Does Spatial support "Earth Centered, Earth Fixed" to Lat/Long conversion?

Does Spatial support "Earth Centered, Earth Fixed" to Lat/Long conversion? I've looked in coordinate list table but don't see "ECEF" (or anything that might by a synonym for ECEF) listed.
Thanks,
Julien

Spatial does not support ECEF coordinates at this time, nor conversions to/from longitude, latitude, and height above the ellipsoid. It is possible that Spatial will support ECEF in a future release of the product.

Similar Messages

Newbie: Earth Centered Earth Fixed - Lat/Long Conversion, can it be done w/ Spatial?

This is an information request from a complete coordinate systems newbie:
1. Does Oracle Spatial in 9.0.1 have an entry in MDSYS.CS_SRS that
corresponds to the coordinate system commonly known as "Earth Centered, Earth
Fixed" - where would I look (besides the table itself - I already tried that
with the 8.1.7 EE to no avail - it may be because I don't know enough about how
coordinate systems are referenced (the common nomenclature used) and just
didn't recognize it when I saw it.)
2. Are there any existing pl/sql snippets of code that can handle coordinate
conversions between ECEF-Lat/Long, geodetic degrees-decimal degrees? (If yes,
where should I go to look for them? By the way, please, please say yes, there
are many such packages just like there are for unit conversions (like binary to
hex).)
3. Where should I look to get information on a product called Map Viewer which
was mentioned in the latest edition of Oracle Magazine (May/June 2002, p.25 -
it was said to be a part of the 9iAS suite of products - I looked all over the
documentation but didn't find any mention of it.)
Thank you very much for your time and attention!
Julien

This is an information request from a complete coordinate systems newbie:
1. Does Oracle Spatial in 9.0.1 have an entry in MDSYS.CS_SRS that
corresponds to the coordinate system commonly known as "Earth Centered, Earth
Fixed" - where would I look (besides the table itself - I already tried that
with the 8.1.7 EE to no avail - it may be because I don't know enough about how
coordinate systems are referenced (the common nomenclature used) and just
didn't recognize it when I saw it.)
2. Are there any existing pl/sql snippets of code that can handle coordinate
conversions between ECEF-Lat/Long, geodetic degrees-decimal degrees? (If yes,
where should I go to look for them? By the way, please, please say yes, there
are many such packages just like there are for unit conversions (like binary to
hex).)You can get the proper params from the EPSG <http://www.epsg.org>,
I recall seeing some coord conversion samples in the tutorials/sample code - look in the OTN library
MArk

I downloaded Firefox 4 which my iBook G4 does not support. How can I revert to the earlier version of Firefox?

A box showed up that said "this architecture does not support Firefox 4." Firefox was no longer available on my laptop. Leopard is my OS. (Highest it will go)

Do you recall whether your iBook G4 could run Firefox 3.6? If so, you can download it here: http://www.mozilla.com/en-US/firefox/all-older.html
If you were using 3.5 or earlier, finding it is a bit trickier.
You probably want to backup your profile folder before uninstalling Firefox 4. See [http://support.mozilla.com/en-US/kb/Backing%20up%20your%20information Backing up your information | How to | Firefox Help].

[svn] 3045: Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Revision: 3045
Author: [email protected]
Date: 2008-08-29 10:59:25 -0700 (Fri, 29 Aug 2008)
Log Message:
Fix FB-13900: Expression Evaluator: 'is' and 'as' expressions return 'Target player does not support function calls'
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-13900
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/BinaryOp.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

Does it have a feature that supports management with accounts, fixed IP, VLAN ?

I'm not quite familiar with those advanced features if it does exist as the fact that i've been primarily using cheap and unknown AP products for years :D I'm planning on upgrading my APs for personal reasons. Could anyone tell me does it have a feature that likely supports management with accounts, fixed IP, VLAN? What is it called and which product could fit my needs?
Thanks.

My name Eric Moyers. I am an Engineer in the Small Business Support Center.
Thank you for the question. Currently all of our Small Business Wireless Access Points support Management accounts, fixed ip's and vlans.
Here is a link for some model comparisons.
http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html
http://www.cisco.com/c/en/us/products/wireless/small-business-100-series-wireless-access-points/models-listing.html
http://www.cisco.com/c/en/us/products/wireless/small-business-300-series-wireless-access-points/models-comparison.html
http://www.cisco.com/c/en/us/products/wireless/small-business-500-series-wireless-access-points/models-comparison.html
If you have any other questions or some specific questions, I am most happy to answer them. You can repost here or if you mouse over my picture you will see my email and can email me directly.
Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered.

Recently got new iMac with Lion.....when I try to load my LogicPro software, I get 'OS does not support power PC'. Is there a download to fix or must I spend another 500 on software?

Recently got new iMac with Lion.....when I try to load my LogicPro software, I get 'OS does not support power PC'. Is there a download to fix or must I spend another 500 on software?

What version of Logic do you have?
And if you end up upgrading, it's only $199 now.

Why Does AppleScript Fail With Google Earth?

This simple script:
     tell application "Google Earth"
            GetCurrentVersion
     end tell
fails with the following error:
     error "Google Earth got an error: Can’t continue GetCurrentVersion." number -1708
and with the following Console message:
     3/2/13 5:24:42.505 PM Google Earth[53575]: +[NSDictionary scriptingRecordWithDescriptor:]: unrecognized selector sent to class 0xacdb248c
Anyone know why?
The GE AppleScript dictionary has the following entry:
GetCurrentVersion v : Get the current version of the Google Earth client
      GetCurrentVersion record : record of major, minor and build numbers
→ list of integer : version fields
AppleScript and Google Earth work fine for other users on this machine. It only fails on my account.
I have tried deleting all vestiges of GE from the machine and reinstalling, but this hasn't worked.
Any other ideas?

tell application "System Events" to get has scripting terminology of application process "Google Earth"
Result=true
AFAIK, AS works with all other applications. It only fails with GE and only on my account.
softwater, I apologize if my original post was not specific enough.
I thought that the title "Why Does AppleScript Fail With Google Earth?" made it clear that the AS failure was with GE. I guess not.
Message was edited by: Buadhai

Pandora message "Pandora believes your browser does not support modern SSL/TLS" and everything seems disabled on the site-how fix?

I have been using Firefox for a long time as my browser and typically play Pandora while at my office most days. For the first time today I received a pop up message "Pandora believes your browser does not support modern SSL/TLS. Consider upgrading your browswer" when I logged on to Pandora. I checked and I am on the latest version of Mozilla Firefox. I am unable to control volume or log out of Pandora now. I did some google searches and found Mozilla disabled ssl3.0 due to a "Poodle" attack. Does that mean that I can no longer use Firefox as my browser when I want to listen to music on Pandora or is there "a fix"? Thanks!

Mozilla Firefox as of Firefox 34 has the vulnerable SSL 3.0 disabled and only allows for TLS 1.0 at minimum to 1.2 now.
https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/
So Pandora is incorrect if they believe Firefox is not safe to use.
Actually Pandora potentially needs to do a bit of upgrading themselves.
https://www.ssllabs.com/ssltest/analyze.html?d=www.pandora.com&s=208.85.40.50

IMac does not support Power PC. A fix?

My iMac does not support Power PC. Is there a Reader fix?

If your Mac is PowerPC the latest version that you can run is Reader 9.4. Adobe stopped ALL development of PowerPC versions of software in November of 2010, and Apple doesn't even support PowerPC Macs or software anymore. It may not be what you want ot here, but your Mac is obsolete.

I bought a movie on iTunes and it keeps stoping the download saying that i need quicktime and my iTunes does not support it. i have already paid for the movie so what do i do to fix this

i just bought a movie on itunes. everytime the movie starts to download it stops and when i click on it it says that it needs quictime and my itunes does not support it. what do i do?

How to report an issue with Your iTunes Store purchase

I keep getting an error message that says the safari browser version you are currently using does not support the community toolbar. how do I fix it?

Everytime I open my imac I get an error message that says: "We're sorry but the Safari browser version your are currently using does not support the community toolbar." I can't see where it affects anything else, but getting an error message on an imac, just doesn't seem right, ya know? How can I get rid of the message.

Apparently an add-on named Community Toolbar was installed at one time, and is causing the problem. To get rid of it, quit Safari, then throw away these files -
Macintosh HD/Library/Application Support/Conduit
Macintosh HD/Library/InputManagers/CTLoader
Macintosh HD/Library/Receipts/ctloader.pkg
Macintosh HD/Library/Receipts/<Toolbar name>.pkg
Macintosh HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
Macintosh HD/Users/<User name>/Library/Application Support/Conduit
Note - if you are using Lion, the Library folder in your home folder (user name folder) is hidden. To get into it, in Finder open the Go menu; with that menu open, press and hold the Option key. An item "Library" will be added to the list, and can then be selected. That will open the Library folder in your home folder.

Getting messages that Safari does not support gmail. I use OS X 10.6.8 with all current software updates. Fix?S X 6.

Keep getting message saying current version of Safari does not support gmail, but I seem to have latest version (5.0.5). Is there an update I need?
Poroblem goes away when I use Chrome.

Several older browser versions and ones that won't be upgraded without
a major system upgrade (a new OS X, if one is supported in hardware)
get similar messages when using Gmail & perhaps other google access.
If you want to experiment a little and the cost is zero, see the iCab browser
that is shareware but runs free with annoying prompt to buy a license, that
can be set to appear as Safari 6 to various web sites including Gmail. I've
tried it, and that does work. The iCab version that I found helpful works in
either PPC or Intel Mac OS X 10.5 ~ 10.7, there is a later version, too.
There is a recent iCab v.5.5 or an older iCab 5.1.1, since you could use
the more recent, I'd suggest that version over the older one which I have.
See http://www.icab.de/dl.php for iCab 5.5 (30.10.2014 or note a direct
DL link to that, here: iCab_5.5_Intel.zip -- either version is 32/64 bit.
Hopefully you can use the additional options without an OS X upgrade
to later system such as Lion. Sometimes an upgrade goes fine, but
there are good reasons to make a fully bootable clone on external HDD.
Then you could revert to a working copy of what you had before upgrade.
PS: If you are seeing two Safari versions in the Application folder, you
could use Get Info on each (separate, highlight one at a time) to find
what one is newest; then put the older one in Trash. Do not delete it yet.
The icon for Safari in the Dock may need to be replaced by dragging
the new Safari into the Dock, after dragging the old icon out of it...
but generally that part should not be necessary if only one Safari is
in the Applications folder. Be sure to not leave an app in the desktop
when it should be found by OS X in the Application folder.
The newer Safari should be in the Applications folder. Is it?
Check the Downloads folder in the Dock, to see where it went.
Sometimes, the browser's download info will show a history;
you can choose where downloads get stored.
Good luck & happy computing!
edited 2x

Why the iPod Touch does not support GPS Bluetooth Reciever

Why the iPod Touch does not support Bluetooth GPS.
I had to make a jailbreak justto install and use roqyBT a Bluetooth GPS receiver,
This aplication run witch these software:
TomTom
Navigon
iGO
Maps
Google Earth
Around me
And run wich several receives as iBT 747, QSTARZ Q-1000, Holux M-1000 and my Nokia LD-3W.
But I didn´t like to use Jailbreak, I only make the jailbreak to use a GPS bluetooth.

Ipod touch supports bluetooth for stereo headsets/speakers and some peer to peer apps from the app store.
Why is not a question that can be answered here.
Only Apple would know.

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

Does Spatial support "Earth Centered, Earth Fixed" to Lat/Long conversion?

Similar Messages

Maybe you are looking for