Does someone know why september of 1978 does not exist on my iPhone?

I am trying to create a birthday alarm on september of 1978 and it doesn't work.

I edited one of mine and was able to set the birthday to Sept 15, 1978 so it's not an iOS issue.
Try setting it to the 14th and see if that holds. Then try the 15th.
If still a problem, try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Similar Messages

My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114119)

Do someone knows why the secondary click does´t work after the mac os lion´s installation?

Well,after that I´ve installed the new Mac OSX Lion...and navigate trough the panel,I see that the secondary click doesn´t work. I mark it in the trackpad´s panel but when I open it again,it shows the option with no mark,do someone knows why?

Same here. Tried a restart but that didn't help.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

TS3802 I don't know why my Mac hardly connects to the Internet. The Internet bars are there but it does not browse, while my iPhone does.

I don't know why my Mac hardly connects to the Internet. The Internet bars are there but it does not browse, while my iPhone does.

If other Internet applications such as Mail and iTunes also don't work, run the Network Diagnostics assistant. How far do you get?

Why Table or View does not exist???

Hi to all. I have an issue with my Business Objects. I have a relationship between two entities with the following cardinality:
EntityA 1......* Entity B, the relation is a composition and the IDs for them are DB Sequence.
I have created the corresponding views and the view link and they all work fine in the Application Module. Also, in the View Object for the EntityA ( ViewObjectA ), I have created a View Criteria, a nested one, with two attributes: the first one is an att from the*ViewObjectA* and use a value from a bind variable (Integer), and the second one is an attribute from the Entity B son and it's value is static (1). I tested with the query button and says OK. When I run the AppModule for test the ViewCriteria, I got this error: ORA-00942: table or view does not exist . And for my sorprise, I checked the query resultant and it's wrong!! Please see an example below:
SELECT Att1,Att2 FROM EntityA WHERE ( ( ( (EntityA.att1 = :id ) AND (EXISTS(SELECT 1 FROM EntityBNQ1 EntityBNQ1 WHERE ( (*EntityBDNQ1.att1 = :id*) ) AND ( EntityA.att1 = EntityBDNQ1.att1 ))) ) ) ) AND (EntityA.att1 = EntityBDNQ1.Att1))) ) ) )
As can be seen, the name of the tabla for the EntityB has NQ1 attached, and I don't know why. The view link works perfectly, as also the create operation for both ViewsObjects.
Please can anyone tell me what I'm doing wrong, if I have a mistake? What should I do??
Thanks in advance.
PS: In a new application, I created a Business Components from DataBase, and it works my WiewCriteria. I just can't believe that I should start all over again.
Thanks in advance again.

Hi and thanks for the answers. Apologize for my forgetfulness of the version. It's 11.1.1.5.0 and ADF Business Components 11.1.1.60.13
I created a new Application and I made a Business Components From Table with only the two Entities mentioned before. Once configured (Put the ID as a DBSequence), created the views an the View Criteria and it's just all fine.
Hear is fragment of the XML from my EntityA (the god one). The first part it's the key attribute, the second one its the key.
This is the god working version
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="Person"
Version="11.1.1.61.92"
DBObjectType="table"
DBObjectName="EntityA"
AliasName="Person"
BindingStyle="OracleName"
UseGlueCode="false">
<DesignTime>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <AttrArray Name="_publishEvents"/>
</DesignTime>
<Attribute
    Name="EntityId"
    ColumnName="EntityA_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityA"
    PrimaryKey="true"
    IsUpdateable="while_insert"
    Domain="oracle.jbo.domain.DBSequence" //Different
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="39"/> //Different, but don't think it's important
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntitiA_SEQ"/>
    </DesignTime>
</Attribute>
...This is the bad working version
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityA"
Version="11.1.1.60.13"
DBObjectType="table"
DBObjectName="EntityA"
AliasName="EntityA"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="criminal.model.entities.filiative.EntityAImpl">
<DesignTime>
    <AttrArray Name="_publishEvents"/>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<Attribute
    Name="Entity_ID"
    IsUpdateable="while_insert"
    DefaultValue="@0"    //Different
    ColumnName="EntityA_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityA"
    PrimaryKey="true"
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntityA_SEQ"/>
    </DesignTime>
</Attribute>
... Hear is the constrain (the god one) related to the key att:
<Key
    Name="EntityAEntityAIdCheck10">
    <DesignTime>
      <Attr Name="_DBObjectName" Value="EntityA_EntitAy_ID_CHECK_10"/>
      <Attr Name="_checkCondition" Value='"EntityA_ID" IS NOT NULL'/>
      <Attr Name="_isCheck" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes"/>
</Key>
...Hear is the constrain (the bad one) related to the key att:
<Key
    Name="EntityAEntityAIdCheck10">
    <DesignTime>
      <Attr Name="_isNotNull" Value="true"/>
      <Attr Name="_DBObjectName" Value="EntityA_EntityA_ID_CHECK_10"/>
      <Attr Name="_checkCondition" Value='"EntityA_ID" IS NOT NULL'/>
      <Attr Name="_isCheck" Value="true"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="model.EntityA.EntityA_ID"/>
    </AttrArray>
</Key>
...Hear is the XML of the EntityB The differences are the same that in EntityA
the key att:
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityB"
Version="11.1.1.61.92"
DBObjectType="table"
DBObjectName="EntityB"
AliasName="EntityB"
BindingStyle="OracleName"
UseGlueCode="false">
<DesignTime>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <AttrArray Name="_publishEvents"/>
</DesignTime>
<Attribute
    Name="EntityBId"
    ColumnName="EntityB_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityB"
    PrimaryKey="true"
    IsUpdateable="while_insert"
    Domain="oracle.jbo.domain.DBSequence"
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_DisplaySize" Value="39"/>
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntityB_SEQ"/>
    </DesignTime>
</Attribute>
...this is the bad one
<Entity
xmlns="http://xmlns.oracle.com/bc4j"
Name="EntityB"
Version="11.1.1.60.13"
DBObjectType="table"
DBObjectName="EntityB"
AliasName="EntityB"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="model.EntityBImpl">
<DesignTime>
    <Attr Name="_codeGenFlag2" Value="Access"/>
    <AttrArray Name="_publishEvents"/>
    <Attr Name="_isCodegen" Value="true"/>
</DesignTime>
<Attribute
    Name="EntityB_ID"
    IsUpdateable="while_insert"
    ColumnName="EntityB_ID"
    SQLType="NUMERIC"
    Type="oracle.jbo.domain.DBSequence"
    ColumnType="NUMBER"
    TableName="EntityB"
    PrimaryKey="true"
    RetrievedOnInsert="true">
    <DesignTime>
      <Attr Name="_SequenceStart" Value="1"/>
      <Attr Name="_SequenceName" Value="EntityB_SEQ"/>
    </DesignTime>
</Attribute>
...the key (the god one)
<Key
    Name="FkEntityB">
    <DesignTime>
      <Attr Name="_isCascadeDelete" Value="true"/>
      <Attr Name="_referencedKey" Value="EntityA_PRIMARY_KEY_10"/>
      <Attr Name="_isForeign" Value="true"/>
      <Attr Name="_DBObjectName" Value="FK_EntityB"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="project1.EntityB.EntityBEntityBId"/>
    </AttrArray>
</Key>
...the bad one
<Key
    Name="FkEntityB">
    <DesignTime>
      <Attr Name="_isCascadeDelete" Value="true"/>
      <Attr Name="_referencedKey" Value="EntityA_PRIMARY_KEY_10"/>
      <Attr Name="_isForeign" Value="true"/>
      <Attr Name="_DBObjectName" Value="FK_EntityB"/>
    </DesignTime>
    <AttrArray Name="Attributes">
      <Item Value="project1.EntityB.EntityBEntityBId"/>
    </AttrArray>
</Key>
...Sorry if is too long.
What might be wrong? It's that enough to determine the error?
Thanks again.
PS: I did try look for NQ1 as kdario said and nothing was found. I had already done regenerate the association as 969750 said and still habe the same error.

Urgent: Why org.apache.tomcat.* package does not exist?

i am writing some programs about ldap
my program code has used some packages as the followings
import org.apache.tomcat.core.*;
import org.apache.tomcat.util.*;
import org.apache.tomcat.util.xml.*;
i am using apache + tomcat4.1 server, jsdk1.4
i have set the classpath that contains all the jar files in $TOMCAT_HOME\common\lib
after setting the classpath, i compiled the code
it said the above packages does not exist
where should i find those packages?
Aren't they in the tomcat i installed?
PLX HELP

for example, i want to use the class
org.apache.tomcat.core.Context to create a class
object.Then you would want to:
import org.apache.tomcat.core.Context;
-or-
import org.apache.tomcat.core.*;
Note how that is different than your original:
import org.apache.tomcat.*;i just use as an example import org.apache.tomcat
but i cannot find org.apache.tomcat.core or even any org.apache.tomcat.*
so that means i havn't include the correct jar file in the classpath or no corresponding package are stored in the tomcat4.1
i just want to know what jar file contains such stuff.
i think it should be a silly problem. So there should be someone know it.

HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

"File does not exist: /etc/apache2/htdocs/ABC/script" why?

Hey all,
on Linux error.log I go:
"File does not exist: /etc/apache2/htdocs/ABC/script" when I try to use the browser connecting to system. Why?
Any help is fine.
Thanks a lot in advance and best regards
Michael

get it myself
ip adress in wgate config has to be changed to default

A newbie problem - Why 'ORA-00942: table or view does not exist'

Hi,
I am a newbie having a very basic problem.
I have just created a table by reading in a CSV file.
However when I try to SELECT from it, I get an error message saying :-
ORA-00942: table or view does not exist
How can this be when I can see the table name ?
I have tried a couple of things that I found in the Discussion Forum, like 'ALTER SCHEMA' and 'GRANT SELECT'.
Neither seemed sensible because I have just created a table, and sure enough, neither helped.
It's disappointing that something so basic can go wrong.
I will be very grateful for any advice.
Barry

This tool and forum is awesome. I'm a developer that was never touched HTMLDB and now with in a month I'm developing applications quickly and when I have a question I have this active forum to ask my sometimes stupid and othertimes valid questions! This is great! I don't know where you all find the time to help out so much!
It is a little addicting though... I find myself sitting down Saturday morning just to spend a couple of minutes reading the posts and next thing I know hours have gone by as I use what I read because I can't wait until Monday...
Thank you all for everything!!!! HTMLDB, APEX, Javascript and now in another post I'm learning about "Fine Grained Access Control" or "Virtual Private Database".
Enjoy, BillC :>)

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

How to know when a topic does not exist

I have an app that is created with Visual Studio 6, which
does not have native support for HTML help (upgrading VS is
currently not an option). I have an HTML help that I would like to
call from my app. I need to call the html help with a context id
number. Since there is no html help calls in this version of VS, I
am calling hh.exe directly using ShellExecute ("hh.exe -mapid
<id> <chm file>"). I dont know of any other way. The
problem I am having is that there are times when my app and the
help may be out of sync. It is possible that my app will call the
help with an id that does not exist in the help. In WinHelp, the
user would get a message indicating that the topic did not exist.
Unfortunately, hh.exe does not return any messages. This makes the
users think something is wrong with the app.
Am I doing this the right way? Is there a way to find out if
a topic exists and notify the user if it does not?
Thanks in advance for you help.
LA

Hi LAYALA,
We also develop with Visual Studio 6. You can override the
WinHelp calls and redirect to HtmlHelp. Our app was originally
developed using WinHelp. We made the change to HTMLHelp several
years back and my developer claims it only took one line of code,
though he's never told me what that line is. If nobody enters into
this forum, I'll ask him tomorrow. I'm on Paciifc time so it will
be quite a few hours from now.
John

Why is there the error "The requested protocol does not exist comm:0" ?

Hi all,
I want to read data from a USB serial port of the mobile phone ( Alcatel OT-806D ). The cable connects the phone and the computer. The system running in the PC is Windows XP. I launch a java j2se program which writes a number to the usb serial port. And in my midlet I run a j2me which will read on the usb port. The problem is that the output displayed in the item on my midlet is "The requested protocol does not exist comm:0". So why there is this error , and how to correct it ?
Thank you very much

only protocol required to be suppoted by a j2me mobile device is http://: some vendors to implement more protcols like socket:// but this depends on the vendor...

HT5312 The link to reset security questions does not exist anywhere I have found...any know where I can get it?

Does anyone know how I can reset apple id security questions? In support they show a link but that does not existing anywhere that I can find. I just got a new phone and cannot buy anything without answering the questions but I cannot seem to get the answers right.

If you don't have the link then I assume that you don't have a rescue email address (which is not the same thing as an alternate email address) set up on your account, in which case see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

Does someone know why september of 1978 does not exist on my iPhone?

Similar Messages

Maybe you are looking for