Does someone have a driver for kloehn pumps

I would like to control a Kloehn syringe pump with Labview 7.0 via a DAQCard. Has anyone written a driver for these pumps that you would be willing to share?

Hi mtngirl,
I've searched through our Instrument Driver Network, Kloehn's website, and Google for any driver for a Kloehn syringe pump without success. I was able to find a book on Amazon.com, "Practical Pharmaceutical Laboratory Automation", that has commands that you can use to control a Kloehn device (listed in the index), but I'm not sure if you have it already or not.
Also, I read through the "Pumps" page of the information on Kloehn's website, and it says the "V6 Module is a full featured, ready-to-use syringe pump with extra built-in capabilities. Simply add a 24 VDC power source and a control command logic (via RS485 or RS232) and this module is ready to perform." I'm not sure if this is true for all Kloehn pumps, but as it takes commands via RS485 or RS232, you will more than likely need to control your device with a serial cable, rather than a DAQCard.
In any case, it looks like your best bet from this point is going to be to request a driver, if you haven't already. You can do this by going to the Instrument Driver Network, and following the link to "Request Drivers". Hopefully this helps you on your way. Good luck!
Logan S.

Similar Messages

Does Lookout have a driver for SLC 5/05 and 1500 over ethernet

Does Lookout communicate with the AB SLC 5/05 over ethernet and the AB 1500 via the Net DNI over ethernet ?

Several years ago (back in Lookout 3.8 days) there was ethernet for AB SLC-5/05, it was a choice on the pull down menu for the communications type. It works great.
then in the days of Lookout 5.X, NI removed the ethernet for AB SLC-5/05. I believe the issue was that some users were having difficulty in understanding the I/O addressing, expecially when they would have an analog input/output card in the chassie. The issue is that RSLogix 'neatly' organizes this I/O table for us, however, NI can only get the I/O table in its 'raw' form. And this caused confusion for users not experienced with how the I/O table is truly layed out. A user can experiment with a bench/test system and see how the I/O is layed out and get a good understanding. But a another method is to write the analog input value to a "N" file address, and use that in Lookout (remember only the I/O is the issue) Also, you can have Lookout write to another "N" file address, and in the SLC, move that "N" address to the Analog Ouput.
I still have a SLC file for Lookout that has the ethernet enabled (works with Lookout V5.x) but I bet Ryan can send you one if you need it.
I have upgraded to Lookout V6.2 and making a driver object to talk to AB SLC-5/05 on ethernet works great. (I love native drivers, and hate using RSLinx OEM to do OPC (for out ControLogix5000 processors)
If a person can work thru how I/O tables are truly layed out (one big matrix actually) go direct and dont' use OPC.
Remember, this isn't a fault/limitation of Lookout or NI, it is how AB layes out their I/0 table, and how the addressing we see in RSLogix is actually not the true representation of the actual matrix. (and this matrix is all that is actually available, AB just makes it more 'readable' because you (or who ever setup the chassie configuration) told RSLogix what cards are in which slot, so RSLogix can minipulate the table to show it to you more 'pretty'.
If NI would add a chassie configuration to the AB SLC driver, then this issue would not exist. But I don't think we want to do that.
Hope this was helpful!
Rich Anderson

Does someone have a VI for ASL F200 Digital Thermometer?

I'm looking for a driver or VI for Automatic Systems Laboratories (ASL) F200 Digital Thermometer. Is there someone out there that wrote one?

here's a website with some demo software if your in a hurry
http://www.calisouk.com/downloadpage.htm
Do you know if the manufacure has a list of there communication commands?

I have been experiencing excessively slow upload speeds. like, what the malfunction. does someone have an explanation for such?

when uploading a movie either to theater or to share, i have been experiencing excessively slow upload speeds, as well as varying upload time.
-excessively slow speeds, such as a 1-minute video requiring more than 1-hour 44-minutes to upload.
-varying upload speeds, as in the status circle will report an upload time of 1-hour, and moments later report an upload time of 4-hours.
also, when selecting "iMovie" as an application, it requires an excessive amount of time simply to load and appear on the monitor.

Hi Julio,
We have removed the class-map for IPS and have done a clear local-host.
We have also changed the duplex (from Auto to full) and speed (from Auto to 100Mbps) on the outside interface.
it seemed the duplex we 've got was half when it was configured as Auto. We've asked our ISP to change in their side to full, but we've got half instead.
We did an upload test after those actions, the speed we got is 300KBps, it should be 8Mbps (download and upload).
when we send many upload at a same time, we can see from our monitoring tool that the bandwidth used is 8Mb.
We wonder we cannot get high speed when uploading a single file, the max speed is 300KBps.
Please, find below the output of
sh int | inc error
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 1 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 1 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 1 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 2710 collisions, 3 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 0 interface resets
the 2710 collisions is on the outside interface (i think it was before changing duplex)
sh cpu
CPU utilization for 5 seconds = 2%; 1 minute: 1%; 5 minutes: 1%
when we plug a computer directly to the ISP device (IDU), the speed is high (about 650KBps).
what would you suggest us to do? (sure, we will rate all the helpful posts )

DOES SOMEONE HAVE TO DIE FOR THIS COMPANY TO HELP ITS CUSTOMERS

I SPENT A TOTAL OF $600 ON TWO IPODS, MY FIRST PURCHASES FROM THIS COMPANY ONLY FOR ITUNES NOT TO WORK, WHAT KINDA COMPANY IS THIS THAT FORCES PEOPLE TO UPGRADE SOFTWARE AND ONLY ALLOWS DOWNLOADs FROM ONE PROGRAM ????
I'VE BEEN TURNED OFF THIS COMPANY FOR LIFE, I'LL STILL TRY TO GET MY IPODS TO WORK, BUT I WILL NOT PURCHASE ANYTHING FURTHER FROM THIS COMPANY AND WILL BADMOUTH IT FOR THE REST OF MY LIFE.

I'd rather they let us use some other application than bundling itunes with iPod and forcing us to use it ? You do realize that these very expensive ipods are essentially useless if iTunes doesn't work, I'm no fan of walking around with an ipod without any songs in it.
Where is the customer service ?, what's a number we can call that is open later than 6 pm to address some of these issues ?? an email address ?? If you can't produce a competent software, put a warning sign, saying that this product might not work with Windows, what kinda company leaves it customer base hanging like this with no place to turn ?? I shouldn't have to take Software 101 to make an Mp3 player work.

Does maverick have a driver for the Epson stylus photo R1900, Does maverick have a driver for the Epson stylus photo R1900

I tried first with Epson but they referred me to Apple. My printer is Epson stylus photo R1900, I am interested in instaling Maverick

Hi,
I am not sure if the Printer is compatible with Mavericks, but found the Drivers for the Epson Stylus Photo R1900 Ink Jet Printer in Epson Official Website. You can go through the below link
https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=94511&BV_UseBVCook ie=yes&infoType=Downloads&platform=OSF_M_X9

Does anyone have a driver for a Waters 2487 UV/Vis detector?

I use the detector as a stand alone instrument. It is also a HPLC detector.

Hi,
Is it only this instrument you are having problems with?
Have you tried using the LabVIEW<->GPIB.vi found in ..\LabVIEW\EXAMPLES\INSTR\smplgpib.llb. It using GPIB function calls instead of VISA. This will eliminate whether you have a GPIB card problem or just VISA problem.
Is it possible to attach your VISA Write in Simple Test.vi so that others might be in a better position to help you.
Ray Farmer
Regards
Ray Farmer

Does Lenovo have a driver to support winscard for nfc development?

I'm developing an nfc app on my lenovo thinkpad. Does Lenovo have a driver to support winscard for nfc development?

Dear Web32
Welcome in lenovo community
The only supported card on this model is Intel 7260 2x2, 802.11 BGN .and the applicable BIOS version is 96CN29WW (V1.15)
Can you please explain more what is the issue with your Wifi
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive. Some manufacturers of drives aren't for sure their drive will work with the new system. Does anybody have any suggestions for drives that will workw

There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
Clinton

HT1339 my older iPod my husband wants to use and his netbook does not have cd drive. How do I down load iPod and iTunes info for this product so he can now use it?

my older iPod my husband wants to use and his netbook does not have cd drive. How do I down load iPod and iTunes info for this product so he can now use it?

Your question(s) is/are a little hard to understand. So your husband has an iPod as well as a netbook and he wants to be able to sync iPod with this netbook is that correct? If so, he'll need to first download and install iTunes assuming the netbook is running some version of Windows such as 7, Vista, or XP.
http://www.apple.com/itunes/download/
As for importing or ripping music, he'll have to either use an external CD/DVD drive that is attached via USB or rip the songs to another PC you have with a built in CD/DVD drive. Once you have imported them to the other computer, you can transfer the songs to an external hard drive or to his iTunes library via Home Sharing.
If this isn't quite what you were looking for, please clarify.
B-rock

My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive

My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive. The hard drive has been in service for almost two years performing this function with no sign of failure. How do I adjust time machine perameters?

The only way to limit the size of the backup is to exclude data from the backup, which you can do in Time Machine preferences.
If you use multiple browsers, have you tried clearing your browser caches? However, that's just a stop gap if it works. You either need to limit what you backup or get another drive.

Does Apple have any plans for a similar app as Samsung S Drive?

Does Apple have any plans for a similar app as Samsung S Drive?
Samsung recently released 'S-Drive' - an app for their Samsung Galaxy program which only allows certain features to be used when driving. I much prefer my Apple iPhone, but as my children grow up, this is much safer. Thoughts?

Ah, sorry fellas, and thanks for clarifying that for me. I thought Apple would also have tech's who monitor / respond in these forums. My bad. Cheers though... and let's see what they (might) do.
Is there any way to encourage them / let them know of apps such as this and that it might be a good thing?

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@

yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

I cannot send e-mailfrom my 3G. I'm an error rejected by the server because it doesn't allow relaying. Does someone have a fix?

I am getting a server rejecting my email because it doesn't allow relaying. Does someone have a fix?
Thanks.

Head to Settings -> Mail, Contacts, and Calendars and tap on the account having the issues sending email. On the proceeding view, click Account button that lists the email address at the very top of the screen.
Then scroll down to Outgoing Mail Server and make sure the correct outgoing mail server is set as the Primary mail server for the account. Lastly, make sure all other smtp servers listed are turned Off.
B-rock

Does someone have a driver for kloehn pumps

Similar Messages

Maybe you are looking for