RDO) choice for a new connection.
The Informix ODBC driver has been loaded. We tried 3 versions, the 2.40 and 3.70(latest) ones from IBM, and one that I believe came with Crystal (CR xxxx). I tried turning on the ODBC trace file, but it didnu2019t write anything to the log. We are supplying the same log in credentials as with Excel.
   The Informix database we use is Informix SE (Standard Engine) v5.10 on separate machine running Unix (Aix) with the Informix-Net daemon running to handle odbc connectivity. We are able to connect from Excel to the Informix database.
I donu2019t know what ODBC function Crystal may be expecting from the driver that it doesnu2019t seem to support and how to tell Crystal to not need it.
Thanks,
Mike

Hi Mike,
According to the Platforms for DB support we only support these Informix data sources:
IDS (Informix Dynamic Server)     11.50       32 bit       64 bit        Linux               AIX                   Solaris
IDS          IDS Client 11.5                                     Direct     Direct     Not Supported     Not Supported     Not Supported
ODBC      IBM Informix ODBC SDK 3.50             Direct     Direct     Direct             Direct             Direct
ODBC      DataDirect ODBC 6.0 SP2 (10)      Direct     Direct     Direct             Direct             Direct
You may want to try the Data Direct 6.x drivers as a test.
CR in the .NET IDE is running under 32 bit mode so make sure you are using the 32 bit Client.
Don

BEA AquaLogic User Interaction product does not support LINUX

Hi all,
I realised that ALUI does not support installation for LINUX.(pls see download link at http://commerce.bea.com/showproduct.jsp?family=ALI&major=6.1&minor=0).Does anyone know the plans about this topic?What is BEA's roadmap?

ALUI does currently support Linux (both Red Hat & SuSE) with the the 6.0 SP1 version. The latest version (i.e. 6.1) will support Linux when the first Service Pack for 6.1 is released - tentatively scheduled for the first half of next year. ALUI 6.1 currently supports Windows, Solaris & AIX.
ALUI 6.1 is aligned with how BEA licenses other products where the product is essentially available to download and install for an evaluation period for free. Previous versions of ALUI (including 6.0 SP1) are only available for download for paying customers or partners. Correspondingly, only paying customers or partners can log into the ALUI support site.
The UI Customization Installer for 6.1 (for Windows) is currently available for download and eval from http://commerce.bea.com/showproduct.jsp?family=ALI&major=6.1&minor=0
john

Does Solaris support VRRP?

Similar Messages

Maybe you are looking for