Does Sonnet Express Card 34 eSata Work with Lion?

I am looking to see if the Sonnet Express Card 34 eSata  works with Lion OS

If your card is listed on the product site from Sonnet (e.g: http://www.sonnettech.com/product/tempo_sata_express34.html), you could get the answer by looking at the "Technical Specifications". Be sure that you're looking at the specifications of the correct card, since some seem to be compatible and some are not. Furthermore, if your card is based on the Silicon Image Sil3132 chip, it's (today) not supported. If there are any doubts left, try to connect Sonnet directly...

Similar Messages

  • Does Final Cut Studio 2 work with Lion?

    Does Final Cut Studio 2 work with Lion?

    As Final Cut Studio consists of several applications, either go to your System Profiler under Apple menu -> About This Mac -> More Info, and select Applications to determine which applications are PowerPC, or visit this website and check the version info of each application to see what works and what doesn't:
    http://roaringapps.com/apps:table

  • Does lightning SD card reader work with iPad Mini and iOS7?

    I order new iPad Mini Retina and wan to know;
    does the lightning SD card read works with iOS7?

    Yes.

  • Satellite P300-150 PSPC4E: Cannot get Express Card slot working with XP

    Hello.
    I have downgraded to XP on my machine and unfortunetly I am unable to get the Express card slot to work.
    The Intel chipset drivers on the Toshiba site haven't dont anything.
    I am trying to get an eSata port working via the express card like I did with Vista but no joy at all.
    Any ideas?
    Regards
    Rob

    Go to Device Manager and check if the express card is installed properly, or if its reporting an error.
    You should update the BIOS to the latest version. BIOS updates can sometimes fix problems like this.
    And ensure you have XP Service Pack 2 or 3 installed.

  • Does HP Color Laserjet 2840 work with Lion?

    I am considering upgrading from Snow Leopard to Lion.  Will my HP Color Laserjet 2840 work after the upgrade?

    I don't know if you have sorted this but I posted this elsewhere on the Forum. I have my HP 2840 working fine in Lion. Occasionally the Director software fires up and can't find the printer so I just turn the printer off then on and everything works OK.
    I got a reply from HP who said that they don't make the printer any more and so don't support it. It will only fax and print.
    Here is my post:
    Has anybody had the frustrating time that I have trying to get their precious HP LaserJet all-in-one scanner/fax/printer working under Lion?
    I have spent ages looking over the net and on HP's own site and worked out that formally Apple and HP only support printing on these machines now. The so-called in-built functionality of Lion using Image Capture or Preview etc simply won't work with the HP2840: the HP2840 does not appear as a scanner.
    Anyhow, I also found that the HP site does not sem to have the old drivers any more but fortunately I had them backed up in Time Machine so I found the old driver (LJMFP28x0OSX10.5Update-v8.2.dmg).
    I tried just running install but it falls over quickly as the 'Start here" link is broken. So I dug around the package and found an install app calle Aio. I ran this and after what seemed ages of countless loops and after the installation program closed down every other app running (I've never seen apps closed so quickly but this may be a Lion thing) the Mac re-booted.
    And hey presto! My scanner appears to be working. When it has finished I get the "HP Scan quit unexpectedly" window come up. But otherwise everything seems OK. I then ran the Mac software update and it (re-) installed the HP driver updates and the HP Director program still works and scanning is still available.
    If anyone else needs the .dmg file let me know and I will uplaod it somewhere. I assume you can post here and I will be notified.
    If someone knows more about this problem or can even get HP to do something better about the (lack of) support I'd be delighted to know.
    Good luck!
    KL

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • Acrobat 7.0 does not work with lion

    Why does my Acrobat profeesional 7.0 not work anymore. just installed Lion os.  Can this be fixed? Do I have to buy another version?

    Acrobat X Pro is the only version Adobe states works with Lion. You'll have to upgrade.

  • Does Drobo work with Lion?

    I use the Drobo Unit to backup my Mac Pro. I've heard it's software doesn't work with Lion? Can someone verify this?

    For DROBO Gen 1 (no FW)
    Does my Gen 1 Drobo work on Mac OS X Lion?
    If you are not sure if your Drobo is a Gen 1 or a Gen 2, look at the back of the unit for a FireWire connection, which indicates that you have a Gen 2 Drobo.
    If your unit does not have a FireWire connection, then you have a Drobo Gen 1. While Drobo Gen 1 is no longer supported, we will continue to release updates for critical issues like support for Lion. In the meantime, if you want to upgrade to Lion, follow the steps below:
    Safely shut down your Drobo prior to upgrading the OS.
    Upgrade to Mac OS X Lion.
    Important! Do NOT perform any volume management changes (like creating new volumes or formatting from Drobo Dashboard or from Disk Utility) until you receive the new firmware update that will make your Drobo 4-bay Gen 1 compatible with Lion. To be notified of the latest software updates from Drobo, subscribe to this article: I would like to recieve email notifications when new software is released for my Drobo
    For more information on Drobo Gen 1 and DroboShare support please read KB 594, KB 598 and KB 65.

  • Does Logic Pro 9.0 work with Mac OS X Lion?

    I don't want to update to Mac OS X Lion from Snow Leopard until I know 100% that Logic Pro 9.0.0 is compatible with it.
    On a side note, would Final Cut Pro 7.0 work with Lion as well (I will not be upgrading to Final Cut Pro X)?
    Thank you!

    Okay peoples, I have great news!
    I was told that maybe the update for Logic Pro 9.0.0 to 9.1.4 wasn't working for me because I must have renamed my software folder... and I remembered doing so back in 2010.
    You see, my issue was:
    I bought Logic Studio 8 (The big box with piano keys on the side) and then as soon as I did, Logic Pro 9 (the update version) came out. I was inclined to get the latest software, so I upgraded immediately. I remember wondering why my logic pro 8 stayed behind after the update so I foolishly renamed the folders "Logic Pro 8" and "Logic Pro 9" haha. Not knowing this would cause me grief later when I tried to update.
    So, my Logic Pro 9 is working again fine. My only concern now is for the hardware (the Apogee Duet) I am using, as I have to wait for a Lion update in August, thankfully it is only a month away as apposed to 6
    Cheers,
    and I hope this helps.
    Tuck

  • Keynot does not work with Lion OSX 10.7.2

    First there was the problem with the hidden Library/application Support/iWeb/domaines, which is an important problem for me as I use my web site to show people what kind of work that I do (videos with still photography); now there's the problem with Keynote, which does not even open with Lion OSX 10.7.2. Up until now, I was using Keynote to do my video projections in small town halls. I use Protools for the sound and Final Cut (that's another problem!) for the photos and then do a Quick Time session which I put in Keynote. It was working just fine - until Lion came along.
    It seems to be well known that Apple is going to discontinue iWeb (let's not talk about what they did to Final Cut) - and now it looks like they've got plans for Keynote as well. It looks like the solution is either to use PowerPoint rather than Keynote, or to downgrade back to Snow Leopard. I'm tempted to change to PowerPoint just to keep in the race, but where is Apple taking us? I'm not sure that what Apple want's us to do is really good for us! But is it realistic to hang on to Snow Leopard? Are the PCs better or are they doing the same thing? It almost seems as if there were commercial agreements between those who run everything...but that's another story - or is it?
    Théo

    Yes, it should work with Lion.  It does for lots of folks.
    Are you getting an error message of some sort?  If so, see #C2 in Time Machine - Troubleshooting.
    If that doesn't help, try re-selecting it, via Time Machine preferences.
    Or try a "full reset" of Time Machine, per #A4 in the Troubleshooting article.
    Or reset the TC itself, per http://support.apple.com/kb/ht3728

  • Why does Corel Suite 10 does not work with Lion OS?

    Why does Corel Suite 10 does not work with Lion OS?

    Either it's incompatible or it's a PPC-only application. PPC applications are no longer supported in Lion because there is no longer a Rosetta emulator. Contact Corel for support.

  • How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

    My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

    Did you try removing the printer from the queue and then reinstalling it?
    I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
    I opened System Preference > Print & Scan and deleted the printer.
    I then added the printer back and it now working again. Worth a shoot first I should think.
    Much easier the a downgrade.
    Allan

  • My cannon printer worked with snow leopard but does not work with Lion

    My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

    Have you downloaded and installed the latest Canon printer drivers?
    http://support.apple.com/kb/DL899

  • Does anyone know how to make WireTap Studio work with Lion?

    I installed Lion in August, but I have been so busy that I haven't tried to use some of my applications with it until now. One of my favourite sotware suites, Wire Tap Studio, does not seem to be compatible with Lion. This is more than disappointing; it is such a disappointment that I am prepared to ditch Lion and go back to Snow Leopard, if I knew how. Has anyone had a similar experience, and is there a solution?

    I am a bit late to the party . Just discovered that wiretap studio no  longer works..Ive regularly  upgraded the OS and recently  I upgraded to  Yosemite and its the first time  I've had this issue.
    I cant wiretap other than  via a mic  which results in crappy  sound. Apparently Ambrosia are not going to  make a fix..
    Anyone   know of an alternative that can capture sound internally without the  use of a mic the way  wiretop  did.   Ive looked at  MixPAd... It doesnt capture internal sound as far as I can see   and Onedesof Audio recorder   came with a Firefox  Warning about  possible corruption  or tampering .
    I want to capture  good quality sound so I can study the arrangements  without  background  noise filtering  in  via  a  mic.

Maybe you are looking for